Parts for sale in NC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Harold Shepard · 04-14-2005, 03:51 PM

I have a couple of things that need new homes if anyone is interested. Upper control arm passenger side from 71 2wd $10, lower control arm from a 69 2wd drivers side $10. center link from 2wd 69 pickup$25, a pair of air shocks work but need new lines $25, manual trans crossmember$10, pair of "new" bumper guards 71-72 style $30 pending Ken Betz , pair of "new" GM bumper guards for 73+ never installed and still in rough GM boxes $65. 3 speed column for parts, upper collar (where shift arm attaches is worn)$10, pair of chevrolet script valve covers in very good shape$25 Pending QK silver, 67-68 vent assembly for sb chevy (pre pcv)$5. Still have kick down for th400 $5 (71-72 style) pending Ken Betz. Please reply in this thread to avoid confusion if anything strikes your fancy. I may have some other things just ask- I am always willing to trade for other things. Harold

ken betz · 04-14-2005, 06:20 PM

Harold,
I am interested in these two items
Do you have any photo's? or Please PM me your phone number
Thanks
Ken Betz

Harold Shepard · 04-15-2005, 08:19 AM

ttt

UP GRADE · 04-15-2005, 08:36 AM

i'm interested in the the trans. crossmember how much to ship to 38118.

JPSAUTO · 04-16-2005, 07:23 AM

Harold, I need a decent hard vacuum line with the bolt down tab for the brake booster, got one? Thanks for the help on the BB heat stove, I now have three but all are paper thin. JOHN

1STtimePRo'71 · 04-16-2005, 06:41 PM

R the valve covers for a sbc? And more info on the air shocks plz.

cowboy33713 · 04-16-2005, 07:52 PM

Howdy;
I can use that driver's side lower control arm for my 2wd 1/2 ton. Interested in that trans kickdown if that other fella doesn't take it.Shipping to 33713
Thanks!
cowboy33713

Harold Shepard · 04-17-2005, 01:19 AM

1st time- valve covers are already spoken for. The air shocks were bought new about five yeas ago, they need new lines but are in very good shape physically, cosmetically they could use some paint. They were used to raise a truck with chevelle rear springs, the bumper would drag if anyone got in the bed.....
Cowboy- shipping will be around $8 USPS- the lower ball joint needs to be replaced- 30 + years but the shaft seems OK. If something changes on kick down I will let you know. Harold

cowboy33713 · 04-17-2005, 09:15 AM

Harold:
sent you a PM
cowboy

UP GRADE · 04-28-2005, 01:51 PM

Harold Sent You A Pm. Up Grade

GMC Jim · 04-28-2005, 03:53 PM

would like the bumper guards. Put me in line please.... Need these for my '71 GMC.. Thanks... Jim

tphsmith · 04-28-2005, 08:45 PM

Im looking for a lower A arm for passenger side 1/2 ton my truck is a 762, also harold you think ya might have the A/c cowl vent deflector , sure would like to find one from somebody

04-14-2005, 03:51 PM	#1
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	Parts for sale in NC I have a couple of things that need new homes if anyone is interested. Upper control arm passenger side from 71 2wd $10, lower control arm from a 69 2wd drivers side $10. center link from 2wd 69 pickup$25, a pair of air shocks work but need new lines $25, manual trans crossmember$10, pair of "new" bumper guards 71-72 style $30 pending Ken Betz , pair of "new" GM bumper guards for 73+ never installed and still in rough GM boxes $65. 3 speed column for parts, upper collar (where shift arm attaches is worn)$10, pair of chevrolet script valve covers in very good shape$25 Pending QK silver, 67-68 vent assembly for sb chevy (pre pcv)$5. Still have kick down for th400 $5 (71-72 style) pending Ken Betz. Please reply in this thread to avoid confusion if anything strikes your fancy. I may have some other things just ask- I am always willing to trade for other things. Harold Last edited by Harold Shepard; 04-14-2005 at 08:48 PM.

04-14-2005, 06:20 PM	#2
ken betz AKA willie127 Join Date: Jul 2004 Location: Lake City, GA Posts: 72	71-2 bumper guards & th400 kickdown Harold, I am interested in these two items Do you have any photo's? or Please PM me your phone number Thanks Ken Betz

04-15-2005, 08:36 AM	#4
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	i'm interested in the the trans. crossmember how much to ship to 38118. Last edited by UP GRADE; 04-15-2005 at 08:49 AM.

04-16-2005, 06:41 PM	#6
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	R the valve covers for a sbc? And more info on the air shocks plz. __________________ -Cory 1967 2 Wheel Chevy

04-16-2005, 07:52 PM	#7
cowboy33713 Senior Member Join Date: Apr 2005 Location: metro Phoenix, AZ Posts: 241	some parts Howdy; I can use that driver's side lower control arm for my 2wd 1/2 ton. Interested in that trans kickdown if that other fella doesn't take it.Shipping to 33713 Thanks! cowboy33713

04-15-2005, 08:19 AM	#3
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	ttt

04-16-2005, 07:23 AM	#5
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Harold, I need a decent hard vacuum line with the bolt down tab for the brake booster, got one? Thanks for the help on the BB heat stove, I now have three but all are paper thin. JOHN

04-17-2005, 01:19 AM	#8
Harold Shepard Registered User Join Date: May 2004 Location: Canton North Carolina Posts: 466	1st time- valve covers are already spoken for. The air shocks were bought new about five yeas ago, they need new lines but are in very good shape physically, cosmetically they could use some paint. They were used to raise a truck with chevelle rear springs, the bumper would drag if anyone got in the bed..... Cowboy- shipping will be around $8 USPS- the lower ball joint needs to be replaced- 30 + years but the shaft seems OK. If something changes on kick down I will let you know. Harold

04-17-2005, 09:15 AM	#9
cowboy33713 Senior Member Join Date: Apr 2005 Location: metro Phoenix, AZ Posts: 241	lower A arm, drivers Harold: sent you a PM cowboy

04-28-2005, 01:51 PM	#10
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Harold Sent You A Pm. Up Grade

04-28-2005, 03:53 PM	#11
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	would like the bumper guards. Put me in line please.... Need these for my '71 GMC.. Thanks... Jim __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

04-28-2005, 08:45 PM	#12
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Im looking for a lower A arm for passenger side 1/2 ton my truck is a 762, also harold you think ya might have the A/c cowl vent deflector , sure would like to find one from somebody __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.