Looking for frame section (see pic) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XXL · 02-16-2005, 03:39 PM

I'm looking for the frame section indicated in the attached pic. Just needs to be the stock C-10 frame piece (no notching like in the pic) and I need both sides. Has anyone got a spare junker (wrecked, LWB, whatever) that has these pieces in good shape? If you can accommodate, please PM me with asking price and shipping to 67230. No tire-kicking here. If it's what I need and at the right price, I'm a buyer.

BTW... a little longer on each end wouldn't hurt

Kenneth

edit to update pic... this is the piece I need-- if you measure from the center of the big xmember 8" forward and 20" back, same for both sides.

69ChevySWB · 02-16-2005, 03:51 PM

I have a frame for $25 but I do not have a way to cut the piece out for you.

Joe67 · 02-16-2005, 03:58 PM

You'll see a few 'I just scrapped one...' replies to this one. I know I cut up and scrapped my bent 67 frame last fall...

69Chevy - take your sawzall out there and chop off the section

XXL · 02-16-2005, 05:12 PM

Quote:

Originally Posted by 67c10step

You'll see a few 'I just scrapped one...' replies to this one. I know I cut up and scrapped my bent 67 frame last fall...

Say it ain't so!

Quote:

Originally Posted by 69ChevySWB

I have a frame for $25 but I do not have a way to cut the piece out for you.

Torch? Sawzall? Really sharp nail file? If you come up with a way to chop it up, let me know. That sounds just like what I'm looking for. BTW, I only need the 2 rail pieces... NOT the crossmember that ties them together, so something to grind off the rivets that hold them all together would be good).

**1970 CST Short Wide** · 02-16-2005, 06:14 PM

Is it the same on a leaf spring frame. If so I can cut and send for shipping. I'll get a pic tonight and we can compair.

*bisquik65* · 02-16-2005, 06:26 PM

If that dont work i may have one here,if the frame is damaged i will cut it,I may sell the 68 lwb frame coil spring...

XXL · 02-16-2005, 10:26 PM

Quote:

Originally Posted by 1970 CST Short Wide

Is it the same on a leaf spring frame. If so I can cut and send for shipping. I'll get a pic tonight and we can compair.

I'd appreciate it very much. I _think_ they're the same frame rails but don't know for certain. A pic will probably clear that up completely as it will either look just like it or completely different... probably not just a "too close to tell."

dropdprpls10 · 02-16-2005, 10:35 PM

ill ask my buddy if he kept his scrap.. he just did a huge notch and i know he took more then you need out..

Joe67 · 02-16-2005, 11:06 PM

Quote:

Originally Posted by XXL

Say it ain't so!

Yep, I'd post a pic but it would make you cry

**hilljob26** · 02-16-2005, 11:18 PM

i have one that i am getting ready to scrap,hows 40 to your door sound...mike

FRENCHBLUE72 · 02-16-2005, 11:31 PM

I am getting ready to cut up a frame (coil spring) you can have it for shipping

**1970 CST Short Wide** · 02-17-2005, 12:01 PM

Sorry I didnt get the pic last night I got hung up. I'll get it tonight if you still want. Sounds like you have lots of good offers here

**1970 CST Short Wide** · 02-17-2005, 09:22 PM

How much do you need

XXL · 02-19-2005, 08:00 PM

I'm waiting to hear back from FRENCHBLUE72 who says he's got one on the chopping block. If that deal doesn't work out, I'll give you others who've offered a buzz.

FRENCHBLUE72 · 02-19-2005, 10:17 PM

Ken I chopped that frame today. How much room did you give me to play with cause I got from the crked crass member all the way up to the bed mount you can see in the pic. Would you like it trimed back to your spec's? I am gonna knock out the crossmember's and try to get it boxed up and get a shipping quoate on monday...

XXL · 02-20-2005, 10:53 AM

Quote:

Originally Posted by FRENCHBLUE72

Ken I chopped that frame today. How much room did you give me to play with cause I got from the crked crass member all the way up to the bed mount you can see in the pic. Would you like it trimed back to your spec's? I am gonna knock out the crossmember's and try to get it boxed up and get a shipping quoate on monday...

That'll work great! I can trim on this end once I get them mocked up and verify exact cut points.

Thanks again!!!

XXL · 02-26-2005, 03:29 PM

Thanks for all the offers. I think FRENCHBLUE72's got me fixed up.

FRENCHBLUE72 · 02-26-2005, 08:56 PM

Here ya go ken do you want the 2 crossmember's along with the rail's? Shold be pretty easy to ship like this..

Joe67 · 02-26-2005, 09:01 PM

This board rocks

XXL · 02-26-2005, 10:53 PM

Quote:

Originally Posted by FRENCHBLUE72

Here ya go ken do you want the 2 crossmember's along with the rail's? Shold be pretty easy to ship like this..

