Reverse light Housing Help needed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 05-04-2005, 07:58 PM

I was just checking to make sure I have continuidity. The green wire is good but I can get a ground in the socket to the housing. Is that the way it should be ?

Thanks.

**pjmoreland** · 05-04-2005, 08:48 PM

With the shifter in the "R" position, you should be able to measure 12 volts between the green wire and the housing. I had one bacum light that wouldn't work until I tightened the housing screws a little to give it a good ground.

05-04-2005, 07:58 PM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Reverse light Housing Help needed. I was just checking to make sure I have continuidity. The green wire is good but I can get a ground in the socket to the housing. Is that the way it should be ? Thanks. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

05-04-2005, 08:48 PM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,981	With the shifter in the "R" position, you should be able to measure 12 volts between the green wire and the housing. I had one bacum light that wouldn't work until I tightened the housing screws a little to give it a good ground.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.