|
04-15-2005, 03:37 PM
|
#1 |
|
Registered User
Join Date: Mar 2005
Posts: 11
|
what type springs
I've got a 72 c-10 sw and the springs have been cut. My wheels are 18's and it rides like s***. My question is with drop spindles, what size springs should I run? stock or lowered, and how low for a good ride. thanks for any advice.
|
|
|
|
04-15-2005, 05:07 PM
|
#2 |
|
C10 Club Tennessee
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,281
|
Depends on how low you want to go. Most drop spindles are 2 1/2 inches. If that's all you want to go then just get spindles and find some stock springs.
Also how low is your truck now. If the springs have been cut too much then it probably will ride like crap. You aren't supposed to cut more than one coil off the stock spring.
__________________
Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
