Ford 9 inch Disc Brakes F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 10-04-2004, 10:33 PM

I have a 9 inch rear with factory disc brakes for sale .It is out of the bic car line of Fords and has the 5 on 5 inch bolt pattern that is the same as Chevy trucks. It is complete .I do not know what gear and I am sure that it isnt a posi .I will let it go for $200 .I may be able to meet you to save on shipping. It is in Bryan,Tx. 979-272-9403 or frankm@tconline.net .My email has been slow lately. I do not want to ship this so I guess it is for Texas members or surrounding states. Frank

ocbaud · 10-04-2004, 11:06 PM

i'm interested. whats the length of it?? how well will it fit under one of our trucks?

cochran63 · 10-04-2004, 11:14 PM

I have the same rearend in my 63. I ended up making some brackets and using 72 chevy front calipers because the ford calipers were about 100 a piece and a lifetime 72 caliper is 20 bucks, and it makes buying pads easier since the front are the same as the back.

ocbaud · 10-09-2004, 05:53 PM

any update?

f.monroe · 10-09-2004, 07:27 PM

I will get the pics to you tomorrow.I have been plenty busy at work lately and it seems that it is dark every night when I get home.Frank

Myride · 10-11-2004, 11:02 AM

How much to ship to Milwaukie Oregon 97222. Thanks

ocbaud · 10-11-2004, 12:04 PM

Quote:

Originally Posted by f.monroe

I do not want to ship this so I guess it is for Texas members or surrounding states. Frank

it would cost a lot to ship i'm guessing

f.monroe · 10-11-2004, 10:28 PM

I shipped two different 12 bolt car rears .One to Michigan and one to Minnesota.They were both over $200 to ship which would double the price. Oc ,did you get the PM yesterday. I am having trouble getting a picture. Camera and comp probs. It is a heavy 9 inch that is about 63.5 inches wide at the wheel mounting flanges. If I can get my act together OC is first in line I think. Frank

f.monroe · 01-09-2005, 01:16 AM

Still have this rear . $150 Anyone? I need to get it out of the way.Frank

low 84 · 01-14-2005, 01:17 AM

any idea on the gear ratio? and do you know the width?

dapolice1 · 01-23-2005, 01:44 AM

Quote:

Originally Posted by f.monroe

Still have this rear . $150 Anyone? I need to get it out of the way.Frank

I might be if the mounting is close to an 88-98 chevy truck rear.
If you know let me know. I am not worried about the perch distance but rather the wheel mounting surface to wheel mounting surface.

phantom dually · 01-23-2005, 01:47 AM

Why are all the good deals so far away??

SCOTI · 01-23-2005, 04:33 PM

To eliminate the issue w/the early disc hardware, would later model Ford explorer parts work to update the rear discs?

f.monroe · 01-23-2005, 08:57 PM

I am sure it is a 2.xx gear non posi since it came out of a luxury car .It is dirty and has a lot of mounting brackets that it used for the car that would have to be removed but I have seen them under trucks before .I tried to measure the width and it looks like 63 1/2 " from flange to flange ( where the wheels bolt on ). I dont have a truck rear to compare it to right now .Anyone know what the width of a Chevy truck rear is ? Please post it . Frank

dapolice1 · 01-24-2005, 01:48 AM

I am intrested if your other buyer backs out. I just need to verify the length of my current axle and make sure I can get the proper offset in the wheels I want.
Can you tell me the distance in between the axle tube flanges, so I can make sure I can weld in my spring perches and make it work.

f.monroe · 03-21-2005, 10:54 PM

SOLD!!!!!!!!!!!!!!!!!!!!!!!!

Heres my hood that I looked so long for .
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

I almost missed it .I just had time to log on and put in a maximum bid .I am glad to see that I got it for only $81 .

10-04-2004, 10:33 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Ford 9 inch Disc Brakes F/S I have a 9 inch rear with factory disc brakes for sale .It is out of the bic car line of Fords and has the 5 on 5 inch bolt pattern that is the same as Chevy trucks. It is complete .I do not know what gear and I am sure that it isnt a posi .I will let it go for $200 .I may be able to meet you to save on shipping. It is in Bryan,Tx. 979-272-9403 or frankm@tconline.net .My email has been slow lately. I do not want to ship this so I guess it is for Texas members or surrounding states. Frank

10-04-2004, 11:14 PM	#3
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	I have the same rearend in my 63. I ended up making some brackets and using 72 chevy front calipers because the ford calipers were about 100 a piece and a lifetime 72 caliper is 20 bucks, and it makes buying pads easier since the front are the same as the back. __________________ Youth soon passes away, but immaturity can last a life time.

01-09-2005, 01:16 AM	#9
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Rear Still have this rear . $150 Anyone? I need to get it out of the way.Frank

01-14-2005, 01:17 AM	#10
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	any idea on the gear ratio? and do you know the width? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

01-23-2005, 01:47 AM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Why are all the good deals so far away?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-04-2004, 11:06 PM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i'm interested. whats the length of it?? how well will it fit under one of our trucks?

10-09-2004, 05:53 PM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	any update?

10-09-2004, 07:27 PM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I will get the pics to you tomorrow.I have been plenty busy at work lately and it seems that it is dark every night when I get home.Frank

10-11-2004, 11:02 AM	#6
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	How much to ship to Milwaukie Oregon 97222. Thanks

10-11-2004, 10:28 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I shipped two different 12 bolt car rears .One to Michigan and one to Minnesota.They were both over $200 to ship which would double the price. Oc ,did you get the PM yesterday. I am having trouble getting a picture. Camera and comp probs. It is a heavy 9 inch that is about 63.5 inches wide at the wheel mounting flanges. If I can get my act together OC is first in line I think. Frank

01-23-2005, 04:33 PM	#13
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	To eliminate the issue w/the early disc hardware, would later model Ford explorer parts work to update the rear discs? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-23-2005, 08:57 PM	#14
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	rear I am sure it is a 2.xx gear non posi since it came out of a luxury car .It is dirty and has a lot of mounting brackets that it used for the car that would have to be removed but I have seen them under trucks before .I tried to measure the width and it looks like 63 1/2 " from flange to flange ( where the wheels bolt on ). I dont have a truck rear to compare it to right now .Anyone know what the width of a Chevy truck rear is ? Please post it . Frank

01-24-2005, 01:48 AM	#15
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	I am intrested if your other buyer backs out. I just need to verify the length of my current axle and make sure I can get the proper offset in the wheels I want. Can you tell me the distance in between the axle tube flanges, so I can make sure I can weld in my spring perches and make it work.

03-21-2005, 10:54 PM	#16
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Rear SOLD!!!!!!!!!!!!!!!!!!!!!!!! Heres my hood that I looked so long for . http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT I almost missed it .I just had time to log on and put in a maximum bid .I am glad to see that I got it for only $81 . Last edited by f.monroe; 04-03-2005 at 10:29 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.