72 parts for sale/trade in North Texas. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 05-02-2005, 09:43 AM

Parts for sale or trade. Came out of 72 Chevy that had been wrecked. All prices are OBO or trade. Let me know what you have. I need 67 dr.fender and hood, rebuildable complete 350, tilt to fit my 67, pass fender for 81-87 Chevy truck. Let me know what you are willing to trade for parts you need, or want to buy.
A/C dash, uncut radio area, $75
Rear window with weather stripping AND deluxe trim in-tact, $50 (tint scratched at each end at the bottom from removal)
Small hump. I cut a huge piece so that you have enough to work with, $40
Would prefer parts picked up as shipping would be expensive. I can meet someone within reasonable mileage for a few bucks to cover diesel.
I also have what is left of the cab, but no pictures of it yet. Floors are really nice except for right at the edge where the rocker begins. Firewall is also very good. If your is rusted at each end, you could use this. NO TITLE. Remaing cab section, (floor and firewall) $75. I can take pics of cab today if someone wants pics. Also have stock tank w/EEC if anyone needs one, $20. This truck was running when wrecked and has been stripped prior to me getting it. NO suspension parts.

fade94 · 05-02-2005, 04:17 PM

top

fade94 · 05-03-2005, 08:34 AM

So nobody needs these parts??

ivancito · 05-03-2005, 11:44 AM

would like to see pictures of the cab
also interested in the A/C dash, uncut radio area
have to see if i have the money to spend first.

fade94 · 05-03-2005, 11:46 AM

I will take pictures of what is left tonight. I have cut the back of the cab to within 6 " of the floor. The hump has been cut, obviously, as well as the dash. The firewall and rest of the floor is there. The roof has been cut off as well. The area above the windshield is spoken for.

ivancito · 05-03-2005, 11:49 AM

thanks

ivancito · 05-03-2005, 11:51 AM

how much to ship the dash?
to hewitt TX 76643

ivancito · 05-03-2005, 11:53 AM

would like the rear window also
how much for shipping, or i might come and get the parts

fade94 · 05-03-2005, 12:03 PM

What other parts for a 69 do you need? Let me know and I will make you a package deal on everything. Your avitar looks like a pretty slick truck so you may not need anything else I have. PM me and I will give you a price to take everything.

ivancito · 05-03-2005, 12:28 PM

avitar isnt mine, need a whole cab, mine has lots of rust, also looking for new rear end (axle and gears)

ivancito · 05-03-2005, 12:29 PM

avitar is what i would like my tuck to be one day

ivancito · 05-03-2005, 12:30 PM

almost forgot need driver door as well

fade94 · 05-03-2005, 01:01 PM

If you don't mind the labor, you could graft in the good parts of this cab onto yours and have a much better platform to work from. I have a door or two, but they aren't much to talk about. I actually have an extra 69 cab and front clip and I have the title to it. But, like all of these trucks, it has rust. I also have a rear end still under the truck. It's a 6 lug under a 69. I'll make you a screaming deal if you come get the parts.

ivancito · 05-03-2005, 01:40 PM

verry interested in the rear end, do you know what the gears are, if the truck was an automatic or not, etc...
I am wanting highway gears, my truck is giving out way to many rpm's at 70mph

and i can make getting the parts happen

fade94 · 05-03-2005, 02:04 PM

I was told the rear end is a 3.08. The rear end out of the 72, has a 3.73, the 3.08 rear is what is in the 69 I bought for my son, so I'm told....

fade94 · 05-04-2005, 08:45 AM

These are pictures of both the underside and inside of what is left of the cab. $50 picked up.

fade94 · 05-04-2005, 08:46 AM

More pictures...

fade94 · 05-04-2005, 02:25 PM

bump

ivancito · 05-04-2005, 06:03 PM

i sent you a PM, found somebody looking for those parts, cant find the time for that kind of drive, 5 hrs from where i live, but appreciate the time you gave. Hope selling the parts to yesterday chevy truck works out for you.

Inspector722 · 05-04-2005, 11:47 PM

I have a hood off my 67. Some surface rust but no holes. Straight, no dents. $50

flip66 · 05-05-2005, 01:03 AM

I am going to east texas the 21st Kilgore longview area for a wedding I can take some parts that far just let me know.

