Replacing Door glass/Vent window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bozracer · 05-09-2005, 10:39 PM

Any tricks to changing door glass and vent window assy?

4tiresngas · 05-10-2005, 01:01 AM

Bozracer, I'm certainly no expert, but I have done it a time or two. I would say everything hinges on the vent assembly. With the window lowered, remove the 3 outside screw on the vent and the 2 screws on the lower vent support arm. Then pull the top of the vent towrds the rear of the door. Once it moves towards the rear, just angle it towards the inside of the door and pull it all the way out. You will have to twist it. You can now move all the other parts around freely...window, regulator. Slide the window forward to remove it from the regulator...there are notched openings in the regulator track.

The installation is the reverse. Get the window in and get the regulator arms in the window glass track. If you do remove your regulator for any reason, be sure to put it back before putting the window glass back in.

After the window is in place. Install the vent window reverse ogf how you took it out. Get the 3 outside screws in first by just nudging the vent window around til you get the screws started. You can use a screw driver in one of the vent support arm screw holes to maneuver the arm and get the first screw started. Put those 2 screws in and you are pretty much done.

I just did this a week ago...guess I should have taken pics...sorry

**Palf70Step** · 05-10-2005, 05:44 AM

This may help. You can normally find alot in the FAQ section

http://67-72chevytrucks.com/vboard/s...d.php3?t=83475

http://67-72chevytrucks.com/vboard/s....php3?t=153937

LUV2XCLR8 · 05-10-2005, 04:21 PM

krue · 05-10-2005, 04:41 PM

That's right!

bozracer · 05-10-2005, 06:33 PM

Better believe it. Thanks,Guys

05-09-2005, 10:39 PM	#1
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	Replacing Door glass/Vent window Any tricks to changing door glass and vent window assy? __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed

05-10-2005, 01:01 AM	#2
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Bozracer, I'm certainly no expert, but I have done it a time or two. I would say everything hinges on the vent assembly. With the window lowered, remove the 3 outside screw on the vent and the 2 screws on the lower vent support arm. Then pull the top of the vent towrds the rear of the door. Once it moves towards the rear, just angle it towards the inside of the door and pull it all the way out. You will have to twist it. You can now move all the other parts around freely...window, regulator. Slide the window forward to remove it from the regulator...there are notched openings in the regulator track. The installation is the reverse. Get the window in and get the regulator arms in the window glass track. If you do remove your regulator for any reason, be sure to put it back before putting the window glass back in. After the window is in place. Install the vent window reverse ogf how you took it out. Get the 3 outside screws in first by just nudging the vent window around til you get the screws started. You can use a screw driver in one of the vent support arm screw holes to maneuver the arm and get the first screw started. Put those 2 screws in and you are pretty much done. I just did this a week ago...guess I should have taken pics...sorry __________________ Dan dan.brue@us.army.mil

05-10-2005, 05:44 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	This may help. You can normally find alot in the FAQ section http://67-72chevytrucks.com/vboard/s...d.php3?t=83475 http://67-72chevytrucks.com/vboard/s....php3?t=153937 __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-10-2005, 04:21 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-10-2005, 04:41 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	That's right! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-10-2005, 06:33 PM	#6
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	Better believe it. Thanks,Guys __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.