Parting out 72 C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

soulman67 · 03-27-2005, 08:09 PM

I have a 72 that I am going to part out. Most of the front sheetmetal is dented beyond repair. The turck has a 4 speed and a 8 lug 10 bolt rear with 4.10 gear ratio. Just post what your looking for and I will post a pics and a price for it.

Striker169 · 03-27-2005, 09:40 PM

Cab Doors Seat Bed Brake Booster?

soulman67 · 03-27-2005, 10:31 PM

I will sale the whole truck for $500 or $350 without the vin & Title. The truck is beat up from being a ranch truck since it was new. Until 4 months ago when the engine was pulled.

chuck call · 03-28-2005, 11:30 AM

Is the rear end an eaton or dana. I am looking for an eaton 10 bolt 8 lug 4.10

jtminton · 03-28-2005, 01:00 PM

PM Sent

soulman67 · 03-28-2005, 01:11 PM

On the rear I am not sure, whats the difference? This is the first 10 bolt 3/4 ton axel I have delt with.

chuck call · 03-28-2005, 02:05 PM

I am pretty new with this to ,but they say you can remove the whole center section, it unbolts on the driveshaft side of the rearend

70c10 · 03-28-2005, 02:21 PM

Is the grille good?. If so how much shipped to 21236?. Same for the headlight bezels. Thanks

soulman67 · 03-28-2005, 04:14 PM

On the rearend just the cover unbolts.

soulman67 · 03-28-2005, 06:34 PM

The grill is good for a driver, its been repaired in one spot and has scuffs. The inner grill looks good with a few cracks. The complete grill with headlight buckets $175. plus shipping, I'll have to get a box and weight. If you want it I will pull it off and get a shipping qoute.

70c10 · 03-28-2005, 11:56 PM

Randy, I'm going to pass. Thanks

72 Cheyenne K20 · 03-29-2005, 12:20 AM

Any of the wiring harnesses. Need engine harness (V8). Cab harness (no A/C). Tail Light harness.

Scott

gregbr · 03-29-2005, 12:23 AM

How about the power brake setup (without master cylinder).

soulman67 · 03-29-2005, 12:43 AM

Scott I will sale the whole wiring harness for $100 dollars shipping is included for that price.

Greg on the power brake setup, do you just want the boster?

gregbr · 03-29-2005, 07:18 PM

I need the booster, any brackets, nuts/bolts, hose to engine, & rod to pedal. Would also be interested in the brake lines from the master cylinder if they disconnect on the frame below. Also need rear bumper brackets with nuts/bolts, and the throttle cable & pedal. Let me know.

Striker169 · 03-29-2005, 07:26 PM

Hows the cab? is it useable any dents major dammage? and how are the rockers and kick pannels? any pics of that?

soulman67 · 03-29-2005, 11:41 PM

Greg I don't have rear bumper brackets, Everything else I might can I'll let you know on a price after I get them off.

striker169, the cab has some damage right above the windsheild on the drivers side. The doors are in good shape the rockers are rusted and so is one cab corner. All the floor suports are there and look to be in good shape. I will post pics tomarow. I'll take $300 for the cab & doors with all the glass or $350 for it with vin & title.

03-27-2005, 08:09 PM	#1
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Parting out 72 C20 I have a 72 that I am going to part out. Most of the front sheetmetal is dented beyond repair. The turck has a 4 speed and a 8 lug 10 bolt rear with 4.10 gear ratio. Just post what your looking for and I will post a pics and a price for it. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-27-2005, 10:31 PM	#3
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	I will sale the whole truck for $500 or $350 without the vin & Title. The truck is beat up from being a ranch truck since it was new. Until 4 months ago when the engine was pulled. Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-28-2005, 01:00 PM	#5
jtminton II Timothy 4:2 Join Date: Mar 2005 Location: Fort Worth Posts: 361	PM Sent __________________ 72 C-20 2WD LWB Custom Camper Deluxe 350 4 Speed "Project Lazarus" MY TRUE PRIDE AND JOY "Dangit, Bobby, people will see that oil stain and think I'm a drunk."

03-28-2005, 01:11 PM	#6
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	On the rear I am not sure, whats the difference? This is the first 10 bolt 3/4 ton axel I have delt with. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-28-2005, 02:21 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Is the grille good?. If so how much shipped to 21236?. Same for the headlight bezels. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-27-2005, 09:40 PM	#2
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Cab Doors Seat Bed Brake Booster?

03-28-2005, 11:30 AM	#4
chuck call Registered User Join Date: Mar 2005 Location: Missouri Posts: 16	Is the rear end an eaton or dana. I am looking for an eaton 10 bolt 8 lug 4.10

03-28-2005, 02:05 PM	#7
chuck call Registered User Join Date: Mar 2005 Location: Missouri Posts: 16	I am pretty new with this to ,but they say you can remove the whole center section, it unbolts on the driveshaft side of the rearend

03-28-2005, 04:14 PM	#9
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	On the rearend just the cover unbolts. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-28-2005, 06:34 PM	#10
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	The grill is good for a driver, its been repaired in one spot and has scuffs. The inner grill looks good with a few cracks. The complete grill with headlight buckets $175. plus shipping, I'll have to get a box and weight. If you want it I will pull it off and get a shipping qoute. Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-28-2005, 11:56 PM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Randy, I'm going to pass. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-29-2005, 12:20 AM	#12
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Any of the wiring harnesses. Need engine harness (V8). Cab harness (no A/C). Tail Light harness. Scott

03-29-2005, 12:23 AM	#13
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	How about the power brake setup (without master cylinder). __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-29-2005, 12:43 AM	#14
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Scott I will sale the whole wiring harness for $100 dollars shipping is included for that price. Greg on the power brake setup, do you just want the boster? __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

03-29-2005, 07:18 PM	#15
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	I need the booster, any brackets, nuts/bolts, hose to engine, & rod to pedal. Would also be interested in the brake lines from the master cylinder if they disconnect on the frame below. Also need rear bumper brackets with nuts/bolts, and the throttle cable & pedal. Let me know. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

03-29-2005, 07:26 PM	#16
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Hows the cab? is it useable any dents major dammage? and how are the rockers and kick pannels? any pics of that?

03-29-2005, 11:41 PM	#17
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Greg I don't have rear bumper brackets, Everything else I might can I'll let you know on a price after I get them off. striker169, the cab has some damage right above the windsheild on the drivers side. The doors are in good shape the rockers are rusted and so is one cab corner. All the floor suports are there and look to be in good shape. I will post pics tomarow. I'll take $300 for the cab & doors with all the glass or $350 for it with vin & title. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

Register or Log In To remove these advertisements.