everything left over i have to sale/ wanted too - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OneBad4x4 · 01-26-2005, 02:41 AM

73-87 windshield $50
82 one ton nice chrome bumper $50
73-87 4 inch front leaf springs with poly bushings $100
4 inch tapered blocks $30
4 inch tapered blocks $40 (new)
4 inch lift u bolts and top plates for 12 bolt $50 (new)
73-87 stock front and rear leaf springs $40
bolt on front shackle mounts $40
3 inch non tapered blocks $20
dana 44/12 bolt from 70k5 complete $150
12 bolt from 73-87 not sure on year $75
one ton rear leaf springs from 82 4x4 $40
stock gas tank from 70 GMC behind seat $35
back rear spring mounts and stock shackles $20 a pair
narrowed chrome elcamino rear bumper with lights made for 73-87 $40
82 front slope nose clip, complete, one dent $40
82 stock steering column, non tilt, no key $25
71 or so chevy front clip, almost complete $100

all prices OBO, make offer, ill probably take it. and trades preffered.

this is what i do need...

drivelines for 70 k5 with big block, 465, and 205 and a 4 inch lift with dana 60 and 14 bolt FF

stainless steel braided brakelines for 70 k5 with an 1982 chevy dana 60 front axle and 14 bolt ff rear axle and 4-6 inch lift

u bolts/ nuts/ top plates for 14 bff

2 or so inch longer than stock u bolts/ bolts for front dana 60

4 shocks for 4-6 inch lift, dana 60 axle and 14 bolt rear end

67-72 front clip, preferably GMC

4 core radiator

600-750 edelbrock carbureator

alpha_male0203 · 01-26-2005, 10:21 AM

i have an eldelbrock carb for sale 225 OBO I dont need anything that you said above. alpha_male0203@yahoo.com If you have any questions or just send a message on the board.

OneBad4x4 · 01-27-2005, 08:49 PM

come awn, some one buy this stuff! i want my truck done.

Paso76GMCstepper · 01-28-2005, 04:33 AM

Are the leaf springs new? Will the bumper fit my 76

Im in Paso Robles. I was in Bakersfield today! Do u know where I could get a new passenger side door

OneBad4x4 · 01-28-2005, 12:51 PM

none of the leaf springs are new.

the bumper should fit your truck, not sure. i dont have a new passenger door, but i have a good DD one

benoit454 · 01-28-2005, 06:28 PM

You say you got a front shackle or hanger for the rear end?

I got an 86 k10 swb that needs the front spring hanger on the drivers side.

OneBad4x4 · 01-29-2005, 11:39 AM

ok

front the front differential or the rear differential?

front or back on which one? i know, its confusing for me to read.

Nick's683/4 · 01-29-2005, 05:18 PM

Can you get a pic of the 71 front clip?

OneBad4x4 · 01-29-2005, 08:34 PM

sure thing, as soon as it stops raining

Nick's683/4 · 01-30-2005, 12:57 AM

It was nice and sunny all day up here.

OneBad4x4 · 02-01-2005, 11:39 PM

ok, i got the pic

but my server for my site is screwed up, ill just email it to you

Old Chevy Lover · 02-02-2005, 09:39 AM

sent you a PM

Nick's683/4 · 02-02-2005, 06:40 PM

my email is userbob2283@aol.com

Thanks Nick

OneBad4x4 · 04-03-2005, 04:12 PM

did you get them Nick?

