Interest in 72 Suburban????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob Moore · 04-09-2005, 12:27 AM

Local yard has 72 Suburban to part. Front brakes gone, front fenders gone, windshield gone. All 3 doors available with door panels, glass, regulators etc.
Hood available, rear hatch and gate available, steering column avail., side glass avail., 2nd and 3rd seats with brackets available. I am assuming the interior rear panels are available. Dash pad is gone. Don't know the grill condition or core support. Motor is small block - short block only left.

This posting to judge interest in doors/seats/hatch & gate.

Give me an idea of price and desirability.

Thanks - Bob

cornutz · 04-09-2005, 11:44 AM

I am guessing that the column is not a tilt, right? If it is, I would be interested....

NutZ

RED72blazer · 04-09-2005, 05:30 PM

i need that hood and the front doors.

Bob Moore · 04-09-2005, 08:45 PM

Cornutz - Column is non-tilt. Sorry. Did you get ahold of Mike at Grumpy's Place?

Red - I will pull the doors if still there on Sunday. Also the hood if you want it. I have other hoods if it is not good. PM me with your phone # and I will call tomorrow morning shortly after they open - 9AM. The front doors looked good with glass. The door handle on the driver door is gone and the door remote spring is broken. The glass regulator splines are shot - handle will not work. Passenger door was jammed shut - would not open - but we did not try very hard. Passenger outside handle might also be missing. I left the wrecking yard at noon and those parts were still there. The driver fender was gone and the passenger side fender was smacked - maybe why the door did not open. Both doors had speaker holes cut out - very poor job - but could work around it. Price will be in the $150.00 range each. Give me an idea if you are interested. Will be out for dinner tonight but will check back tonight.

neonlarry · 04-09-2005, 08:51 PM

I'm not interested, but the 2nd & 3rd seat brackets are hard to come by. I've seen them go for up to $75. Also the rear panels, if in good shape can fetch top dollar.

Bob Moore · 04-09-2005, 09:15 PM

Neonlarry - Thank you for the info. Do you mean the legs,etc. or the holddowns? The legs were there but no hold downs. The side panels behind the doors - like over the wheelwells were MIA.

RED72blazer · 04-09-2005, 09:27 PM

I will have to pass, I'm looking for something really clean without rust or speaker holes. I don't even need glass, just clean shells to cut down for my blazer.

thanks
red72

04-09-2005, 12:27 AM	#1
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Interest in 72 Suburban????? Local yard has 72 Suburban to part. Front brakes gone, front fenders gone, windshield gone. All 3 doors available with door panels, glass, regulators etc. Hood available, rear hatch and gate available, steering column avail., side glass avail., 2nd and 3rd seats with brackets available. I am assuming the interior rear panels are available. Dash pad is gone. Don't know the grill condition or core support. Motor is small block - short block only left. This posting to judge interest in doors/seats/hatch & gate. Give me an idea of price and desirability. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 05:30 PM	#3
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	i need that hood and the front doors. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

04-09-2005, 08:45 PM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Parts Cornutz - Column is non-tilt. Sorry. Did you get ahold of Mike at Grumpy's Place? Red - I will pull the doors if still there on Sunday. Also the hood if you want it. I have other hoods if it is not good. PM me with your phone # and I will call tomorrow morning shortly after they open - 9AM. The front doors looked good with glass. The door handle on the driver door is gone and the door remote spring is broken. The glass regulator splines are shot - handle will not work. Passenger door was jammed shut - would not open - but we did not try very hard. Passenger outside handle might also be missing. I left the wrecking yard at noon and those parts were still there. The driver fender was gone and the passenger side fender was smacked - maybe why the door did not open. Both doors had speaker holes cut out - very poor job - but could work around it. Price will be in the $150.00 range each. Give me an idea if you are interested. Will be out for dinner tonight but will check back tonight. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 08:51 PM	#5
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	I'm not interested, but the 2nd & 3rd seat brackets are hard to come by. I've seen them go for up to $75. Also the rear panels, if in good shape can fetch top dollar. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

04-09-2005, 09:15 PM	#6
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Neonlarry - Thank you for the info. Do you mean the legs,etc. or the holddowns? The legs were there but no hold downs. The side panels behind the doors - like over the wheelwells were MIA. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

04-09-2005, 11:44 AM	#2
cornutz All Praise RANDY!! Join Date: Sep 2004 Location: Central California Posts: 391	I am guessing that the column is not a tilt, right? If it is, I would be interested.... NutZ

04-09-2005, 09:27 PM	#7
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	I will have to pass, I'm looking for something really clean without rust or speaker holes. I don't even need glass, just clean shells to cut down for my blazer. thanks red72 __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.