|
05-09-2005, 06:28 PM
|
#1 |
|
User #12137
 
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
van tilt questions
i got a van tilt i am trying to put in my 67 ,is the splines on the end of the van tilt the same as a truck tilt ? and i need a intermediate shaft that is collapseable
i had one but i lost it  and is the intermediate shaft the same for 73 up ? 
|
|
|
|
05-09-2005, 08:02 PM
|
#2 |
|
Registered User
Join Date: Feb 2004
Location: Tacoma WA
Posts: 1,365
|
The 73 and up PU intermediate shaft and colum shaft are bigger diameter than the van tilt and 67-72 PU. I found this out the hard way - not costly but time wise.
__________________
67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow |
|
|
|
|
05-09-2005, 08:08 PM
|
#3 | |
|
User #12137
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
Quote:
|
|
|
|
|
|
05-09-2005, 08:30 PM
|
#4 |
|
User #12137
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
now will the a 67-72 truck intermediate shaft fit the van column?
|
|
|
|
|
05-09-2005, 09:29 PM
|
#5 |
|
Senior Member
Join Date: Jun 2000
Location: yucaipa ca
Posts: 580
|
the splines on van columns are the same as our trucks. i actually think when gm changed to a column with key in 73 they used up all the left over columns in the vans.
the only thing to look for is if the intermediate shaft is for standard or power steering. the splines on the boxes are different diameters. |
|
|
|
|
05-09-2005, 09:55 PM
|
#6 |
|
User #12137
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
i need to look for one thats power then i did the power steering swap back in the early 80s
 oh yea thanks |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
