|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-30-2005, 06:22 PM
|
#1 |
|
outta the car velocityboy
Join Date: Nov 2004
Location: Scotland
Posts: 112
|
Alternator rebuild question
Hello again..
I have a question on GM alternators (internally regulated). On my truck I have what I believe is a 10SI setup, 3 wires... it is kinda small and has ribs around the outside edge at the rear.... On my 81 vette, I have a physically slightly physically larger and smoother alternator. What is this? Is it a 12SI? or just a newer 10SI? again a 3 wire set up... I want to rebuild both but am unsure about the designations... can anyone assist? especially confuzzled on the vette one.. is stock but don't know what it's called... don't want to pay shipping on something I won't use... Cheers Lee
__________________
  ..give it a turn here, take some wedge out there, we'll win some races... 
|
|
|
|
03-30-2005, 09:11 PM
|
#2 |
|
Not a bad nut after all..
Join Date: Dec 2000
Location: ND
Posts: 1,756
|
Not sure whether or not this helps:
http://www.madelectrical.com/electri...elcoremy.shtml TTT. I'm also intereted. |
|
|
|
|
03-31-2005, 12:03 AM
|
#3 |
|
resident geek
Join Date: Jan 2005
Location: Dusty West Texas
Posts: 77
|
I had thought I wanted to rebuild my 10si as well, it had a bad regulator that was draining the battery while the truck was off. I priced the regulator, it was $29... then I priced a 10si and it was $38. Needless to say, I just bought the rebuilt unit.
Just FYI
__________________
71 C-10 stepper 88 Moostang T-Top w/ lots of goodies |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
