New springs cheapest/easiest for drop? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Drogster · 03-14-2005, 02:36 AM

I want to do either a 2/3 or a 2/4 drop on my 68 C10. Are new springs the least-expensive and easiest way to accomplish this?

Thanks.

Tx Firefighter · 03-14-2005, 07:02 AM

Yes, springs are much cheaper than spindles. In the back, if you have coil springs, it's pretty much the only option to lower the back.

Drogster · 03-14-2005, 02:07 PM

Sweet. Thanks.

menlatin · 03-17-2005, 04:30 PM

i could not use an aftermarket front sway bar when i dropped my front 2", so watch out for that.

boraxman · 03-21-2005, 05:47 PM

How cheap you want? I'll sell my old front cut, rear heated springs, 2-4 drop for 45 to your door.
They are even, but definately used

Squid4life · 04-04-2005, 11:06 PM

Do you still have these???:

"I'll sell my old front cut, rear heated springs, 2-4 drop for 45 to your door."

Let me know,

Squid

boraxman · 04-05-2005, 09:02 AM

I still have them, but I would need to send them to a business address for that price. They are even. I would also say they are about a 3-5 drop and the ride w/ my new springs isnt much different.

03-14-2005, 02:36 AM	#1
Drogster Stroke it! Join Date: Feb 2005 Location: Juneau, Alaska Posts: 214	New springs cheapest/easiest for drop? I want to do either a 2/3 or a 2/4 drop on my 68 C10. Are new springs the least-expensive and easiest way to accomplish this? Thanks. __________________ Drog Nitrous is for those who don't know how to build.

03-14-2005, 07:02 AM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Yes, springs are much cheaper than spindles. In the back, if you have coil springs, it's pretty much the only option to lower the back. __________________ I'm on the Instagram- @Gearhead_Kevin

03-14-2005, 02:07 PM	#3
Drogster Stroke it! Join Date: Feb 2005 Location: Juneau, Alaska Posts: 214	Sweet. Thanks. __________________ Drog Nitrous is for those who don't know how to build.

03-17-2005, 04:30 PM	#4
menlatin Registered User Join Date: Feb 2003 Location: Denton, TX Posts: 281	i could not use an aftermarket front sway bar when i dropped my front 2", so watch out for that. __________________ 72 lwb. living room built 355. Best 1/8mi, 8.85 @ 79. WOOHOO, i didnt break anything!!

03-21-2005, 05:47 PM	#5
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	How cheap you want? I'll sell my old front cut, rear heated springs, 2-4 drop for 45 to your door. They are even, but definately used __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

04-04-2005, 11:06 PM	#6
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	Do you still have these???: "I'll sell my old front cut, rear heated springs, 2-4 drop for 45 to your door." Let me know, Squid __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.

04-05-2005, 09:02 AM	#7
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	I still have them, but I would need to send them to a business address for that price. They are even. I would also say they are about a 3-5 drop and the ride w/ my new springs isnt much different. Attached Images __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351 Last edited by boraxman; 04-05-2005 at 10:13 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.