WTB:Inner barn door handle-B.D.Glass f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARIOS68PANEL · 03-27-2005, 04:11 PM

I need To buy the 68 panel Inner handle assymbly for my barn doors.
I will trade for barn door glass if someone needs it.

saxmo · 03-28-2005, 01:29 PM

I have a couple of barn doors from a 69 panel. They are beat up looking on the outside, but the latches and all work great.

MARIOS68PANEL · 03-28-2005, 09:17 PM

Let me know how much you want for the inside handel assymbly shipped to 95695 And I will pay with paypal. I just got new doors so I dont need the whole doors

saxmo · 03-28-2005, 09:23 PM

I'll take it out and figure shipping.

saxmo · 03-28-2005, 09:26 PM

I would be willing to work a trade if you have any patch panels I could use. I need the rocker that is from the door to the rear wheel on driver side. I also need the driver rear corner (taillight area). Let me know.

MARIOS68PANEL · 04-02-2005, 11:18 PM

ttt

03-27-2005, 04:11 PM	#1
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	WTB:Inner barn door handle-Barn Door Glass f/s I need To buy the 68 panel Inner handle assymbly for my barn doors. I will trade for barn door glass if someone needs it. __________________ 67 short step 71 Custom Last edited by MARIOS68PANEL; 03-27-2005 at 04:34 PM.

03-28-2005, 01:29 PM	#2
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I have a couple of barn doors from a 69 panel. They are beat up looking on the outside, but the latches and all work great. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-28-2005, 09:17 PM	#3
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	Let me know how much you want for the inside handel assymbly shipped to 95695 And I will pay with paypal. I just got new doors so I dont need the whole doors __________________ 67 short step 71 Custom

03-28-2005, 09:23 PM	#4
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I'll take it out and figure shipping. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

03-28-2005, 09:26 PM	#5
saxmo Senior Member Join Date: Nov 2004 Location: Cleveland, Texas Posts: 298	I would be willing to work a trade if you have any patch panels I could use. I need the rocker that is from the door to the rear wheel on driver side. I also need the driver rear corner (taillight area). Let me know. __________________ 2004 Corvette Coupe Black LS1 (daily driver) 1973 Ford Bronco (resto/mod @ 95%) 1991 GMC sportside Pickup Truck, 468c.i.d. ('nuff said) 1997 Ford F150 4.2L 500k+ miles (trash hauler) 2011 Nissan Juke (wife's daily driver) 1943 Ford GPW WWII jeep (waiting its' turn)

04-02-2005, 11:18 PM	#6
MARIOS68PANEL Active Member Join Date: Mar 2005 Location: North Highlands. California Posts: 449	ttt __________________ 67 short step 71 Custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.