The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-12-2005, 03:23 AM   #1
Laoich
Registered User
 
Join Date: Jan 2005
Location: Central Virginia
Posts: 22
Annoying sound?

When driving with my windows down, before the wind noise takes over at about 30, there is a clicking noise in what seems to be the left front tire. It could be in the right, but being the driver I hear out my left window stronger I s'pose. But, the problem is I can't find any thing that is causing the sound. It's a cross between a small rock or marble bouncing around in the hub cap and when you put a card in your bike spokes, which on a Suburban would be hilarious. I have taken the wheels off and checked the brake rotors and calipers. They seem smooth and nothing makes that sound when I turn them. By the way, it's 2wd so no U-joints up there. But maybe the drive shaft because it is in sync with the wheel speed. Though the drive shaft seems smooth with nothing hitting it, the rubber around the center is almost shot. Any ideas? I've driven it with and without the hub caps, and got the same noise.

Thanks,

Sterling


It's just hard to look cool and click lol
__________________
87' GMC R2500 Sierra Classic Suburban - 454

Last edited by Laoich; 04-12-2005 at 03:25 AM.
Laoich is offline   Reply With Quote
Old 04-12-2005, 05:05 PM   #2
89blacksub
army slave
 
Join Date: Feb 2005
Location: FT Hood, Texas
Posts: 89
i had a little bit of wierd noise when i had my driver side window down all the way and freaked for a little bit. then realized that if i put my window up about 2 inches it went away. probably not the same thing...but you never know.
__________________
1989 suburban 1500 4X4 silverado
all stock...for now.

plans;
6 inch susp lift
36" tires on 15" rims
new all black paint
custom bumbers
misc engine mods until it goes, then drop in 454
nerf step bars
billet grill
...
89blacksub is offline   Reply With Quote
Old 04-12-2005, 09:19 PM   #3
screwballl
Tonawanda 454
 
screwballl's Avatar
 
Join Date: Mar 2004
Location: Liquid Sunshine State
Posts: 2,754
one possiblity is that like with my 76 C1500, i get a slight rattle/click that sounds liek its coming from the wheel but i found out is actually a piece of metal somewhere IN my door rattling towards the bottom...i think the alignment or something is off just enough to not feel a vibration but to cause the rattle/click... any rocks or nails or tacks in the tire?
also one possiblity may be a bearing problem... not sure what else, I haven't troubleshooted this problem except the click from my 76.

I wouldn't say it is the drive shaft since it would go slower/faster when it shifts gears...
__________________
91 Chevy Suburban Tonawanda 454 R2500 - SOLD!!!
04 Dodge Durango 5.7L Hemi 2WD, 24K miles (as of July 2011)
In the past 30 years about 90% of Fords are still on the road, the other 10% made it home.
-------------------
screwballl is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com