FS: Memphis, TN-two passenger doors & fleetside tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

diggerbob · 05-15-2005, 08:17 AM

I have the above items as well as some various and sundry stuff laying around in my garage. I got better parts on my '70 but these aint bad. Door bottoms are not rotted. I can't ship but anyone in the Bartlett/Memphis TN area who may need these parts can give 'em a looksie.

GMC AMI · 05-15-2005, 08:28 AM

PICS and prices would be nice!

DANL · 05-16-2005, 09:05 AM

Where are you located in Bartlett?

...Dan

UP GRADE · 05-16-2005, 11:25 AM

what shape is the tailgate.

diggerbob · 05-16-2005, 01:51 PM

I am in Rockyford Subdivision off of Old Brownsville Road.
Tailgate had a small crease in it at the top where someone backed into something while it was down. A little heat and a pull got it straightened out. I had removed paint down to metal and started smoothing it w/ bondo but then found a near perfect tailgate before priming and decided to use the new gate instead. The doors and the gate have only light surface rust as they have been in my garage for 2-3 years.

CHEVYE · 05-16-2005, 04:15 PM

pics......... and prices.......... please.

LUV2XCLR8 · 05-16-2005, 04:41 PM

^PARTS^WHORE^

CHEVYE · 05-16-2005, 04:55 PM

Quote:

Originally Posted by LUV2XCLR8

^PARTS^WHORE^

shhhhhhhh! i'm bout to put 20's on the 84 too. my buddy wants to lift his tahoe up and he said he'd trade me for my 15" billets so he can put 35's on em.

LUV2XCLR8 · 05-16-2005, 04:55 PM

Quote:

Originally Posted by CHEVYE

shhhhhhhh! i'm bout to put 20's on the 84 too. my buddy wants to lift his tahoe up and he said he'd trade me for my 15" billets so he can put 35's on em.

MAN O MAN DO YOU NEED HELP

CHEVYE · 05-16-2005, 05:04 PM

yeah, they tell me i'm a little

especially them dang women

. if i keep nick/nacking on these newer trucks i'm never gonna get my baby worked on.

diggerbob · 05-16-2005, 06:51 PM

This door is perfect on hinge side and bottom. Biggest flaw is that I had to drill and make a few pulls to get the door skin right. Pull holes are welded and skin is roughed in w/ thin layer of bondo. $100

diggerbob · 05-16-2005, 07:00 PM

This door's skin also got drilled, pulled and roughed in w/ dough. Bottom of door had a small rust spot from what I recall though it was welded and roughed in w/ dough. $75

diggerbob · 05-16-2005, 07:08 PM

Like the doors, this gate is rust free except for surface rust. All of these parts were treated w/ phosphouric acid and were shiny when I put them up. Several years in my garage has got them with just a bit of light surface rust.

Tailgate was the orignal on my truck before frame off. Appeared that someone backed into something with the gate down as there used to be a dimple the size of a quarter or so in the top. We drilled it, heated it and pulled it. Roughed in w/ bondo. $175

garthdader · 05-16-2005, 11:24 PM

Just out of curiosity, where did you get your parts dipped? In town, out of town? I am in atoka so I might be interested in a door. PM me if they are not sold.

GMC AMI · 05-17-2005, 05:31 AM

Thanks for the PICS, I will pass.

diggerbob · 05-17-2005, 09:09 PM

No problem Mike. Like I said when I started this thread, I wont ship. I wouldn't expect someone from Maine to drive down to West Tenn. to pick up a part.

GMC AMI · 05-18-2005, 05:37 AM

TTT for the digger. Tailgates are easy to ship via DHL or Fed-ex and may help you sell them quicker, good luck and have fun here.

05-15-2005, 08:17 AM	#1
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	FS: Memphis, TN-two passenger doors & fleetside tailgate I have the above items as well as some various and sundry stuff laying around in my garage. I got better parts on my '70 but these aint bad. Door bottoms are not rotted. I can't ship but anyone in the Bartlett/Memphis TN area who may need these parts can give 'em a looksie.

05-15-2005, 08:28 AM	#2
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	PICS and prices would be nice! __________________ 1968 Chevy 4x4 307 4 speed

05-16-2005, 09:05 AM	#3
DANL Senior Member Join Date: Mar 2002 Location: Bartlett, TN Posts: 348	Parts Where are you located in Bartlett? ...Dan

05-16-2005, 04:15 PM	#6
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	pics......... and prices.......... please. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

05-16-2005, 04:41 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	^PARTS^WHORE^ __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-16-2005, 11:25 AM	#4
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	what shape is the tailgate.

05-16-2005, 01:51 PM	#5
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	I am in Rockyford Subdivision off of Old Brownsville Road. Tailgate had a small crease in it at the top where someone backed into something while it was down. A little heat and a pull got it straightened out. I had removed paint down to metal and started smoothing it w/ bondo but then found a near perfect tailgate before priming and decided to use the new gate instead. The doors and the gate have only light surface rust as they have been in my garage for 2-3 years.

05-16-2005, 05:04 PM	#10
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	yeah, they tell me i'm a little especially them dang women . if i keep nick/nacking on these newer trucks i'm never gonna get my baby worked on. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

05-16-2005, 06:51 PM	#11
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	pics-door1 This door is perfect on hinge side and bottom. Biggest flaw is that I had to drill and make a few pulls to get the door skin right. Pull holes are welded and skin is roughed in w/ thin layer of bondo. $100 Attached Images

05-16-2005, 07:00 PM	#12
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	pics-door 2 This door's skin also got drilled, pulled and roughed in w/ dough. Bottom of door had a small rust spot from what I recall though it was welded and roughed in w/ dough. $75 Attached Images

05-16-2005, 07:08 PM	#13
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	tailgate Like the doors, this gate is rust free except for surface rust. All of these parts were treated w/ phosphouric acid and were shiny when I put them up. Several years in my garage has got them with just a bit of light surface rust. Tailgate was the orignal on my truck before frame off. Appeared that someone backed into something with the gate down as there used to be a dimple the size of a quarter or so in the top. We drilled it, heated it and pulled it. Roughed in w/ bondo. $175 Attached Images

05-16-2005, 11:24 PM	#14
garthdader Registered User Join Date: Sep 2002 Location: Atoka, Tn Posts: 64	Just out of curiosity, where did you get your parts dipped? In town, out of town? I am in atoka so I might be interested in a door. PM me if they are not sold. __________________ 1971 Chevy 6" superlift 35" xterrains 350 VORTEC crate

05-17-2005, 05:31 AM	#15
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Parts Thanks for the PICS, I will pass. __________________ 1968 Chevy 4x4 307 4 speed

05-17-2005, 09:09 PM	#16
diggerbob Registered User Join Date: Mar 2005 Location: Bartlett, TN (near Memphis) Posts: 202	No problem Mike. Like I said when I started this thread, I wont ship. I wouldn't expect someone from Maine to drive down to West Tenn. to pick up a part.

05-18-2005, 05:37 AM	#17
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	TTT for the digger. Tailgates are easy to ship via DHL or Fed-ex and may help you sell them quicker, good luck and have fun here. __________________ 1968 Chevy 4x4 307 4 speed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.