Parts for sale,Need money! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 04-25-2005, 03:00 PM

I need to move these parts quickly do too lack of money. They are:

Street /strip fuel pump SBC rebuilt $35.00

Aeroquip 1/2" fuel line with fittings 1 90 deg 1 straight $55.00
hose and fittings are new in box never used.

Stud girdles for SBC used two nights on dirt car $20.00 (sold)

I need the money badly so please take these items off my hands so I can pay a bill. These prices are without shipping so figure from 28117 North Caroilina.

shortbed70 · 04-25-2005, 10:42 PM

Ttt Anybody??

muddyole 69 · 04-26-2005, 03:18 AM

what brand are the girdles ? Pm me I am interested Mike

shortbed70 · 04-26-2005, 08:47 PM

Ttt

shortbed70 · 04-27-2005, 02:41 PM

331 lookers and not even a ttt come one guys I need to move this stuff. Stud girdles pending!

shortbed70 · 04-28-2005, 05:11 PM

Girdles sold. Come on guys the fuel line and fittings alon go for $75 from summit your saving 20+ dollers. I was planning on using on a dirt car but sold the car then the motor that I ended up buying back. Parts for sale on it also. Block is 40 over 350 with crack in exterior below head but internals are very low milage. I had some parts for sale before and buyer didn't pay so it's back.

Pistons are cast speed-pro FT's 4 reliefs with stock rods $50.00+ship
Crank is autozone regrind 20/20 rod/mains 3.480 stroke $40.00+ship
Heads are rebuilt with Z28 springs new seals gasket matched. $100.00+ship

Motor ran fine just leaked antifreeze out side if you had a 40 over 350 block this would be a great start. If you buy the pistons/rod assembly I will throw in a new set of hastings rings thats only missing one set of rings oil/comp/scrapers.

These parts are in Kansas so I am unable to take pics but I GARANTEE they are in good working order and I have to have someone pull them apart for me. YOU figure shipping from 66502!

shortbed70 · 04-29-2005, 06:26 PM

TTT Anyone if you look and its at the bottom can I get a TTT please! I need to sell this stuff and if you guys aren't interested I'll post elsewere.

RON WOODGEARD · 04-29-2005, 06:38 PM

What's the casting #s on the heads?

shortbed70 · 04-29-2005, 07:56 PM

I can't remember the casting number but they are 76cc 1.94-1.50 heavyweight castings w/z-28 springs and new blue locks and new retainers. The heads are in Kansas because I had no room when I moved down to put them. I am trying to get pics of them but its not easy. Heres a pic of the symbol on the front I know theres a book that shows the heads with that casting mark. They are gasket matched on intake side also. They might be 33998993

AesC10s · 04-29-2005, 08:37 PM

What year is the engine if they are the right year i might be interested in the heads. Aaron

shortbed70 · 04-29-2005, 10:02 PM

Block is no good for street and the heads are different year. These parts are in KS and I'm trying to line up my father in law to get some pics for me. If I'm right on casting #s they are 72-73 They have hard seats and 6 exhaust bolt holes w/acc holes.

RON WOODGEARD · 04-29-2005, 10:57 PM

Quote:

Originally Posted by shortbed70

Block is no good for street and the heads are different year. These parts are in KS and I'm trying to line up my father in law to get some pics for me. If I'm right on casting #s they are 72-73 They have hard seats and 6 exhaust bolt holes w/acc holes.

I do not have a spare head to use for shipping cost, If you can get shipping cost to 89410 and it's not" too much", I'll take them.
are you set up for PAYPAL?

If someone wants them without shipping Quote, Jump on it...

Ron

Email Me at, Ron.Woodgeard@Gmail.com

shortbed70 · 04-29-2005, 11:19 PM

I forgot I am set up for paypal. My father in law has the key to the storage unit and hes in texas so I've got to get ahold of him to see when hes going to be back.

RON WOODGEARD · 04-29-2005, 11:51 PM

Quote:

Originally Posted by shortbed70

I forgot I am set up for paypal. My father in law has the key to the storage unit and hes in texas so I've got to get ahold of him to see when hes going to be back.