The 3 pieces on the left are perfect. I don't need the one on the right.

You are THE MAN!

XXL · 03-31-2005, 09:51 PM

The eagle has landed. Thanks very much to FRENCHBLUE72 for the donor pieces and the effort of hacking them out of the frame, boxing them, and shipping them to me. Gracias!

FRENCHBLUE72 · 04-01-2005, 12:09 AM

No problem glad they showed up.

cadiac · 04-03-2005, 01:18 PM

I have a 71 3/4 coil spring frame here in Wichita thats about to get cut or? Are the frame rails the same as a 1/2 ton?

XXL · 04-05-2005, 10:10 PM

Quote:

Originally Posted by cadiac

I have a 71 3/4 coil spring frame here in Wichita thats about to get cut or? Are the frame rails the same as a 1/2 ton?

Back in February, they'd have been PERFECT. But FRENCHBLUE72 got me fixed up. Thanks for the offer.

02-16-2005, 03:39 PM	#1
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Looking for frame section (see pic) I'm looking for the frame section indicated in the attached pic. Just needs to be the stock C-10 frame piece (no notching like in the pic) and I need both sides. Has anyone got a spare junker (wrecked, LWB, whatever) that has these pieces in good shape? If you can accommodate, please PM me with asking price and shipping to 67230. No tire-kicking here. If it's what I need and at the right price, I'm a buyer. BTW... a little longer on each end wouldn't hurt Kenneth edit to update pic... this is the piece I need-- if you measure from the center of the big xmember 8" forward and 20" back, same for both sides. Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter Last edited by XXL; 02-19-2005 at 08:07 PM.

02-16-2005, 03:51 PM	#2
69ChevySWB Registered User Join Date: Apr 2002 Location: Little Elm, Texas, USA Posts: 237	I have a frame for $25 but I do not have a way to cut the piece out for you. __________________ Brian Thompson 99 2500 Silverado 6.0 05 Suburban (Wife's) 67 Mustang (Wife's)

02-16-2005, 03:58 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	You'll see a few 'I just scrapped one...' replies to this one. I know I cut up and scrapped my bent 67 frame last fall... 69Chevy - take your sawzall out there and chop off the section __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-16-2005, 06:14 PM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Is it the same on a leaf spring frame. If so I can cut and send for shipping. I'll get a pic tonight and we can compair. __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

02-16-2005, 10:35 PM	#8
dropdprpls10 Registered User Join Date: Jun 2004 Location: Reading PA Posts: 164	ill ask my buddy if he kept his scrap.. he just did a huge notch and i know he took more then you need out.. __________________ 98% of ALL fords are still on the road today... .... the other 2% made it home!!! where is the best place to park a ford???.. next to a fire station!!!! pictures of my new and old trucks!

02-16-2005, 06:26 PM	#6
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	If that dont work i may have one here,if the frame is damaged i will cut it,I may sell the 68 lwb frame coil spring...

02-16-2005, 11:18 PM	#10
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i have one that i am getting ready to scrap,hows 40 to your door sound...mike __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

02-16-2005, 11:31 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I am getting ready to cut up a frame (coil spring) you can have it for shipping __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-17-2005, 12:01 PM	#12
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	Sorry I didnt get the pic last night I got hung up. I'll get it tonight if you still want. Sounds like you have lots of good offers here __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

02-17-2005, 09:22 PM	#13
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	here you go How much do you need Attached Images __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 Last edited by 1970 CST Short Wide; 02-17-2005 at 09:25 PM.

02-19-2005, 08:00 PM	#14
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	I'm waiting to hear back from FRENCHBLUE72 who says he's got one on the chopping block. If that deal doesn't work out, I'll give you others who've offered a buzz. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

02-19-2005, 10:17 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Ken I chopped that frame today. How much room did you give me to play with cause I got from the crked crass member all the way up to the bed mount you can see in the pic. Would you like it trimed back to your spec's? I am gonna knock out the crossmember's and try to get it boxed up and get a shipping quoate on monday... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-26-2005, 03:29 PM	#17
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Thanks for all the offers. I think FRENCHBLUE72's got me fixed up. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

02-26-2005, 08:56 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Here ya go ken do you want the 2 crossmember's along with the rail's? Shold be pretty easy to ship like this.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-26-2005, 09:01 PM	#19
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	This board rocks __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

03-31-2005, 09:51 PM	#21
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	The eagle has landed. Thanks very much to FRENCHBLUE72 for the donor pieces and the effort of hacking them out of the frame, boxing them, and shipping them to me. Gracias! __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

04-01-2005, 12:09 AM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	No problem glad they showed up. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-03-2005, 01:18 PM	#23
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	I have a 71 3/4 coil spring frame here in Wichita thats about to get cut or? Are the frame rails the same as a 1/2 ton?

Register or Log In To remove these advertisements.