Anyone Need Some Decent Barn Doors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mark540 · 09-17-2003, 05:08 PM

I have a set I would like to get out of the garage, little surface rust underneath none on the outside panel. $125 to your door. Wanted to add the Chevrolet emblem is now gone.

Thanks,

Mark

68 Suburban · 09-18-2003, 01:39 AM

$125 shipped? I would be interested.

jose · 09-18-2003, 02:38 AM

Last time i shipped a burb door it was expensive !

Mark540 · 09-18-2003, 08:11 AM

Just want to get rid of them, so if I can cover shipping I am happy. 68 suburban they are yours if you want them, but they are probably not as clean as ones you would find in your neck of the woods. Heck if you go another 4 or 5 hours from Chicago I have a motor you can have, rebuilt with about 4000 miles on it before the clutch went out. 350, edelbrock carb, headers, all accessories. Your truck would be very tempting.

GMCjunkie · 09-18-2003, 10:00 AM

Just FYI, If I remember right when I bought my barn doors and had them shipped from Texas to Ca. it was only about $72.00. They were shipped via Greyhound.

**CPNE** · 09-18-2003, 10:02 AM

If Chris doesn't want them I do for $125 delivered! My ZIP is 03580 if you want to check on the cost.

Mark540 · 09-18-2003, 11:14 AM

Thanks, guys and gals, I think I can get them out at least at break even. I don't need them so I would rather see someone get them that needed them. Smokekiki wanted them, but couldn't afford them because of some unfortunate circumstances, I offered to send them to him anyway, but he said he couldn't let me do that, so just trying to make space for the project in the garage.

I have more pics if interested, but should probably be sent via e-mail as they are high resolution. Forgot to add my buddy(nameless) cut the hinges instead of unbolting them, so at least the hinge side that attaches to the burb itself needs replaced.

Thanks,

Mark

**CPNE** · 09-18-2003, 11:19 AM

PM'd you with e-mail address for pics.

68 Suburban · 09-18-2003, 05:51 PM

CPNE can have them

Thanks Hmmmm and engine!!!!

Mark540 · 09-19-2003, 03:35 PM

Sold to CPNE, thanks Jeff!

dmurphy68 · 09-21-2003, 09:28 AM

Man I am a day late and a $ short. I could of came up and got them. What else you got anything good?

Mark540 · 09-22-2003, 10:00 AM

Well, as far as panel/suburban specific stuff, not much that I am not going to be using. Need a recently rebuilt motor? I am going with an LT1, $350 obo complete with everything. Edelbrock carb etc. The only other thing would be a 70 GMC hood if you want it you can have it I am going with a 68 chevy front end. Oh yeah have a suburban gas filler neck, no tank as well.

7T1BURB · 09-28-2003, 06:28 AM

MARK540:
If the Suburban gas filler neck is still available, I'd like to get it. Please figure cost and shipping to 23608 (Newport News, VA). Thanks!..7T1Burb

mockdude · 04-19-2005, 02:55 AM

If you got them I'm interested

mockdude@yahoo.com

09-17-2003, 05:08 PM	#1
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Anyone Need Some Decent Barn Doors? I have a set I would like to get out of the garage, little surface rust underneath none on the outside panel. $125 to your door. Wanted to add the Chevrolet emblem is now gone. Thanks, Mark Attached Images __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's Last edited by Mark540; 09-17-2003 at 05:10 PM.

09-18-2003, 01:39 AM	#2
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	$125 shipped? I would be interested. __________________ Just sitting here contemplating contemplation.

09-18-2003, 02:38 AM	#3
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Last time i shipped a burb door it was expensive ! __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

09-18-2003, 08:11 AM	#4
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Just want to get rid of them, so if I can cover shipping I am happy. 68 suburban they are yours if you want them, but they are probably not as clean as ones you would find in your neck of the woods. Heck if you go another 4 or 5 hours from Chicago I have a motor you can have, rebuilt with about 4000 miles on it before the clutch went out. 350, edelbrock carb, headers, all accessories. Your truck would be very tempting. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

09-18-2003, 10:00 AM	#5
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Just FYI, If I remember right when I bought my barn doors and had them shipped from Texas to Ca. it was only about $72.00. They were shipped via Greyhound. __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

09-18-2003, 10:02 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	If Chris doesn't want them I do for $125 delivered! My ZIP is 03580 if you want to check on the cost. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-18-2003, 11:14 AM	#7
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Thanks, guys and gals, I think I can get them out at least at break even. I don't need them so I would rather see someone get them that needed them. Smokekiki wanted them, but couldn't afford them because of some unfortunate circumstances, I offered to send them to him anyway, but he said he couldn't let me do that, so just trying to make space for the project in the garage. I have more pics if interested, but should probably be sent via e-mail as they are high resolution. Forgot to add my buddy(nameless) cut the hinges instead of unbolting them, so at least the hinge side that attaches to the burb itself needs replaced. Thanks, Mark __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

09-18-2003, 11:19 AM	#8
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	PM'd you with e-mail address for pics. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

09-18-2003, 05:51 PM	#9
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	CPNE can have them Thanks Hmmmm and engine!!!! __________________ Just sitting here contemplating contemplation.

09-19-2003, 03:35 PM	#10
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Sold to CPNE, thanks Jeff! __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

09-21-2003, 09:28 AM	#11
dmurphy68 Registered User Join Date: Nov 2002 Location: Middletown ohio Posts: 1,058	Man I am a day late and a $ short. I could of came up and got them. What else you got anything good? __________________ The very atmosphere of firearms everywhere restrains evil interference. When firearms go, all goes, we need them every hour. - George Washington No free man shall be debarred the use of arms - Thomas Jefferson Later Darren http://www.myspace.com/dmurphy68

09-22-2003, 10:00 AM	#12
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Well, as far as panel/suburban specific stuff, not much that I am not going to be using. Need a recently rebuilt motor? I am going with an LT1, $350 obo complete with everything. Edelbrock carb etc. The only other thing would be a 70 GMC hood if you want it you can have it I am going with a 68 chevy front end. Oh yeah have a suburban gas filler neck, no tank as well. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

09-28-2003, 06:28 AM	#13
7T1BURB Registered User Join Date: Aug 2002 Location: Newport News, VA Posts: 190	MARK540: If the Suburban gas filler neck is still available, I'd like to get it. Please figure cost and shipping to 23608 (Newport News, VA). Thanks!..7T1Burb

04-19-2005, 02:55 AM	#14
mockdude Registered User Join Date: Jan 2005 Location: Brentwood, California Posts: 13	I could use them If you got them I'm interested mockdude@yahoo.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.