05-02-2005, 09:43 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	72 parts for sale/trade in North Texas. Parts for sale or trade. Came out of 72 Chevy that had been wrecked. All prices are OBO or trade. Let me know what you have. I need 67 dr.fender and hood, rebuildable complete 350, tilt to fit my 67, pass fender for 81-87 Chevy truck. Let me know what you are willing to trade for parts you need, or want to buy. A/C dash, uncut radio area, $75 Rear window with weather stripping AND deluxe trim in-tact, $50 (tint scratched at each end at the bottom from removal) Small hump. I cut a huge piece so that you have enough to work with, $40 Would prefer parts picked up as shipping would be expensive. I can meet someone within reasonable mileage for a few bucks to cover diesel. I also have what is left of the cab, but no pictures of it yet. Floors are really nice except for right at the edge where the rocker begins. Firewall is also very good. If your is rusted at each end, you could use this. NO TITLE. Remaing cab section, (floor and firewall) $75. I can take pics of cab today if someone wants pics. Also have stock tank w/EEC if anyone needs one, $20. This truck was running when wrecked and has been stripped prior to me getting it. NO suspension parts. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-02-2005, 04:17 PM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	top __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-03-2005, 08:34 AM	#3
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	So nobody needs these parts?? __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-03-2005, 11:44 AM	#4
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	would like to see pictures of the cab also interested in the A/C dash, uncut radio area have to see if i have the money to spend first. Last edited by ivancito; 05-03-2005 at 11:47 AM.

05-03-2005, 11:46 AM	#5
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	I will take pictures of what is left tonight. I have cut the back of the cab to within 6 " of the floor. The hump has been cut, obviously, as well as the dash. The firewall and rest of the floor is there. The roof has been cut off as well. The area above the windshield is spoken for. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-03-2005, 11:49 AM	#6
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	thanks

05-03-2005, 11:51 AM	#7
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	how much to ship the dash? to hewitt TX 76643 Last edited by ivancito; 05-03-2005 at 11:51 AM.

05-03-2005, 11:53 AM	#8
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	would like the rear window also how much for shipping, or i might come and get the parts

05-03-2005, 12:03 PM	#9
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	What other parts for a 69 do you need? Let me know and I will make you a package deal on everything. Your avitar looks like a pretty slick truck so you may not need anything else I have. PM me and I will give you a price to take everything. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-03-2005, 12:28 PM	#10
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	avitar isnt mine, need a whole cab, mine has lots of rust, also looking for new rear end (axle and gears)

05-03-2005, 12:29 PM	#11
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	avitar is what i would like my tuck to be one day

05-03-2005, 12:30 PM	#12
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	almost forgot need driver door as well

05-03-2005, 01:01 PM	#13
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	If you don't mind the labor, you could graft in the good parts of this cab onto yours and have a much better platform to work from. I have a door or two, but they aren't much to talk about. I actually have an extra 69 cab and front clip and I have the title to it. But, like all of these trucks, it has rust. I also have a rear end still under the truck. It's a 6 lug under a 69. I'll make you a screaming deal if you come get the parts. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 05-03-2005 at 01:02 PM.

05-03-2005, 01:40 PM	#14
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	verry interested in the rear end, do you know what the gears are, if the truck was an automatic or not, etc... I am wanting highway gears, my truck is giving out way to many rpm's at 70mph and i can make getting the parts happen

05-03-2005, 02:04 PM	#15
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	I was told the rear end is a 3.08. The rear end out of the 72, has a 3.73, the 3.08 rear is what is in the 69 I bought for my son, so I'm told.... __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 05-04-2005 at 08:14 AM. Reason: more info



Register or Log In To remove these advertisements.

05-04-2005, 08:45 AM	#16
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	More pictures These are pictures of both the underside and inside of what is left of the cab. $50 picked up. Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-04-2005, 08:46 AM	#17
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	More pictures More pictures... Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-04-2005, 02:25 PM	#18
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

05-04-2005, 06:03 PM	#19
ivancito Registered User Join Date: Apr 2005 Location: Belton, TX Posts: 179	i sent you a PM, found somebody looking for those parts, cant find the time for that kind of drive, 5 hrs from where i live, but appreciate the time you gave. Hope selling the parts to yesterday chevy truck works out for you.

05-04-2005, 11:47 PM	#20
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	I have a hood off my 67. Some surface rust but no holes. Straight, no dents. $50 __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed Last edited by Inspector722; 05-04-2005 at 11:50 PM.

05-05-2005, 01:03 AM	#21
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	I am going to east texas the 21st Kilgore longview area for a wedding I can take some parts that far just let me know. __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

Register or Log In To remove these advertisements.