3/4 ton long bed chassis and bed $50 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

luckydog · 03-17-2005, 04:02 PM

I'm mainly just looking to get it out of here. I robbed the cab/front sheetmetal, and I will probably pull the motor/trans, so you can have the frame,suspension, rearend, and bed for $50. Truck is a 68 GMC 3/4 ton longbed. If your interested, respond HERE first, then you can send me a pm.

1969 GMC · 03-17-2005, 04:46 PM

is it fleetside or stepside?

luckydog · 03-17-2005, 07:51 PM

Fleetside... My bad.

Lund1650 · 03-17-2005, 08:06 PM

What condition is the bed in? Do you have any pics?

luckydog · 03-17-2005, 11:07 PM

The bed is in decent shape, pretty solid. But there's a pretty good dent on the passenger side. If you're seriously interested, I'll snap some pics tomorrow. I gotta quit bein lazy, and post pics right away.

wannabeburbowner · 03-17-2005, 11:26 PM

Just to push you on posting pics, I am also have slight interest in it.

Thanks,

Travis

GMCPerson · 03-18-2005, 08:38 AM

I am also interested if you still have it available. How far are you from Ann Arbor? I would have to find a way to get it to me. Paul

luckydog · 03-18-2005, 11:26 AM

I'm a solid 3 hours from ann arbor, I think. I will get pics as soon as possible. The truck was undercoated, and the frame and bed are solid, except for the dent previously mentioned.

orange72blazer · 03-18-2005, 12:10 PM

Im interested also, need to see pics though.

Lund1650 · 03-18-2005, 12:42 PM

I would like to see pics of it first. I am only located about 1.5 hrs away. I am very interested in the bed.

GMCPerson · 03-18-2005, 01:36 PM

3 hours is acceptable please keep me in line and send/post pictures. Thanks Paul

Lund1650 · 03-19-2005, 07:14 PM

Still waiting on pics. I am still interested in the box.

luckydog · 03-20-2005, 11:37 PM

Here's your pics. Closer inspection revealed some quarter-sized holes in the bed floor. The rust areas look worse than they are, I didn't find anything that wasn't fixable. Chassis is solid, the original paint is visible on the top of the framerail.

My dad offered me $50 for it to make a trailer out of it. So if it's worth more than that to you, then make an offer. I guess best offer takes it.

GMCPerson · 03-21-2005, 07:42 AM

I still have not found a way to get it to me. I will step out of line until if/when I do. Paul

luckydog · 03-21-2005, 02:47 PM

At this point Lund has dibs on the bed. The is frame still available. Thanks.

Paul72 · 03-21-2005, 05:33 PM

May be interested in the bed. Please put me in line.

Thanks,

Paul

luckydog · 03-22-2005, 09:18 AM

ttt

03-17-2005, 04:02 PM	#1
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	3/4 ton long bed chassis and bed $50 I'm mainly just looking to get it out of here. I robbed the cab/front sheetmetal, and I will probably pull the motor/trans, so you can have the frame,suspension, rearend, and bed for $50. Truck is a 68 GMC 3/4 ton longbed. If your interested, respond HERE first, then you can send me a pm. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

03-17-2005, 04:46 PM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	is it fleetside or stepside? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-17-2005, 07:51 PM	#3
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Fleetside... My bad. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

03-17-2005, 11:07 PM	#5
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	The bed is in decent shape, pretty solid. But there's a pretty good dent on the passenger side. If you're seriously interested, I'll snap some pics tomorrow. I gotta quit bein lazy, and post pics right away. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

03-17-2005, 11:26 PM	#6
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	Just to push you on posting pics, I am also have slight interest in it. Thanks, Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

03-17-2005, 08:06 PM	#4
Lund1650 Registered User Join Date: Jan 2005 Location: Saginaw, Michigan Posts: 25	What condition is the bed in? Do you have any pics?

03-18-2005, 08:38 AM	#7
GMCPerson Junior Member Join Date: Oct 2003 Location: Milford, MI Posts: 192	I am also interested if you still have it available. How far are you from Ann Arbor? I would have to find a way to get it to me. Paul

03-18-2005, 11:26 AM	#8
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	I'm a solid 3 hours from ann arbor, I think. I will get pics as soon as possible. The truck was undercoated, and the frame and bed are solid, except for the dent previously mentioned. __________________ Horsepower is how FAST you hit the wall, torque is how HARD

03-18-2005, 12:10 PM	#9
orange72blazer Registered User Join Date: Dec 2003 Location: West Michigan Posts: 447	Im interested also, need to see pics though.

03-18-2005, 12:42 PM	#10
Lund1650 Registered User Join Date: Jan 2005 Location: Saginaw, Michigan Posts: 25	I would like to see pics of it first. I am only located about 1.5 hrs away. I am very interested in the bed.

03-18-2005, 01:36 PM	#11
GMCPerson Junior Member Join Date: Oct 2003 Location: Milford, MI Posts: 192	3 hours is acceptable please keep me in line and send/post pictures. Thanks Paul

03-19-2005, 07:14 PM	#12
Lund1650 Registered User Join Date: Jan 2005 Location: Saginaw, Michigan Posts: 25	Still waiting on pics. I am still interested in the box.

03-20-2005, 11:37 PM	#13
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	Here's your pics. Closer inspection revealed some quarter-sized holes in the bed floor. The rust areas look worse than they are, I didn't find anything that wasn't fixable. Chassis is solid, the original paint is visible on the top of the framerail. My dad offered me $50 for it to make a trailer out of it. So if it's worth more than that to you, then make an offer. I guess best offer takes it. Attached Images __________________ Horsepower is how FAST you hit the wall, torque is how HARD

03-21-2005, 07:42 AM	#14
GMCPerson Junior Member Join Date: Oct 2003 Location: Milford, MI Posts: 192	I still have not found a way to get it to me. I will step out of line until if/when I do. Paul

03-21-2005, 02:47 PM	#15
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	At this point Lund has dibs on the bed. The is frame still available. Thanks. __________________ Horsepower is how FAST you hit the wall, torque is how HARD



Register or Log In To remove these advertisements.

03-21-2005, 05:33 PM	#16
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	May be interested in the bed. Please put me in line. Thanks, Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

03-22-2005, 09:18 AM	#17
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	ttt __________________ Horsepower is how FAST you hit the wall, torque is how HARD

Register or Log In To remove these advertisements.