For all you longhorn fans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chief bobber · 04-17-2005, 07:20 PM

Here is my 1 ton dump, She ain't pretty but for the last 18 years or so she has worked her heart out. The dump is out of a 58 international and is welded into the frame. I tried to take some shots of the dump but the thorns had other ideas. I need to go through her again. I smoked the motor two years back towing a farmall H home from the Canadian border.

*dtlilly* · 04-17-2005, 07:25 PM

Thanks for the pics, I think that's a cool looking hood, is it all metal?

1STtimePRo'71 · 04-17-2005, 07:25 PM

Sweet Hood! I like that truck. You should stick more money into it or sell it to me.

LUV2XCLR8 · 04-17-2005, 07:57 PM

IS THAT ONE OF THOSE "HICKEY" AFTERMARKET HOODS

chief bobber · 04-17-2005, 08:40 PM

That hood was on a blazer that I pulled out of a real mess on a moutain top. The PO came to my house and said if I could get it out I could have it. Thanks Buddy all mine.
It is made of fiberglass. Tomorrow I'll see if I can find a name on it. I would sell the truck but, I've got over $600 in it. Where would I find anyone foolish enough to give me that kinda money.

Brainchild · 04-17-2005, 08:42 PM

Cool truck,looks like a donor van in front of it there

Longhorn Man · 04-17-2005, 08:49 PM

You are aware that this is not a longhorn, right?

chief bobber · 04-17-2005, 09:09 PM

Don't really know what constitutes a long horn, In fact I just heard the term for the first time a week back. I just know it's a good truck with a nine ft box that never backed down from any challenge I threw it's way.

Longhorn Man · 04-17-2005, 09:34 PM

ok, the longhorn would have an 8 1/2 foot bed, on the same chassis as your one ton.
In all reality, i'm thinking there were less 9 foot step sides built than longhorns anyways.

**special-K** · 04-17-2005, 09:36 PM

Although not officially named a "Longhorn"(they were Fleetsdes),it`s ok to think of it as a "Stepside Longhorn".I think that is a Hickey hood.Don`t know of anyone else to make one.They were for better visibility(off-road).That`s a cool 9-footer!More nostalgia here.I think those wheels are Western Bullets.

chief bobber · 04-17-2005, 10:05 PM

Thanks , I'm really learning a lot on these boards. The hood has always started conversations. I have to be careful when I open it as I never softened the springs.

69 longhorn · 04-18-2005, 05:24 AM

Well, I dont see the pics(maybe something up with my puter).......hotrod longhorn is in my sig tho(click /paste),.....he!! on wheels!

L

04-17-2005, 07:20 PM	#1
chief bobber Sanity is a state of mind Join Date: Apr 2005 Location: New Humpshire Posts: 93	For all you longhorn fans Here is my 1 ton dump, She ain't pretty but for the last 18 years or so she has worked her heart out. The dump is out of a 58 international and is welded into the frame. I tried to take some shots of the dump but the thorns had other ideas. I need to go through her again. I smoked the motor two years back towing a farmall H home from the Canadian border. Attached Images __________________ 67 K-10 8ft step 250/465/timken 4 shaft/373 to 1 70 C-10 Panel Vortec V/5spd BW od /307 to 1 70 C-30 9ft stepside dump 350/465/ posi and a few too many other trucks, cars, jeeps, cruisiers, and M/Cs ...o~`o Last edited by chief bobber; 04-17-2005 at 08:22 PM. Reason: Bad childhood

04-17-2005, 07:25 PM	#3
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Sweet Hood! I like that truck. You should stick more money into it or sell it to me. __________________ -Cory 1967 2 Wheel Chevy

04-17-2005, 07:57 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	IS THAT ONE OF THOSE "HICKEY" AFTERMARKET HOODS __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-17-2005, 08:40 PM	#5
chief bobber Sanity is a state of mind Join Date: Apr 2005 Location: New Humpshire Posts: 93	That hood was on a blazer that I pulled out of a real mess on a moutain top. The PO came to my house and said if I could get it out I could have it. Thanks Buddy all mine. It is made of fiberglass. Tomorrow I'll see if I can find a name on it. I would sell the truck but, I've got over $600 in it. Where would I find anyone foolish enough to give me that kinda money. __________________ 67 K-10 8ft step 250/465/timken 4 shaft/373 to 1 70 C-10 Panel Vortec V/5spd BW od /307 to 1 70 C-30 9ft stepside dump 350/465/ posi and a few too many other trucks, cars, jeeps, cruisiers, and M/Cs ...o~`o

04-17-2005, 08:42 PM	#6
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Cool truck,looks like a donor van in front of it there __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

04-17-2005, 07:25 PM	#2
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Thanks for the pics, I think that's a cool looking hood, is it all metal?

04-17-2005, 08:49 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	You are aware that this is not a longhorn, right?

04-17-2005, 09:09 PM	#8
chief bobber Sanity is a state of mind Join Date: Apr 2005 Location: New Humpshire Posts: 93	Don't really know what constitutes a long horn, In fact I just heard the term for the first time a week back. I just know it's a good truck with a nine ft box that never backed down from any challenge I threw it's way. __________________ 67 K-10 8ft step 250/465/timken 4 shaft/373 to 1 70 C-10 Panel Vortec V/5spd BW od /307 to 1 70 C-30 9ft stepside dump 350/465/ posi and a few too many other trucks, cars, jeeps, cruisiers, and M/Cs ...o~`o

04-17-2005, 09:34 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	ok, the longhorn would have an 8 1/2 foot bed, on the same chassis as your one ton. In all reality, i'm thinking there were less 9 foot step sides built than longhorns anyways.

04-17-2005, 09:36 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Although not officially named a "Longhorn"(they were Fleetsdes),it`s ok to think of it as a "Stepside Longhorn".I think that is a Hickey hood.Don`t know of anyone else to make one.They were for better visibility(off-road).That`s a cool 9-footer!More nostalgia here.I think those wheels are Western Bullets. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-17-2005, 10:05 PM	#11
chief bobber Sanity is a state of mind Join Date: Apr 2005 Location: New Humpshire Posts: 93	Thanks , I'm really learning a lot on these boards. The hood has always started conversations. I have to be careful when I open it as I never softened the springs. __________________ 67 K-10 8ft step 250/465/timken 4 shaft/373 to 1 70 C-10 Panel Vortec V/5spd BW od /307 to 1 70 C-30 9ft stepside dump 350/465/ posi and a few too many other trucks, cars, jeeps, cruisiers, and M/Cs ...o~`o

04-18-2005, 05:24 AM	#12
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Well, I dont see the pics(maybe something up with my puter).......hotrod longhorn is in my sig tho(click /paste),.....he!! on wheels! L __________________ http://community.webshots.com/user/hotrodhorn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.