WTB: floor/rocker repair patches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

saxmo · 03-20-2005, 09:45 PM

Hey guys, I'm finally tired of the driver side front wheel throwin' dirt on my left shoe. There be a hole where a floor should be..not to mention the way the door shakes is a bit scary... This is a 1969 C10 Panel, so I need the inner/outer rocker, driver floor pan and the "cab" support (under the driver seat, where the big bolt and grommet go). All for the driver side. I also need, but much less urgent, the rocker that runs down the driver side between the door and the rear wheel well. Thanks

saxmo · 03-21-2005, 02:58 PM

here are the pictures of the cancerous areas.

saxmo · 03-21-2005, 02:58 PM

some more

67ChevyC10Stepside · 03-21-2005, 05:42 PM

wow...surprising to see rust like that in texas...

saxmo · 03-21-2005, 06:02 PM

i purchased the panel from Delaware...salt. But, the rest is in pretty good shape

03-20-2005, 09:45 PM	#1
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	WTB: floor/rocker repair patches Hey guys, I'm finally tired of the driver side front wheel throwin' dirt on my left shoe. There be a hole where a floor should be..not to mention the way the door shakes is a bit scary... This is a 1969 C10 Panel, so I need the inner/outer rocker, driver floor pan and the "cab" support (under the driver seat, where the big bolt and grommet go). All for the driver side. I also need, but much less urgent, the rocker that runs down the driver side between the door and the rear wheel well. Thanks __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-21-2005, 02:58 PM	#2
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	pix of problem areas here are the pictures of the cancerous areas. Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-21-2005, 02:58 PM	#3
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	some more Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-21-2005, 05:42 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wow...surprising to see rust like that in texas... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

03-21-2005, 06:02 PM	#5
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	i purchased the panel from Delaware...salt. But, the rest is in pretty good shape Attached Images __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.