That's fine, I'm in no Big Hurry...

Ron

shortbed70 · 04-30-2005, 12:12 AM

I'll keep you posted and when I get ahold of him I'll let you know.

RON WOODGEARD · 04-30-2005, 10:07 AM

Quote:

Originally Posted by shortbed70

I'll keep you posted and when I get ahold of him I'll let you know.

Just drop me an e-mail.

shortbed70 · 05-02-2005, 09:02 PM

I still have fuel line and pump and pistons/rods,crankshaft. TTT

04-25-2005, 03:00 PM	#1
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Parts for sale,Need money! I need to move these parts quickly do too lack of money. They are: Street /strip fuel pump SBC rebuilt $35.00 Aeroquip 1/2" fuel line with fittings 1 90 deg 1 straight $55.00 hose and fittings are new in box never used. Stud girdles for SBC used two nights on dirt car $20.00 (sold) I need the money badly so please take these items off my hands so I can pay a bill. These prices are without shipping so figure from 28117 North Caroilina. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 04-28-2005 at 04:48 PM.

04-25-2005, 10:42 PM	#2
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Ttt Anybody?? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-26-2005, 03:18 AM	#3
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	parts what brand are the girdles ? Pm me I am interested Mike __________________ hav'n fun be'n me

04-26-2005, 08:47 PM	#4
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Ttt __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-27-2005, 02:41 PM	#5
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	331 lookers and not even a ttt come one guys I need to move this stuff. Stud girdles pending! __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 04-27-2005 at 02:42 PM.

04-28-2005, 05:11 PM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Girdles sold. Come on guys the fuel line and fittings alon go for $75 from summit your saving 20+ dollers. I was planning on using on a dirt car but sold the car then the motor that I ended up buying back. Parts for sale on it also. Block is 40 over 350 with crack in exterior below head but internals are very low milage. I had some parts for sale before and buyer didn't pay so it's back. Pistons are cast speed-pro FT's 4 reliefs with stock rods $50.00+ship Crank is autozone regrind 20/20 rod/mains 3.480 stroke $40.00+ship Heads are rebuilt with Z28 springs new seals gasket matched. $100.00+ship Motor ran fine just leaked antifreeze out side if you had a 40 over 350 block this would be a great start. If you buy the pistons/rod assembly I will throw in a new set of hastings rings thats only missing one set of rings oil/comp/scrapers. These parts are in Kansas so I am unable to take pics but I GARANTEE they are in good working order and I have to have someone pull them apart for me. YOU figure shipping from 66502! Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-29-2005, 06:26 PM	#7
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	TTT Anyone if you look and its at the bottom can I get a TTT please! I need to sell this stuff and if you guys aren't interested I'll post elsewere. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-29-2005, 06:38 PM	#8
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	What's the casting #s on the heads?

04-29-2005, 07:56 PM	#9
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I can't remember the casting number but they are 76cc 1.94-1.50 heavyweight castings w/z-28 springs and new blue locks and new retainers. The heads are in Kansas because I had no room when I moved down to put them. I am trying to get pics of them but its not easy. Heres a pic of the symbol on the front I know theres a book that shows the heads with that casting mark. They are gasket matched on intake side also. They might be 33998993 Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-29-2005, 08:37 PM	#10
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	What year is the engine if they are the right year i might be interested in the heads. Aaron

04-29-2005, 10:02 PM	#11
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Block is no good for street and the heads are different year. These parts are in KS and I'm trying to line up my father in law to get some pics for me. If I'm right on casting #s they are 72-73 They have hard seats and 6 exhaust bolt holes w/acc holes. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-29-2005, 11:19 PM	#13
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I forgot I am set up for paypal. My father in law has the key to the storage unit and hes in texas so I've got to get ahold of him to see when hes going to be back. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-30-2005, 12:12 AM	#15
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I'll keep you posted and when I get ahold of him I'll let you know. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

05-02-2005, 09:02 PM	#17
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	I still have fuel line and pump and pistons/rods,crankshaft. TTT __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.