4X4 Ralleys 4sale 6 hole - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARIOS68PANEL · 03-19-2005, 01:19 PM

I have these 4x4 Rallys sitting in the yard .I took them off my 68panel.
But they are 1983 wheels I think. The rubber no them is trash. I will remove the tires if it matters to you. I think they are 15 x 8 or x 10 and they are 6 lug. they are dirty and rusty . Mostly on the back sides. Best offer

GMC AMI · 03-19-2005, 03:45 PM

Trim rings and caps? Any PICS? Any shipping? A price should be listed according to rules. Good luck with your sale.

MARIOS68PANEL · 03-19-2005, 07:06 PM

Sorry I didnt read the rules.I should have. The pictures didnt come up on here for some reason . I will e-you some. And I will try to post them here again. There are center caps two open for 4x4 hubs two arent. There areb two original trim rings and two from god knows where. They are dirty and rusty but I think they could be saved. I would probly take 50 bucks for them just to get them to someone who would do something with them. as far as shipping goes , It would cost more than I want for the rims to shgip . But if the buyer pays , I`LL ship Thanks for the info too.

GMC AMI · 03-19-2005, 07:38 PM

Thank you Mario!

MARIOS68PANEL · 03-19-2005, 09:51 PM

Hope they show up this time. Im haven trouble posting pictures

GMC AMI · 03-20-2005, 07:24 AM

Good deal for 50! Somebody should buy them, good luck.

Sooner1970_K10 · 03-20-2005, 09:08 AM

I am interested. However to me it would matter if they were 8's or 10's. I dont suppose you would unmount one of the wheels and measure? Anyone that ships a lot have any idea what it would cost to ship the rims, trim and caps from CA to OK?

nitor · 03-20-2005, 09:49 AM

I'd take them if you weren't so far away. The shipping would be huge.

olblue60@aol.com · 03-20-2005, 09:56 AM

I bought a stock set of 15x8s and shipping was around $17 ea.

MARIOS68PANEL · 03-20-2005, 12:24 PM

I will find out today if they are 8 or 10 . Is the measurment done inside the rim or from outside edge to outside edge?

**BAD4X4** · 03-20-2005, 01:56 PM

Those sure look like stock 8" wide wheels to me, and I have like 6 sets of them..

extd56 · 03-20-2005, 08:32 PM

Let me know if you still have the wheels, do they all have the center caps and beauty rings? I can pick up, I am local in vacaville.

03-19-2005, 01:19 PM	#1
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	4X4 Ralleys 4sale 6 hole I have these 4x4 Rallys sitting in the yard .I took them off my 68panel. But they are 1983 wheels I think. The rubber no them is trash. I will remove the tires if it matters to you. I think they are 15 x 8 or x 10 and they are 6 lug. they are dirty and rusty . Mostly on the back sides. Best offer __________________ 67 short step 71 Custom

03-19-2005, 03:45 PM	#2
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Trim rings and caps? Any PICS? Any shipping? A price should be listed according to rules. Good luck with your sale. __________________ 1968 Chevy 4x4 307 4 speed

03-19-2005, 07:06 PM	#3
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Sorry I didnt read the rules.I should have. The pictures didnt come up on here for some reason . I will e-you some. And I will try to post them here again. There are center caps two open for 4x4 hubs two arent. There areb two original trim rings and two from god knows where. They are dirty and rusty but I think they could be saved. I would probly take 50 bucks for them just to get them to someone who would do something with them. as far as shipping goes , It would cost more than I want for the rims to shgip . But if the buyer pays , I`LL ship Thanks for the info too. __________________ 67 short step 71 Custom

03-19-2005, 07:38 PM	#4
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Thank you Mario! __________________ 1968 Chevy 4x4 307 4 speed

03-19-2005, 09:51 PM	#5
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	The rims Hope they show up this time. Im haven trouble posting pictures Attached Images __________________ 67 short step 71 Custom

03-20-2005, 07:24 AM	#6
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Good deal for 50! Somebody should buy them, good luck. __________________ 1968 Chevy 4x4 307 4 speed

03-20-2005, 09:08 AM	#7
Sooner1970_K10 1970 K10, 350, 4spd! Join Date: Jun 2004 Location: Shawnee, Ok Posts: 128	I am interested. However to me it would matter if they were 8's or 10's. I dont suppose you would unmount one of the wheels and measure? Anyone that ships a lot have any idea what it would cost to ship the rims, trim and caps from CA to OK?

03-20-2005, 09:49 AM	#8
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	I'd take them if you weren't so far away. The shipping would be huge. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

03-20-2005, 09:56 AM	#9
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	I bought a stock set of 15x8s and shipping was around $17 ea. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

03-20-2005, 12:24 PM	#10
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	I will find out today if they are 8 or 10 . Is the measurment done inside the rim or from outside edge to outside edge? __________________ 67 short step 71 Custom

03-20-2005, 01:56 PM	#11
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Those sure look like stock 8" wide wheels to me, and I have like 6 sets of them.. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

03-20-2005, 08:32 PM	#12
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Let me know if you still have the wheels, do they all have the center caps and beauty rings? I can pick up, I am local in vacaville.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.