Cheyenne Super badge placement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bram · 05-16-2005, 03:12 PM

I need some help. I have my Cheyenne badge mounted but I will have to drill new wholes for the Super badge. My question is what is the distance between the two? Around 1/8th inch?
Example

Bram · 05-16-2005, 08:45 PM

Anyone?

Castiron9 · 05-16-2005, 11:41 PM

Here's a picture of mine, hope this helps...........

Bram · 05-16-2005, 11:46 PM

Thanks I appreciate that.

**pjmoreland** · 05-17-2005, 12:46 AM

According the factory assembly manual, the left hole for the SUPER emblem is 1.09" directly below the left hole for the Cheyenne emblem. The right hole for the SUPER emblem is 4.15" directly to the right of the left SUPER hole. I drilled mine this way and it looks just like the picture Castiron9 posted. Also the left edges of the Cheyenne and the SUPER emblems are even with each other on both sides of the truck, so on the passenger side, the SUPER emblem is closer to the back of the truck and on the driver side, the super emblem is closer to the front of the truck.

powell72 · 05-17-2005, 12:50 AM

I notice some people make the mistake of putting the super emblem towards the back on the drivers side.

05-16-2005, 03:12 PM	#1
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Cheyenne Super badge placement I need some help. I have my Cheyenne badge mounted but I will have to drill new wholes for the Super badge. My question is what is the distance between the two? Around 1/8th inch? Example __________________ 72CheyenneSuper1ton4x4BigBlock

05-16-2005, 08:45 PM	#2
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Anyone? __________________ 72CheyenneSuper1ton4x4BigBlock

05-16-2005, 11:41 PM	#3
Castiron9 72 LONGHORN OWNER Join Date: Sep 2002 Location: Seattle Wash. Posts: 963	Here's a picture of mine, hope this helps........... Attached Images __________________ 72-SUPER CHEYENNE/20 LONGHORN 70-C/30 DUALLY Last edited by Castiron9; 05-16-2005 at 11:42 PM.

05-16-2005, 11:46 PM	#4
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Thanks I appreciate that. __________________ 72CheyenneSuper1ton4x4BigBlock

05-17-2005, 12:50 AM	#6
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	I notice some people make the mistake of putting the super emblem towards the back on the drivers side. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

05-17-2005, 12:46 AM	#5
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,011	According the factory assembly manual, the left hole for the SUPER emblem is 1.09" directly below the left hole for the Cheyenne emblem. The right hole for the SUPER emblem is 4.15" directly to the right of the left SUPER hole. I drilled mine this way and it looks just like the picture Castiron9 posted. Also the left edges of the Cheyenne and the SUPER emblems are even with each other on both sides of the truck, so on the passenger side, the SUPER emblem is closer to the back of the truck and on the driver side, the super emblem is closer to the front of the truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.