![]() |
![]() |
#1 |
Senior Member
Join Date: Aug 2002
Location: Plymouth, MA
Posts: 891
|
Best Price On Mounts
I am getting ready to buy a set of body mounts ($49.39 Summit), LS1 engine mount adapters ($39.95 E-bay), and need a set of core support mounts (????). I am just wondering if these are good prices and if anyone has input or a better place to get these. I also need to find a place that sells a good core support mount kit.
__________________
1972 Blazer body...need to get a thread started for the rest of the story |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2002
Location: Plymouth, MA
Posts: 891
|
I was looking at the Energy Suspension kit and it looks like it may have the core support mounts. As anyone used this kit? ENS-3-4108G Thanx
__________________
1972 Blazer body...need to get a thread started for the rest of the story |
![]() |
![]() |
![]() |
#3 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
TTT
You mean, someone makes LS1 engine mount adapters for our truck? The whole thing that's been swaying me away from this install is the fact that I was told I'd need to custom fab some engine mounts. ![]()
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Aug 2002
Location: Plymouth, MA
Posts: 891
|
The mounts I am looking at say they are for Camaro Chevelle Nova Corvettes and Impala. They use the same 3 bolt style engine mount as our trucks.
http://cgi.ebay.com/ebaymotors/ws/eB...category=50454 I am sure they will work.
__________________
1972 Blazer body...need to get a thread started for the rest of the story |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 1999
Location: BRADENTON FLA
Posts: 3,269
|
We make the LS1 aluminum mounts here for the trucks. Email for pics and prices motrucker@prodigy.net
__________________
Rest in Peace Ed. Thanks for all the good times. |
![]() |
![]() |
![]() |
#6 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,376
|
Ed,
I'm going to be @ the parents down in Bradenton for a block party on 5/7. Is this something you have in stock and I could swing by to look at? Also - is it all mounts that are necessary for dropping an LS1 into the truck or ?? (I'm guessing it will take 4 mounts). I believe you can just move the tranny xmember back on the frame to support a T56. Not sure if the high hum is needed. This is definitely a project I want to take on in the next year. Want to get all the mounts and other stuff together before I look into the drivetrain.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 04-28-2005 at 10:53 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|