71-72 Front Bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUV2XCLR8 · 05-16-2005, 05:58 PM

Can someone measure from the outer edge of the parking light holes to
the center of the outer support bolt, I think I have a bad bumper, like a
idiot I ordered new outer supports because I thought mine were wrong,
instead it looks like the bumper is wrong, man I hate repop parts.

51 68CHEVY · 05-16-2005, 08:59 PM

Hi My Name Is Gary. I Measured My 72 It Is 6 In.5/16 In. From Outside Of Parkinglight Hole To Center Of Bolt Hole On Outer Bracket. Hope This Helps You Out. Gary

Huck · 05-18-2005, 07:41 PM

I bought a new bumper from GMC Paul 2 years ago. It too had the mounting holes for the signal lights in the wrong spots on one side. The light fit into the bumper but I had to drill new holes in the new chrome bumper. i sent a note on to Paul but never got a reply.~~~On any and all repop stuff, you have to play with it to get it to fit.

MikeS · 05-18-2005, 08:04 PM

Well....The Right side is 6 1/4 and the left side is 6 3/8. It's a repop. And now that I look at it the lights fit a little differently on each side.

LUV2XCLR8 · 05-18-2005, 08:29 PM

Quote:

Originally Posted by MikeS

Well....The Right side is 6 1/4 and the left side is 6 3/8. It's a repop. And now that I look at it the lights fit a little differently on each side.

mine measures the same as yours Mike, and my outer brackets (new) won't fit

MikeS · 05-18-2005, 08:56 PM

Perhaps you just need the right sized hammer?

05-16-2005, 05:58 PM	#1
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	71-72 Front Bumper Can someone measure from the outer edge of the parking light holes to the center of the outer support bolt, I think I have a bad bumper, like a idiot I ordered new outer supports because I thought mine were wrong, instead it looks like the bumper is wrong, man I hate repop parts. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-16-2005, 08:59 PM	#2
51 68CHEVY Registered User Join Date: Feb 2005 Location: ATCO N.J. Posts: 536	Hi My Name Is Gary. I Measured My 72 It Is 6 In.5/16 In. From Outside Of Parkinglight Hole To Center Of Bolt Hole On Outer Bracket. Hope This Helps You Out. Gary

05-18-2005, 07:41 PM	#3
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	I bought a new bumper from GMC Paul 2 years ago. It too had the mounting holes for the signal lights in the wrong spots on one side. The light fit into the bumper but I had to drill new holes in the new chrome bumper. i sent a note on to Paul but never got a reply.~~~On any and all repop stuff, you have to play with it to get it to fit.

05-18-2005, 08:04 PM	#4
MikeS Active Member Join Date: Jun 2000 Location: Pottstown, PA Posts: 197	Well....The Right side is 6 1/4 and the left side is 6 3/8. It's a repop. And now that I look at it the lights fit a little differently on each side.

05-18-2005, 08:56 PM	#6
MikeS Active Member Join Date: Jun 2000 Location: Pottstown, PA Posts: 197	Perhaps you just need the right sized hammer?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.