Valve cover adabtors! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sam's 72 · 04-13-2002, 05:00 PM

Has any one used these adabtors? They are for heads that use the center bolts, with these adabtors it will let you use the regular style valve covers. i was wanting to know how good they are.
sam

Jesse 67 c-10 · 04-13-2002, 09:02 PM

I considered those for my vortechs, untill I found a set of center bolt covers from a 90 capri, a taxi, for $5 cnd from a pick a part. There were lots to choose from in that yard and they even have a re-usable gasket. very solid, can't beat oem quality compared to cheap chromies, they fit on either head and I found that I actualy liked the look of black covers with a red block and aluminum manifold. Just an idea.
Jesse

------------------
Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse

Longhorn Man · 04-13-2002, 09:04 PM

There are some good looking alluminum ones made too.
I have heard nothign about the adapters though. Seen them used, but no claims on them or nothing.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Dean23 · 04-14-2002, 08:20 PM

I wouldnt use adapters chevy rockers leak enough with one gskt there nevr mind with 2 like you need with the adapters

------------------
Dean
edmonton,canada
68 c10, project in works,350, th350, plain jane.
SLOW AND STEADY GETS THE PANELS READY
http://communities.msn.ca/MyChevytruckpage

*racedvl* · 04-15-2002, 07:42 AM

I wouldn't use them just because there upward of $100 !!

------------------

http://hometown.aol.com/racedvl/racedvl69index.html

Woodstock,IL.northwest of Chicago

It's not what you buy, it's what you build!!

I did not climb to the top of the food chain, to become a vegetarian.

For some pics of my truck.

04-13-2002, 05:00 PM	#1
sam's 72 Senior Member Join Date: Nov 2001 Location: Pasadena, Texas, USA Posts: 1,005	Valve cover adabtors! Has any one used these adabtors? They are for heads that use the center bolts, with these adabtors it will let you use the regular style valve covers. i was wanting to know how good they are. sam __________________ 72 LWB chevy truck. Pasadena, Texas

04-13-2002, 09:02 PM	#2
Jesse 67 c-10 Registered User Join Date: Feb 2000 Location: Edmonton, Alberta, Canada Posts: 599	I considered those for my vortechs, untill I found a set of center bolt covers from a 90 capri, a taxi, for $5 cnd from a pick a part. There were lots to choose from in that yard and they even have a re-usable gasket. very solid, can't beat oem quality compared to cheap chromies, they fit on either head and I found that I actualy liked the look of black covers with a red block and aluminum manifold. Just an idea. Jesse ------------------ Near Saskatoon, Saskatchewan, Canada. 67 c-10, Long fleet, Newly swapped front disks, 5 lug rear end, 327 v-8 with Vortech heads, edlbrock performer rpm air gap manifold, 1406 carb and comp XE 256 cam. Backed by a getrag 5 speed and 1 piece driveshaft. Finnally running, almost driving! www.geocities.com/chevy67jesse __________________ Edmonton, Alberta, 67 c-10, Long fleet, front disks, 5 lug rear end, 327 with Vortechs, edlbrock manifold, comp cams XE 256, 600cfm carb. Backed by a getrag 5 speed and 1 piece driveshaft. 1993 Dihatsu Hijet Jumbo cab 4x4, currently converting to battery electric power.

04-14-2002, 08:20 PM	#4
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	I wouldnt use adapters chevy rockers leak enough with one gskt there nevr mind with 2 like you need with the adapters ------------------ Dean edmonton,canada 68 c10, project in works,350, th350, plain jane. SLOW AND STEADY GETS THE PANELS READY http://communities.msn.ca/MyChevytruckpage __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

04-13-2002, 09:04 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	There are some good looking alluminum ones made too. I have heard nothign about the adapters though. Seen them used, but no claims on them or nothing. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-15-2002, 07:42 AM	#5
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I wouldn't use them just because there upward of $100 !! ------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.