FS - 72 cab/doors - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 05-08-2005, 10:17 PM

I had this sold to a local, but it has been sitting in my yard for about a year now and becoming evident I'll never get the rest of my money. Anyways, I bought the truck and it was from colorado or there-abouts. Above the windshield is good, good glass, rear slider, uncut dash, no speaker holes in doors, doors are pretty decent (driver has some small rust at the front corner), auto column, inside heater stuff, good seat, gas tank, and almost all repair sheetmetal (new panels include driver cab corner, driver floorpan, and both rockers). Cab needs slight rocker work on the passenger side, major rocker work on the driver side, some work on driver floorpan where driver rocker meets, and both cab corners. Cab mounts are fairly decent. They need a small amount of work to be real nice, but they aren't too bad. The cab also comes with a title for 72 cheyenne shortbed. $350 for this. The buyer also has the option to buy the rest. The rear was removed, but everything else is there. It has a new hitch, disc brakes (3/4 ton), power steering box, and auto crossmember (the truck is a 3/4 ton 2wd longbed). This would be $100 extra. If I don't have a buyer by Wed, I'm going to have to cut it up to get it out of the yard. Brian

Burnsman · 05-08-2005, 10:18 PM

more

Burnsman · 05-09-2005, 10:33 AM

ttt

67ChevyC10Stepside · 05-09-2005, 02:08 PM

did you ever find out about the shortbeds? i really need that harness...

Burnsman · 05-09-2005, 02:24 PM

Ernie, I have so much going on right now I forgot. If I remember right, you needed an engine harness for 67 chevy? It may be a few weeks before I get into another one. Brian

TP from Cntl PA · 05-09-2005, 09:16 PM

Are the bottoms of the doors rusted out? I only really need a set of decent doors...........I got a pile of them out back but they are all in need of attention.

Burnsman · 05-09-2005, 09:35 PM

The pass side is real nice. The driver side has some rust starting through on the front corner (see pic). Other than that, it is good. A pretty decent set of doors really. Brian

TP from Cntl PA · 05-09-2005, 09:38 PM

What is the going rate for them

Burnsman · 05-09-2005, 09:51 PM

$160/pr. No shipping.

nu2-72 · 05-09-2005, 09:56 PM

Dang Brian. I could really use that seat too.

67ChevyC10Stepside · 05-09-2005, 10:07 PM

you had that 69 short bed that i was gonna get the harness off of....you never got back to me though...that's what i was wondering.

Burnsman · 05-09-2005, 10:17 PM

Nu, I wished you lived closer so you could be the proud new owner! Ernie, I remmeber now. I've got 2 or 3 to get rid of in the next week or two. I'm going to take a break for a while, but I'll get it out in a few weeks.

05-08-2005, 10:17 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	FS - 72 cab/doors - Pa I had this sold to a local, but it has been sitting in my yard for about a year now and becoming evident I'll never get the rest of my money. Anyways, I bought the truck and it was from colorado or there-abouts. Above the windshield is good, good glass, rear slider, uncut dash, no speaker holes in doors, doors are pretty decent (driver has some small rust at the front corner), auto column, inside heater stuff, good seat, gas tank, and almost all repair sheetmetal (new panels include driver cab corner, driver floorpan, and both rockers). Cab needs slight rocker work on the passenger side, major rocker work on the driver side, some work on driver floorpan where driver rocker meets, and both cab corners. Cab mounts are fairly decent. They need a small amount of work to be real nice, but they aren't too bad. The cab also comes with a title for 72 cheyenne shortbed. $350 for this. The buyer also has the option to buy the rest. The rear was removed, but everything else is there. It has a new hitch, disc brakes (3/4 ton), power steering box, and auto crossmember (the truck is a 3/4 ton 2wd longbed). This would be $100 extra. If I don't have a buyer by Wed, I'm going to have to cut it up to get it out of the yard. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461 Last edited by Burnsman; 05-08-2005 at 10:54 PM.

05-08-2005, 10:18 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	more more Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-09-2005, 10:33 AM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	ttt ttt __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-09-2005, 02:08 PM	#4
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	did you ever find out about the shortbeds? i really need that harness... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-09-2005, 02:24 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	shortbeds Ernie, I have so much going on right now I forgot. If I remember right, you needed an engine harness for 67 chevy? It may be a few weeks before I get into another one. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-09-2005, 09:16 PM	#6
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Are the bottoms of the doors rusted out? I only really need a set of decent doors...........I got a pile of them out back but they are all in need of attention. __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

05-09-2005, 09:35 PM	#7
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	doors The pass side is real nice. The driver side has some rust starting through on the front corner (see pic). Other than that, it is good. A pretty decent set of doors really. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-09-2005, 09:38 PM	#8
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	What is the going rate for them __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

05-09-2005, 09:51 PM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	doors $160/pr. No shipping. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

05-09-2005, 09:56 PM	#10
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Dang Brian. I could really use that seat too. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

05-09-2005, 10:07 PM	#11
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	you had that 69 short bed that i was gonna get the harness off of....you never got back to me though...that's what i was wondering. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

05-09-2005, 10:17 PM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts Nu, I wished you lived closer so you could be the proud new owner! Ernie, I remmeber now. I've got 2 or 3 to get rid of in the next week or two. I'm going to take a break for a while, but I'll get it out in a few weeks. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.