lower bedside toolbox questions! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70GMC_BOB · 04-27-2005, 02:37 PM

My 72 cheyenne has the lower toolbox. the lock is broken(looks like a empty hole but won't open. I want to get it opened to replace the hinges as there is only 1 left holding the door on. I always wated to fix it, but living in a condo there s no place. I am currently moving into a rental house with a 2 car garage and want to get so i can open and close it. I am not worried about locking it as it will just be used to store a tarp and some bungies.

70GMC_BOB · 04-27-2005, 04:30 PM

GOT A REPLY FROM WES CLASSIC HEARTBEAT AND HE USED A LONG SCREWDRIVER TO DEPRESS THE TAG. i WONDER IF YOU COULD MODIFY THE LOCK TO WORK WITH A SCREWDRIVER??

70GMC_BOB · 04-27-2005, 04:33 PM

Here's What It Looks Like!

70GMC_BOB · 04-27-2005, 04:40 PM

Had To Resize Them, But Here You Go!

Cethern · 04-27-2005, 05:12 PM

I'm just gessing that a door lock would work....I'm sure someone has a better idea

GMC Jim · 04-28-2005, 05:34 AM

I would check with an office supply store. One that sells desks, file cabinets etc... Look at the locks on these items. They seem to be about the right size and type of lock you would need.

04-27-2005, 02:37 PM	#1
70GMC_BOB Registered User Join Date: Jul 2001 Location: Lynnwood, washington Posts: 121	lower bedside toolbox questions! My 72 cheyenne has the lower toolbox. the lock is broken(looks like a empty hole but won't open. I want to get it opened to replace the hinges as there is only 1 left holding the door on. I always wated to fix it, but living in a condo there s no place. I am currently moving into a rental house with a 2 car garage and want to get so i can open and close it. I am not worried about locking it as it will just be used to store a tarp and some bungies. __________________ 1972 chev c20 2wd lwb 350v8/th350. (dad's)1970 gmc longstep (9ft commercial bed), 1 ton, 2wd, 350/th400.

04-27-2005, 04:30 PM	#2
70GMC_BOB Registered User Join Date: Jul 2001 Location: Lynnwood, washington Posts: 121	GOT A REPLY FROM WES CLASSIC HEARTBEAT AND HE USED A LONG SCREWDRIVER TO DEPRESS THE TAG. i WONDER IF YOU COULD MODIFY THE LOCK TO WORK WITH A SCREWDRIVER?? __________________ 1972 chev c20 2wd lwb 350v8/th350. (dad's)1970 gmc longstep (9ft commercial bed), 1 ton, 2wd, 350/th400.

04-27-2005, 04:33 PM	#3
70GMC_BOB Registered User Join Date: Jul 2001 Location: Lynnwood, washington Posts: 121	Here's What It Looks Like! __________________ 1972 chev c20 2wd lwb 350v8/th350. (dad's)1970 gmc longstep (9ft commercial bed), 1 ton, 2wd, 350/th400.

04-27-2005, 04:40 PM	#4
70GMC_BOB Registered User Join Date: Jul 2001 Location: Lynnwood, washington Posts: 121	Had To Resize Them, But Here You Go! Attached Images __________________ 1972 chev c20 2wd lwb 350v8/th350. (dad's)1970 gmc longstep (9ft commercial bed), 1 ton, 2wd, 350/th400.

04-27-2005, 05:12 PM	#5
Cethern What was I thinking?? Join Date: Dec 2003 Location: Commerce City Co Posts: 637	I'm just gessing that a door lock would work....I'm sure someone has a better idea __________________ 72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit...

04-28-2005, 05:34 AM	#6
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	I would check with an office supply store. One that sells desks, file cabinets etc... Look at the locks on these items. They seem to be about the right size and type of lock you would need. __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.