>>>>>>>>>>>72mario<<<<<<<<<<<< - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevjayfsd · 07-26-2002, 04:41 PM

Thanks for the compliments.

The Truck sits with help from Western Chassis setup. 5.5/4 in. drop. I know it sounds like a lot, but it isn't. I have seen lower 4 in. front drops. It has 2.5" drop spindles with 3"Coils for the front. The rear sits with the help of 4" springs. The color is GM Torch Red(Brand new Corvette color.) I love it because it is the brightest red in the city. Done by DANS PAINT AND BODY.

I'm running a Vortec 350 that should make around 340 hp's. The rims are 15" progressive wheels.

72MARIO · 07-26-2002, 04:53 PM

Thanks for the info

Your truck looks amazing cant wait to see mine with the cab on the frame .I was looking at using vortec heads for my motor they are frigin pricy 640 canadian per side for the casting .

I have stop wasting so much time on here so I can get more done on my truck , although I have learned alot time to start work again.

07-26-2002, 04:41 PM	#1
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	>>>>>>>>>>>72mario<<<<<<<<<<<< Thanks for the compliments. The Truck sits with help from Western Chassis setup. 5.5/4 in. drop. I know it sounds like a lot, but it isn't. I have seen lower 4 in. front drops. It has 2.5" drop spindles with 3"Coils for the front. The rear sits with the help of 4" springs. The color is GM Torch Red(Brand new Corvette color.) I love it because it is the brightest red in the city. Done by DANS PAINT AND BODY. I'm running a Vortec 350 that should make around 340 hp's. The rims are 15" progressive wheels. Attached Images __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

07-26-2002, 04:53 PM	#2
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Thanks for the info Your truck looks amazing cant wait to see mine with the cab on the frame .I was looking at using vortec heads for my motor they are frigin pricy 640 canadian per side for the casting . I have stop wasting so much time on here so I can get more done on my truck , although I have learned alot time to start work again. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.