WTB Engine Towers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 05-01-2005, 09:32 AM

I am looking for a set of engine towers. I prefer the ones that set the engine back further (6 cyl, right?) If in the IN/OH area I can pick-up. If not shipping would be to 47374.

Squid4life · 05-01-2005, 10:26 AM

I just removed a 292 I6 from a '69 C-20. The towers were in great shape. I am guessing they weigh about 4-5 lbs? How about $20 shipped? I can get them in the mail tomorrow AM. I have paypal, or you can send a MO. Let me know.

Squid

LUV2XCLR8 · 05-01-2005, 10:46 AM

Yesterday there was a BB set on Evil Bay, What motor are you using

jmanz69 · 05-01-2005, 01:22 PM

You can use the regular SBC towers, they are the same. Just put them in the rear holes and you have them in the L6 position. Moves the engine back, no problem.

I have a set on ebay right now that are powder coated. $15 opening bid... Click here

Harry's 71 C-10 · 05-01-2005, 02:14 PM

I have a set of NEW BB mounts $70 shipped.

jtmiller92 · 05-01-2005, 02:31 PM

Quote:

Originally Posted by jmanz69

You can use the regular SBC towers, they are the same. Just put them in the rear holes and you have them in the L6 position. Moves the engine back, no problem.

I have a set on ebay right now that are powder coated. $15 opening bid... Click here

Are you sure, I tried this jst last week. And although they do bolt to the top two holes it looked like I would have to drill a hole at the bottom to mount the V8 Mount in the I6 Position.......jt

billsbowtie · 05-01-2005, 08:36 PM

v-8 towers will not work where 6 cyl. towers go . each one has there on spot. 8cyl. goes in the 2 front holes. 6cyl goes in the 2 rear holes.

**special-K** · 05-01-2005, 10:53 PM

So, 6cyl towers won`t work in V8 position?

doc70sub · 05-02-2005, 06:14 AM

Nope.....not w/o drilling.

You need the 250 ones, as the 292 has a different type on one side......going on memory here.

Doc

jmanz69 · 05-02-2005, 07:07 AM

My bad, I always thought they would. I've never tried it, but was under the impression they did. Learn something new everyday, right...

NPilot1975 · 05-02-2005, 08:35 AM

I am putting in a LS1. With the adapters I am getting it mounts up just the same as a standard 350. I was planning on using the I6 mounts to move it back further, if there are certain ones I need let me know. Thanx

doc70sub · 05-02-2005, 10:08 AM

I'm running my 350 on the stock 250 6-cylinder mounts & it sits back about 3"w/o not problems (dizzy is closer but manageable, not a problem on the LS-1)....

Doc

Squid4life · 05-02-2005, 06:30 PM

Still have the 292's if they'll work. Let me know.

Squid

NPilot1975 · 05-04-2005, 05:41 AM

Squid-

I bought a set from billsbowtie. He actually PM'ed me first. Thanx

Deuce

Squid4life · 05-04-2005, 09:15 AM

Not a problem. Good luck with the project!

Squid

05-01-2005, 09:32 AM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	WTB Engine Towers I am looking for a set of engine towers. I prefer the ones that set the engine back further (6 cyl, right?) If in the IN/OH area I can pick-up. If not shipping would be to 47374. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-01-2005, 10:26 AM	#2
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	I just removed a 292 I6 from a '69 C-20. The towers were in great shape. I am guessing they weigh about 4-5 lbs? How about $20 shipped? I can get them in the mail tomorrow AM. I have paypal, or you can send a MO. Let me know. Squid __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.

05-01-2005, 10:46 AM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	Yesterday there was a BB set on Evil Bay, What motor are you using __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-01-2005, 01:22 PM	#4
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	You can use the regular SBC towers, they are the same. Just put them in the rear holes and you have them in the L6 position. Moves the engine back, no problem. I have a set on ebay right now that are powder coated. $15 opening bid... Click here Last edited by jmanz69; 05-01-2005 at 01:24 PM.

05-01-2005, 08:36 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	v-8 towers will not work where 6 cyl. towers go . each one has there on spot. 8cyl. goes in the 2 front holes. 6cyl goes in the 2 rear holes. Last edited by billsbowtie; 05-01-2005 at 08:38 PM.

05-01-2005, 02:14 PM	#5
Harry's 71 C-10 Registered User Join Date: Dec 2004 Location: Norfolk, VA Posts: 35	I have a set of NEW BB mounts $70 shipped.

05-01-2005, 10:53 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	So, 6cyl towers won`t work in V8 position? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-02-2005, 06:14 AM	#9
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Nope.....not w/o drilling. You need the 250 ones, as the 292 has a different type on one side......going on memory here. Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400 Last edited by doc70sub; 05-02-2005 at 06:14 AM.

05-02-2005, 07:07 AM	#10
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	My bad, I always thought they would. I've never tried it, but was under the impression they did. Learn something new everyday, right...

05-02-2005, 08:35 AM	#11
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	I am putting in a LS1. With the adapters I am getting it mounts up just the same as a standard 350. I was planning on using the I6 mounts to move it back further, if there are certain ones I need let me know. Thanx __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-02-2005, 10:08 AM	#12
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	I'm running my 350 on the stock 250 6-cylinder mounts & it sits back about 3"w/o not problems (dizzy is closer but manageable, not a problem on the LS-1).... Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

05-02-2005, 06:30 PM	#13
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	Still have the 292's if they'll work. Let me know. Squid __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.

05-04-2005, 05:41 AM	#14
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Squid- I bought a set from billsbowtie. He actually PM'ed me first. Thanx Deuce __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-04-2005, 09:15 AM	#15
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	Not a problem. Good luck with the project! Squid __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.