fold over bench seat 68 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldwagon** · 03-30-2005, 02:55 AM

I normally run on the 73-87 board as that's what I'm working on, but I have a stock seat out of a 68 GMC that I owned many years ago. It is a fold over bench. Will need to be recovered, but has been in storage for quite some time. Anybody interested just PM me.

Striker169 · 03-30-2005, 10:40 AM

Ygpm

RicksTrucks · 03-30-2005, 11:29 AM

Are the springs and foam in good shape?

**oldwagon** · 04-05-2005, 10:48 AM

After looking this seat over real good this weekend, it looks like all that is of any use to anybody would be just the frame, springs, and runners. The shed that it was in had offered some protection from direct moisture, but it has been in there for about 15 yrs. It could probably break down for shipping but that as could take awhile it is stored about 30 mile from where I live. Also would just have to check and get some quotes, unless some one wants to come pick up just as is. It is located in Wellington, Ks., but I live in Derby, Ks. Asking $20 plus shipping or any other arrangements that can be made for any one still interesed.

RicksTrucks · 04-05-2005, 11:03 AM

Can you tell if any of the springs are broken or rusted to the point where they will break?

**oldwagon** · 04-11-2005, 01:26 PM

No broken springs or any indication thereof. Just your basic rust from being stored.

03-30-2005, 02:55 AM	#1
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	fold over bench seat 68 GMC I normally run on the 73-87 board as that's what I'm working on, but I have a stock seat out of a 68 GMC that I owned many years ago. It is a fold over bench. Will need to be recovered, but has been in storage for quite some time. Anybody interested just PM me.

03-30-2005, 11:29 AM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Are the springs and foam in good shape? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-05-2005, 10:48 AM	#4
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	bench seat After looking this seat over real good this weekend, it looks like all that is of any use to anybody would be just the frame, springs, and runners. The shed that it was in had offered some protection from direct moisture, but it has been in there for about 15 yrs. It could probably break down for shipping but that as could take awhile it is stored about 30 mile from where I live. Also would just have to check and get some quotes, unless some one wants to come pick up just as is. It is located in Wellington, Ks., but I live in Derby, Ks. Asking $20 plus shipping or any other arrangements that can be made for any one still interesed.

04-05-2005, 11:03 AM	#5
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Can you tell if any of the springs are broken or rusted to the point where they will break? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

04-11-2005, 01:26 PM	#6
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	68 bench seat No broken springs or any indication thereof. Just your basic rust from being stored.

03-30-2005, 10:40 AM	#2
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Ygpm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.