2wd coil spring help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72shadetree · 05-16-2005, 10:26 PM

72 front hd coils how much do i cut to get 3in drop and do i cut top or bottom.thanks

72BLAZERDUDE · 05-16-2005, 10:51 PM

Turn the spring over an cut 1 coil from the bottom. Dont be tempted to cut two. Cut it directly below where the original end of the spring is. that way it will sit back in the pocket correctly in the lower a-arm. One coil is a shorter spring but also able to support less weight so a smaller compressed height. One coil should be 2 1/2 - 3 inch drop.

72shadetree · 05-16-2005, 11:15 PM

thanks

05-16-2005, 10:26 PM	#1
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	2wd coil spring help 72 front hd coils how much do i cut to get 3in drop and do i cut top or bottom.thanks __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

05-16-2005, 10:51 PM	#2
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	Turn the spring over an cut 1 coil from the bottom. Dont be tempted to cut two. Cut it directly below where the original end of the spring is. that way it will sit back in the pocket correctly in the lower a-arm. One coil is a shorter spring but also able to support less weight so a smaller compressed height. One coil should be 2 1/2 - 3 inch drop. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

05-16-2005, 11:15 PM	#3
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	thanks __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.