Info - 10 K Lb Pto Driven Winch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PETEM1957 · 05-17-2005, 11:45 AM

Any One Have Info On Possibly Dealer Installed 10,000 Pound Pto Driven Winches. It Is On A 1970 3/4 To P/u. There Is A Visor Sticker On The Vehicle. I'm Going To Go Through It Clean & Lube Everthing Up Before I Try To Run It. Seems Original?

Americanrider · 05-18-2005, 03:49 AM

That sounds like a rare bird. What brand of winch, Braden, Garwood or Koenig? Can you post up some pics of this?

4x4Poet · 05-18-2005, 04:18 AM

Hooray, Pete! I've been waiting for someone to post on factory PTOs.

1. How much does it weigh?
2. How far does its mount protrude from the front?
3. Where is the PTO powered from: Transmission or NP205?

TIA.

**JIMs70GMC** · 05-18-2005, 04:52 AM

With the search down, we had a real nice thead w/ pics of ptos, I can only guess it was with in the past 6-8 months. Toolpimp has an NP205 mounted pto for a fertilizer attachment on his truck I believe. Rod also has info on these ptos, might want to post on the 67-72 message board also for more views.
That being said, we need some pics!

BobS · 05-19-2005, 12:00 AM

I was still subscribed to it.

http://67-72chevytrucks.com/vboard/s....php3?t=124560

Bob

Mudder · 05-19-2005, 01:07 AM

Gonna try to get that thread moved over here. It needs to be in the area.

**special-K** · 05-19-2005, 07:05 AM

Does it have an ID tag?Could also be a Ramsey.I`ve seen parts listed in the 46-72 parts book.

PETEM1957 · 05-25-2005, 09:08 AM

I am unable To do pics at present. It is a Chelsea trans mounted PTO and it does have the metal tag still attached to PTO. It all looks Factory/dealer Installed. It is complete including, Winch Bumper And Yellow Operation Sticker On D/S Visor. I'm going to try & get it working. Dash pull cable is frozen, will work on that first, lube It up & give it a try.

BobS · 05-25-2005, 09:26 AM

Does it look like this one?

Bob

05-17-2005, 11:45 AM	#1
PETEM1957 Junior Member Join Date: Mar 2005 Location: Albuquerque, NM Posts: 275	Info - 10 K Lb Pto Driven Winch Any One Have Info On Possibly Dealer Installed 10,000 Pound Pto Driven Winches. It Is On A 1970 3/4 To P/u. There Is A Visor Sticker On The Vehicle. I'm Going To Go Through It Clean & Lube Everthing Up Before I Try To Run It. Seems Original?

05-18-2005, 04:18 AM	#3
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Hooray, Pete! I've been waiting for someone to post on factory PTOs. 1. How much does it weigh? 2. How far does its mount protrude from the front? 3. Where is the PTO powered from: Transmission or NP205? TIA. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

05-18-2005, 04:52 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	With the search down, we had a real nice thead w/ pics of ptos, I can only guess it was with in the past 6-8 months. Toolpimp has an NP205 mounted pto for a fertilizer attachment on his truck I believe. Rod also has info on these ptos, might want to post on the 67-72 message board also for more views. That being said, we need some pics! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-19-2005, 12:00 AM	#5
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	I was still subscribed to it. http://67-72chevytrucks.com/vboard/s....php3?t=124560 Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

05-19-2005, 07:05 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Does it have an ID tag?Could also be a Ramsey.I`ve seen parts listed in the 46-72 parts book. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-18-2005, 03:49 AM	#2
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	That sounds like a rare bird. What brand of winch, Braden, Garwood or Koenig? Can you post up some pics of this?

05-19-2005, 01:07 AM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Gonna try to get that thread moved over here. It needs to be in the area.

05-25-2005, 09:08 AM	#8
PETEM1957 Junior Member Join Date: Mar 2005 Location: Albuquerque, NM Posts: 275	Chelsea Pto Winch I am unable To do pics at present. It is a Chelsea trans mounted PTO and it does have the metal tag still attached to PTO. It all looks Factory/dealer Installed. It is complete including, Winch Bumper And Yellow Operation Sticker On D/S Visor. I'm going to try & get it working. Dash pull cable is frozen, will work on that first, lube It up & give it a try. Last edited by PETEM1957; 05-25-2005 at 09:15 AM.

05-25-2005, 09:26 AM	#9
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	Does it look like this one? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.