Wanted: Bed Floor Patch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jesse72 · 04-11-2005, 04:02 PM

I am in need of a good piece of steel bed floor from a 67-72, im not looking for a reproduction I already have one and its junk! Let me know what you have. Surface rust is fine but no holes.
Thanks,Jesse

Burnsman · 04-11-2005, 04:24 PM

Where in ohio? I have a complete bed floor for an 8' bed. Let me know if you're interested. Brian

Jesse72 · 04-11-2005, 09:51 PM

About 20 miles west of cleveland, what kind of price you talking? what shape do you have good bed sides also. Please send me some pics crazyracer31r@aol.com

Burnsman · 04-11-2005, 09:58 PM

You're about 2 hours from me. I want $100 for the whole bed. Floor is good. Pass bedside is junk. Driver side has a pullable dent, but it is big. front panel is good. No gate. was a Texas bed a while back. I'll shoot you some pics from work tomorrow morning. Brian

Burnsman · 04-12-2005, 08:31 AM

Here are pics of the bed. Bed is $100. For $150, you can have the whole bed and the rear frame part (it was a trailer). The trailing arms are good. It has a 5 lug rear. Tailgate is gone. Let me know if you're interested. Thanks. Brian

Jesse72 · 04-12-2005, 02:58 PM

can it be pulled as a trailer right now?? how are the inner fender wheels

Burnsman · 04-12-2005, 03:48 PM

Sort of. The guy I bought it from wanted the tongue part back (I've had it for a while and I keep forgetting to send it back, plus, it's so much easier to move around). There are no lights hooked up. I guess I could ask him if you took and returned it if it would be ok. One of the fender wells looked like it had a couple of pin sized holes. The other one looked good. If you are serious about it, I can sweep out the back and take a better look around the edges. Brian

GMC Jim · 04-13-2005, 05:54 AM

if you decide that you would part out the bed; what would be my cost for the front panel shippped to Portland OR, 97233 ?? ( maybe the freight might be so high as to not be worth it !! )

grayw0lf · 04-13-2005, 10:00 AM

I must fully agree on the bed patch panels being junk. They are not only much thinner than original, but the ribs are a different width. Try making that match up perfect.

I'm having to use some creative welding to patch the front 2' of my bed floor.

wannabeburbowner · 04-13-2005, 06:52 PM

I may also be interested in the bed if Jesse passes, I just want the floor though...

Let me know.

Thanks,

Travis

Jesse72 · 04-14-2005, 02:32 PM

i will pass if you are intrested i dont have the time right now to pick it up

Burnsman · 04-14-2005, 02:48 PM

Anyone else interested in the whole bed? I don't have time to tear it apart right now. I do have a local guy that is "kinda" interested, but I know how that goes.....

04-11-2005, 04:02 PM	#1
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	Wanted: Bed Floor Patch I am in need of a good piece of steel bed floor from a 67-72, im not looking for a reproduction I already have one and its junk! Let me know what you have. Surface rust is fine but no holes. Thanks,Jesse __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap Last edited by Jesse72; 04-11-2005 at 04:04 PM. Reason: email notification

04-11-2005, 04:24 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Bed floor patches Where in ohio? I have a complete bed floor for an 8' bed. Let me know if you're interested. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-11-2005, 09:51 PM	#3
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	About 20 miles west of cleveland, what kind of price you talking? what shape do you have good bed sides also. Please send me some pics crazyracer31r@aol.com __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap

04-11-2005, 09:58 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bed floor You're about 2 hours from me. I want $100 for the whole bed. Floor is good. Pass bedside is junk. Driver side has a pullable dent, but it is big. front panel is good. No gate. was a Texas bed a while back. I'll shoot you some pics from work tomorrow morning. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-12-2005, 08:31 AM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	pics Here are pics of the bed. Bed is $100. For $150, you can have the whole bed and the rear frame part (it was a trailer). The trailing arms are good. It has a 5 lug rear. Tailgate is gone. Let me know if you're interested. Thanks. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-12-2005, 02:58 PM	#6
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	can it be pulled as a trailer right now?? how are the inner fender wheels __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap

04-12-2005, 03:48 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	trailer Sort of. The guy I bought it from wanted the tongue part back (I've had it for a while and I keep forgetting to send it back, plus, it's so much easier to move around). There are no lights hooked up. I guess I could ask him if you took and returned it if it would be ok. One of the fender wells looked like it had a couple of pin sized holes. The other one looked good. If you are serious about it, I can sweep out the back and take a better look around the edges. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

04-13-2005, 05:54 AM	#8
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	if you decide that you would part out the bed; what would be my cost for the front panel shippped to Portland OR, 97233 ?? ( maybe the freight might be so high as to not be worth it !! ) __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

04-13-2005, 10:00 AM	#9
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	I must fully agree on the bed patch panels being junk. They are not only much thinner than original, but the ribs are a different width. Try making that match up perfect. I'm having to use some creative welding to patch the front 2' of my bed floor. __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

04-13-2005, 06:52 PM	#10
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	I may also be interested in the bed if Jesse passes, I just want the floor though... Let me know. Thanks, Travis __________________ 71 Chevy Long Bed (gettin' bagged) 84 GMC K1500 (Sold) 85 Monte Carlo SS white w/gray int. (being a dumba** and totaled it ) 85 Monte Carlo SS clone T-top (Sold) 72 Chevelle-tubbed 64 Buick Sportwagon

04-14-2005, 02:32 PM	#11
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	i will pass if you are intrested i dont have the time right now to pick it up __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap

04-14-2005, 02:48 PM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bed Anyone else interested in the whole bed? I don't have time to tear it apart right now. I do have a local guy that is "kinda" interested, but I know how that goes..... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.