Complete 67-70 cruise control - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BLAZERMAN · 04-06-2005, 05:37 AM

Factory cruise for 67 to 70, everythings here except the brake light switch and it can still be bought new [about 15 bucks]. The broken cruise lever in pic is not included but has an NOS lever to go with it.
250.00 plus shipping

byrd · 04-06-2005, 07:16 AM

any trades?

Brewski* · 04-06-2005, 09:46 AM

PM sent

**special-K** · 04-06-2005, 09:51 AM

So,is tilt different?Or doesn`t it matter?

fern · 04-06-2005, 01:06 PM

PM Sent, Fern..

stelth2002 · 04-06-2005, 01:27 PM

Does it still work? and is this the same thing that they used on the inline?

BLAZERMAN · 04-06-2005, 01:40 PM

Cruise is SOLD to Brewski*

stelth2002 · 04-06-2005, 02:10 PM

My question still stands was cruise available on an inline and is the style the same or different?

Thanks

HuggerCST · 04-06-2005, 05:12 PM

Rod can probably answer your questions better than me, but I see no reason why it wouldn't work with a six, because the 68-70 cruise hooks to the throttle arm instead of the carb. Here is a pic of the clip attached to the arm just below the throttle rod that goes to the carb. I'm not sure if cruise ever came from the factory with a six cylinder though. There is no difference in tilt/non tilt setups that I know of.

BLAZERMAN · 04-06-2005, 05:17 PM

I dont know if the six ever had one but I'm sure it could be made to work, you would have to fabricate a bracket to hold the vac pod is about all.

HuggerCST · 04-06-2005, 05:21 PM

I believe the vacuum pod bolts to the firewall.

BLAZERMAN · 04-06-2005, 05:27 PM

I was thinking it bolted to the motor but I think your right.

stelth2002 · 04-06-2005, 05:30 PM

just trying to get things straight. HuggerCST says 68-70 bolts to trottle, but Blazerman says this is for a 67-70. Whos right and what is different about the 67?
Thank you for the help

HuggerCST · 04-06-2005, 09:39 PM

Where are you Rod? LOL The reason I said 68-70 is because I'm thinking that cruise didn't come out until '68, but I could be wrong. From what I understand, Blazerman's cruise setup is the early style. There is not much difference in the early and late style,(pre '71), but the early style had 2 vacuum lines on the pod, and the servo is different in that the speedometer cables are 90 degrees from each other. I have both styles, and those are the only differences that I see. I would post more pics but they are on my computer at work. A while back Rod filled us in on cruise setups. I'll do a search and try to find it for you.

HuggerCST · 04-06-2005, 09:45 PM

Here it is. Alot of info here. http://67-72chevytrucks.com/vboard/s...cruise+control

04-06-2005, 05:37 AM	#1
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Complete 67-70 cruise control Factory cruise for 67 to 70, everythings here except the brake light switch and it can still be bought new [about 15 bucks]. The broken cruise lever in pic is not included but has an NOS lever to go with it. 250.00 plus shipping __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-06-2005, 09:51 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	So,is tilt different?Or doesn`t it matter? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2005, 01:27 PM	#6
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	Does it still work? and is this the same thing that they used on the inline? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-06-2005, 01:40 PM	#7
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Cruise is SOLD to Brewski* __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-06-2005, 02:10 PM	#8
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	My question still stands was cruise available on an inline and is the style the same or different? Thanks __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-06-2005, 09:46 AM	#3
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	PM sent

04-06-2005, 01:06 PM	#5
fern Registered User Join Date: Mar 2005 Location: Kansas City, MO Posts: 33	PM Sent, Fern..

04-06-2005, 05:12 PM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Rod can probably answer your questions better than me, but I see no reason why it wouldn't work with a six, because the 68-70 cruise hooks to the throttle arm instead of the carb. Here is a pic of the clip attached to the arm just below the throttle rod that goes to the carb. I'm not sure if cruise ever came from the factory with a six cylinder though. There is no difference in tilt/non tilt setups that I know of. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-06-2005, 05:17 PM	#10
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	I dont know if the six ever had one but I'm sure it could be made to work, you would have to fabricate a bracket to hold the vac pod is about all. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-06-2005, 05:21 PM	#11
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I believe the vacuum pod bolts to the firewall. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-06-2005, 05:27 PM	#12
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	I was thinking it bolted to the motor but I think your right. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-06-2005, 05:30 PM	#13
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	just trying to get things straight. HuggerCST says 68-70 bolts to trottle, but Blazerman says this is for a 67-70. Whos right and what is different about the 67? Thank you for the help __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

04-06-2005, 09:39 PM	#14
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Where are you Rod? LOL The reason I said 68-70 is because I'm thinking that cruise didn't come out until '68, but I could be wrong. From what I understand, Blazerman's cruise setup is the early style. There is not much difference in the early and late style,(pre '71), but the early style had 2 vacuum lines on the pod, and the servo is different in that the speedometer cables are 90 degrees from each other. I have both styles, and those are the only differences that I see. I would post more pics but they are on my computer at work. A while back Rod filled us in on cruise setups. I'll do a search and try to find it for you. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-06-2005, 09:45 PM	#15
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Here it is. Alot of info here. http://67-72chevytrucks.com/vboard/s...cruise+control __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.