Blasting and powder coating North Tx? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 05-04-2005, 10:39 AM

Looking for location and approx price to have my 67 frame and susp part blasted and maybe powder coat everything. Is there anyplace North of Dallas that does it? Looking for name, quality and approx cost.

dallas71 · 05-04-2005, 04:03 PM

I have checked around and found that the price is between 350 and 500 alot, 350 with already sandblasted and 500 with sandblasting. I took a couple of parts to a place in Denton and they did a really good good. Fast and service was great. Name was National Crosslink Powder Coating Phone # (940) 891-3700. Check them out.

http://www.texascrosslink.com/

pat · 05-04-2005, 11:13 PM

I live about 5 minutes from that shop. Thought about bringin some parts in there to get done when the time comes.

Goplay2 · 05-05-2005, 12:47 AM

Quote:

Originally Posted by dallas71

I have checked around and found that the price is between 350 and 500 alot, 350 with already sandblasted and 500 with sandblasting. I took a couple of parts to a place in Denton and they did a really good good. Fast and service was great. Name was National Crosslink Powder Coating Phone # (940) 891-3700. Check them out.

http://www.texascrosslink.com/

go to crosslink in dallas off of i35 and walnut hill, they will make you a better deal/ 250. for coating and 165. to blast it.

Smokie55 · 05-05-2005, 09:43 AM

I have not used these guys but have seen their work. It was quality. they are located in Carrollton, TX.

Quality Powder Coating
2140 Hutton Dr. Suite 200
Carrollton, TX 75006
972-488-0635

05-04-2005, 10:39 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Blasting and powder coating North Tx? Looking for location and approx price to have my 67 frame and susp part blasted and maybe powder coat everything. Is there anyplace North of Dallas that does it? Looking for name, quality and approx cost. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 05-04-2005 at 10:39 AM.

05-04-2005, 04:03 PM	#2
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	I have checked around and found that the price is between 350 and 500 alot, 350 with already sandblasted and 500 with sandblasting. I took a couple of parts to a place in Denton and they did a really good good. Fast and service was great. Name was National Crosslink Powder Coating Phone # (940) 891-3700. Check them out. http://www.texascrosslink.com/ __________________ My 1966 LWB Truck My 1966 SWB Truck

05-04-2005, 11:13 PM	#3
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	I live about 5 minutes from that shop. Thought about bringin some parts in there to get done when the time comes. __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

05-05-2005, 09:43 AM	#5
Smokie55 Registered User Join Date: Oct 2002 Location: Wylie, TX Posts: 141	I have not used these guys but have seen their work. It was quality. they are located in Carrollton, TX. Quality Powder Coating 2140 Hutton Dr. Suite 200 Carrollton, TX 75006 972-488-0635 __________________ -- Will Evans -- 1955 Short Step "Sweet Pea" - Family heirloom. 1969 Suburban "Otis" - 396/TH400 - Dallas Ambulance - 1972 K5 blazer "Rusty" - 400/TH350/NP205 - Yeah it's big alright!! - Founding Member of Southern Bowties Club - Last edited by Smokie55; 05-05-2005 at 09:45 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.