Found a '69 C/20 stepside at the junkyard(south TX) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robert1970C20rstbukt · 03-10-2005, 11:19 PM

I just bought the grille/front bumper off of a '69 3/4 ton stepside at the local yard this week. It has a leaf spring Dana rear end, but the engine/tranny is gone. It was an auto truck, non tilt column but it's there, even has the pointer and fiber optic cable! There's a lot of good parts on this truck. Rear end, drums might be OK, spindles, front springs, etc. Just thought I'd let someone know. I couldn't really tell what kind of shape the bed floor is in, the stepsides have some bondo on 'em, but they look salvageable. If someone is interested let me know I can get prices on parts.

1969 GMC · 03-11-2005, 12:30 AM

dang...I have been on the lookout for a cheap stepside...but thats too far to go, and nothing to drag it home with.

HOTFUN · 03-11-2005, 09:02 AM

Robert
I thought you were also looking for an automatic pointer and fiber cable? I still need a nice pointer and cable for a 67-70 if you can get it. Let me know.
Thanks
Mark

Robert1970C20rstbukt · 03-20-2005, 09:48 PM

Sorry I hadn't replied in a while guys, I forgot about posting this.

Adam- I'd bet you could get the bed cheap but yeah distance is an issue alright.

Mark- I would have taken that fiber optic cable/pointer in a heartbeat but he won't part out the steering column. quote: "no, either you buy the column or you leave it alone"

Yeah I could just take it but he always keeps his eye on those 67-72 trucks that he's got, and I don't wanna piss him off.

Robert1970C20rstbukt · 04-23-2005, 11:19 PM

Well, BAD NEWS on the stepside. It was crushed yesterday.

And today when I went out there to buy the RUST FREE hood off of it, the truck was gone. I was like, hey man, where's the blue 3/4 ton stepside you had? "oh i crushed it yesterday i think"

I also had the opportunity to see an awesome shape 68 c10 stepside get crushed, then stacked between two oldmobiles. You could still see the bowtie 10 emblem on the fender sticking out.

**special-K** · 04-24-2005, 08:18 AM

They hate to part-out components like steering columns.The Crusher needs a balanced diet.(Ignorant<editted> SOB!!)

Robert1970C20rstbukt · 04-24-2005, 06:29 PM

Yeah that was another thing I was pissed about. It was either buy the column for 50 bucks or don't touch it. I sure as hell wasn't gonna pay 50 bucks for a fiber optic cable and pointer assembly, even though it was mint. The chrome indicator was awesome too.

*bisquik65* · 04-24-2005, 08:27 PM

I dont know what the price for junk cars is in texas,but here in johnson city tennesse they pay you $5.00 a hundred lbs, A average car will bring you 140 to 175 bucks. People are driving them in there ,pulling the tank and wheels and get the $$ That is sad..

I want to look at a 70 jimmy cst with all trim panels,got there,just coming out of the chrusher?

03-10-2005, 11:19 PM	#1
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Found a '69 C/20 stepside at the junkyard(south TX) I just bought the grille/front bumper off of a '69 3/4 ton stepside at the local yard this week. It has a leaf spring Dana rear end, but the engine/tranny is gone. It was an auto truck, non tilt column but it's there, even has the pointer and fiber optic cable! There's a lot of good parts on this truck. Rear end, drums might be OK, spindles, front springs, etc. Just thought I'd let someone know. I couldn't really tell what kind of shape the bed floor is in, the stepsides have some bondo on 'em, but they look salvageable. If someone is interested let me know I can get prices on parts. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

03-11-2005, 12:30 AM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	dang...I have been on the lookout for a cheap stepside...but thats too far to go, and nothing to drag it home with. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

03-11-2005, 09:02 AM	#3
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Robert I thought you were also looking for an automatic pointer and fiber cable? I still need a nice pointer and cable for a 67-70 if you can get it. Let me know. Thanks Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

03-20-2005, 09:48 PM	#4
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Sorry I hadn't replied in a while guys, I forgot about posting this. Adam- I'd bet you could get the bed cheap but yeah distance is an issue alright. Mark- I would have taken that fiber optic cable/pointer in a heartbeat but he won't part out the steering column. quote: "no, either you buy the column or you leave it alone" Yeah I could just take it but he always keeps his eye on those 67-72 trucks that he's got, and I don't wanna piss him off. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 03-20-2005 at 09:50 PM.

04-23-2005, 11:19 PM	#5
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Well, BAD NEWS on the stepside. It was crushed yesterday. And today when I went out there to buy the RUST FREE hood off of it, the truck was gone. I was like, hey man, where's the blue 3/4 ton stepside you had? "oh i crushed it yesterday i think" I also had the opportunity to see an awesome shape 68 c10 stepside get crushed, then stacked between two oldmobiles. You could still see the bowtie 10 emblem on the fender sticking out. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 04-24-2005 at 06:26 PM.

04-24-2005, 08:18 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	They hate to part-out components like steering columns.The Crusher needs a balanced diet.(Ignorant<editted> SOB!!) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-24-2005, 06:29 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Yeah that was another thing I was pissed about. It was either buy the column for 50 bucks or don't touch it. I sure as hell wasn't gonna pay 50 bucks for a fiber optic cable and pointer assembly, even though it was mint. The chrome indicator was awesome too. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

04-24-2005, 08:27 PM	#8
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I dont know what the price for junk cars is in texas,but here in johnson city tennesse they pay you $5.00 a hundred lbs, A average car will bring you 140 to 175 bucks. People are driving them in there ,pulling the tank and wheels and get the $$ That is sad.. I want to look at a 70 jimmy cst with all trim panels,got there,just coming out of the chrusher?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.