Quote:
|
Originally Posted by ss70l78
I have a 72 c-10 sw that had the springs cut all the around. I wanted to do it right so I put 2.5 drop spindles with stock springs up front and 4 inch drop springs with bell tech nitro lowered shocks in the rear. The stance now has a rake. I was under the impression it should be almost level. Any advice or comments would be appreciated.
|
Stock SWB half-ton measures 2.5" rake front to back, so you probably still have that extra inch... though that'd be hard to notice without a tape measure. Also, as
71swb4x4 mentions, you need to drive it around to get everything to seat.
05-17-2005, 06:43 PM
Hybrid Mode