OneBad4x4 · 04-07-2005, 10:34 PM

up

skahide · 04-07-2005, 11:16 PM

i need a windsheild but im in texas and that would be a pain to get

OneBad4x4 · 04-08-2005, 12:10 AM

probably

01-26-2005, 02:41 AM	#1
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	everything left over i have to sale/ wanted too 73-87 windshield $50 82 one ton nice chrome bumper $50 73-87 4 inch front leaf springs with poly bushings $100 4 inch tapered blocks $30 4 inch tapered blocks $40 (new) 4 inch lift u bolts and top plates for 12 bolt $50 (new) 73-87 stock front and rear leaf springs $40 bolt on front shackle mounts $40 3 inch non tapered blocks $20 dana 44/12 bolt from 70k5 complete $150 12 bolt from 73-87 not sure on year $75 one ton rear leaf springs from 82 4x4 $40 stock gas tank from 70 GMC behind seat $35 back rear spring mounts and stock shackles $20 a pair narrowed chrome elcamino rear bumper with lights made for 73-87 $40 82 front slope nose clip, complete, one dent $40 82 stock steering column, non tilt, no key $25 71 or so chevy front clip, almost complete $100 all prices OBO, make offer, ill probably take it. and trades preffered. this is what i do need... drivelines for 70 k5 with big block, 465, and 205 and a 4 inch lift with dana 60 and 14 bolt FF stainless steel braided brakelines for 70 k5 with an 1982 chevy dana 60 front axle and 14 bolt ff rear axle and 4-6 inch lift u bolts/ nuts/ top plates for 14 bff 2 or so inch longer than stock u bolts/ bolts for front dana 60 4 shocks for 4-6 inch lift, dana 60 axle and 14 bolt rear end 67-72 front clip, preferably GMC 4 core radiator 600-750 edelbrock carbureator __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-26-2005, 10:21 AM	#2
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	i have an eldelbrock carb for sale 225 OBO I dont need anything that you said above. alpha_male0203@yahoo.com If you have any questions or just send a message on the board. __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

01-27-2005, 08:49 PM	#3
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	come awn, some one buy this stuff! i want my truck done. __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-28-2005, 04:33 AM	#4
Paso76GMCstepper Registered User Join Date: Jan 2004 Location: Paso Robles, CA Posts: 347	Are the leaf springs new? Will the bumper fit my 76 Im in Paso Robles. I was in Bakersfield today! Do u know where I could get a new passenger side door __________________ Tony "Life is a Team Sport" To the memory of the Hendrick Motorsports Plane Crash Victims

01-28-2005, 12:51 PM	#5
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	none of the leaf springs are new. the bumper should fit your truck, not sure. i dont have a new passenger door, but i have a good DD one __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-28-2005, 06:28 PM	#6
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	You say you got a front shackle or hanger for the rear end? I got an 86 k10 swb that needs the front spring hanger on the drivers side.

01-29-2005, 11:39 AM	#7
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	ok front the front differential or the rear differential? front or back on which one? i know, its confusing for me to read. __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-29-2005, 05:18 PM	#8
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	Can you get a pic of the 71 front clip? __________________ 70 1 ton with a 454 and a 4 speed and a np205

01-29-2005, 08:34 PM	#9
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	sure thing, as soon as it stops raining __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

01-30-2005, 12:57 AM	#10
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	It was nice and sunny all day up here. __________________ 70 1 ton with a 454 and a 4 speed and a np205

02-01-2005, 11:39 PM	#11
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	ok, i got the pic but my server for my site is screwed up, ill just email it to you __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

02-02-2005, 09:39 AM	#12
Old Chevy Lover Registered User Join Date: Dec 2002 Location: Chillicothe OHIO Posts: 717	sent you a PM __________________ Keith 70 Chevelle Malibu SS Clone 468/Auto 72 C10 SWB 350/Auto 13 Camaro SS/RS 6.2/Auto

02-02-2005, 06:40 PM	#13
Nick's683/4 Registered User Join Date: Apr 2004 Location: Oakley CA Posts: 165	my email is userbob2283@aol.com Thanks Nick __________________ 70 1 ton with a 454 and a 4 speed and a np205

04-03-2005, 04:12 PM	#14
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	did you get them Nick? __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

04-07-2005, 10:34 PM	#15
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	up __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.



Register or Log In To remove these advertisements.

04-07-2005, 11:16 PM	#16
skahide Looking @ 67 Chevy Short Step Join Date: Jul 2004 Location: Near Tyler, Texas Posts: 136	i need a windsheild but im in texas and that would be a pain to get

04-08-2005, 12:10 AM	#17
OneBad4x4 Lifted70BowTie Join Date: Jul 2004 Location: Bakersfield, CA Posts: 204	probably __________________ I live in Bakersfield, CA 93308, I use USPS for shipping. (Even tho I've never shipped anything and am currently banned for failure to send out parts.) Please reply to my for sale threads by PMing me. Its hard to keep track of all the threads.

Register or Log In To remove these advertisements.