PARTS YARD SALE Myrtle Beach S.C. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67mbsc · 04-28-2005, 11:15 PM

Chevy Yard Sale!!!!
I'VE DROPPED THE PRICES!!!!!
I have these parts for sale. NO shipping, my health prohibits me lifting anything, so please don’t ask me to. Sorry about that, but it’s a good reason for you to see Myrtle Beach. Myrtle Beach Bike Week starts on MAY 13!!!!
These are the ONLY parts I’m selling right now. Whoever can use all of this, I’ll make you a SUPER deal on it all. I need cash badly!!!!

67 small window cab GMC WITH Title. Needs some floor repair, not really the whole panel. Also should have right cab corner. NO glass, no doors. GOOD roof. Definitely a good ole’ Southern truck. $125.00
GMC frame SWB, with suspension, NO differential. With Bill Of Sale, OR with title if you buy the cab, too. This was a LWB, has been professionally cut and re-welded, ready to go. $100.00 BUY THE CAB WITH FRAME FOR $150.00
Front Fenders. I have one driver’s side, REALLY clean. $100 Also one driver’s, hit in front, back half is very usable $25
Passenger side, one with spots in rear and decent front, one with good rear and fair front. $40 each
Stepside Fenders. CLEAN, CLEAN, CLEAN. Minor surface rust at flanges, that’s it. NO tire cut out. $400 for the pair and you won’t find nicer. I really don’t want to break the pair.
Stepside Steps. Clean. $35 for the pair
Step side step brackets $30 pr.
67 Grille nice, no chrome. $75
67 Hood. Surface rust on the top, the front flange underneath has some rust at the very edge. That’s all. This hood is very usable. $50
67 Front Painted Bumper. Did have some pulling at a couple of the bolt holes, I straightened that out., Looks good. $40
67 Rear Step Bumper. Has four drilled holes from a bumper hitch. Nice. $40
67-72 Doors: One or two of each side: NO glass or regs
Drivers, needs bottom; $40
Passenger side, should have lower edge of skin; $40
Stepside rear lights with brackets. Complete with housings and lenses. $50 set
Bedsides. Long wheelbase Stepside: One side real nice, other side has one rusted area, but very usable. $125 both
Bench Seat. Black, but vinyl needs recovered. Seat Frame is very good and so is the padding. I may have to keep the track. $25
Inner fenders: Left side real good. $75
Right side bad at the front edge but repairable; $40
Gas tank. Has one corner patched with what appears to be fiberglass. Does NOT leak. Without sender, I need that for spare. $35
307 engine, complete less carb. and distributor. Supposed to be a good runner. Year unknown $125
I can’t figure out how to post pics, so if you need pics of a certain part, please e-mail me and I’ll do my best, but please be patient, I have serious back troubles right now..
Mv1204@sccoast.net

**special-K** · 04-29-2005, 08:08 AM

I saw your bed for sale earlier.And,your offer to add cab for a little more to sweeten the deal.I am very interested,but I`ve got two trips to pick up parts(NJ & VA)I`m tryin` to make time for.I was hoping to catch your deal next(if still available).But,if anyone else wants to jump on this,go for it.If it`s still around later,you have a buyer.

67mbsc · 04-29-2005, 07:20 PM

Special-K, I left ya a PM. Let me know what yall think!!!!!

67mbsc · 04-30-2005, 07:33 PM

I've dropped my prices, look at the offer on the cab and frame! I need them gone so I can have my car trailer empty!
Thanks

LUV2XCLR8 · 04-30-2005, 07:36 PM

Wow, Good Deals, And Good Luck

doc70sub · 05-03-2005, 08:34 PM

Still have the cab? I can come this week-end....
Thanks!
Doc

67mbsc · 05-03-2005, 09:13 PM

Hey!
Yes, I still have it, and I will be home this weekend, for the most part! PM me and we can exchange info. Thanks

greenefamily · 05-04-2005, 11:12 PM

like to have cab if doc doesent

67mbsc · 05-05-2005, 12:13 AM

Greenefamily, check back with me on Monday. Thanks

67mbsc · 05-05-2005, 10:10 AM

Greenefamily; Doc says he can't make it, so it's yours if you're still wanting the cab. I PM'd yall.

71meangreenc10 · 05-05-2005, 07:40 PM

can you pm me your address for a mapquest?

67mbsc · 05-17-2005, 07:09 AM

I've tried and tried to post the cab pics but no luck!!!! I do have some pics now for anybody interested, the cab and frame are still FOR SALE and most other parts, too !!!!
If you want pics, please e-mail me at:
mv1204@sccoast.net
Thanks

67mbsc · 05-18-2005, 10:14 PM

Guys,
I'm sorry, but this is the only way I know of to get yall some pics! You may have to copy and paste the links to get em.
Thanks,

http://img.photobucket.com/albums/v7...uck/67cab2.jpg

http://img.photobucket.com/albums/v7...uck/67cab4.jpg

http://img.photobucket.com/albums/v7...k/e407a384.jpg

http://img.photobucket.com/albums/v7...uck/67cab1.jpg

http://img.photobucket.com/albums/v7...cabcorner3.bmp

http://img.photobucket.com/albums/v7...k/78a71d6b.jpg

http://img.photobucket.com/albums/v7...k/3a3b2ca7.jpg

67mbsc · 05-25-2005, 12:45 AM

Hey!
I'm going to be going to Cleveland, Ohio Friday, from South Carolina. I can take some parts and pieces with me if anybody's interested. Thanks

Biggin88 · 05-25-2005, 03:02 AM

You say the ol 307 runs, does it comes with any acc,intake,exhaust,ignition?
Do you know if it will bolt into a '72 that is presently 250 l6 three on the tree

67mbsc · 05-25-2005, 08:47 AM

BIGGIN88;
The engine has the heads off right now. It comes with the heads, intake,no carb or distributor. No other accessories or brackets.
I'm certain it will bolt rite in, just like my 400 did, very easy!
I'll need to know if you want it no later than Thursday AM to get it loaded.
Thanks

"You say the ol 307 runs, does it comes with any acc,intake,exhaust,ignition?
Do you know if it will bolt into a '72 that is presently 250 l6 three on the tree"

67mbsc · 05-25-2005, 04:37 PM

67stepside, my mail box is cleared now, I PM's Yall!

04-28-2005, 11:15 PM	#1
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	PARTS YARD SALE Myrtle Beach S.C. Chevy Yard Sale!!!! I'VE DROPPED THE PRICES!!!!! I have these parts for sale. NO shipping, my health prohibits me lifting anything, so please don’t ask me to. Sorry about that, but it’s a good reason for you to see Myrtle Beach. Myrtle Beach Bike Week starts on MAY 13!!!! These are the ONLY parts I’m selling right now. Whoever can use all of this, I’ll make you a SUPER deal on it all. I need cash badly!!!! 67 small window cab GMC WITH Title. Needs some floor repair, not really the whole panel. Also should have right cab corner. NO glass, no doors. GOOD roof. Definitely a good ole’ Southern truck. $125.00 GMC frame SWB, with suspension, NO differential. With Bill Of Sale, OR with title if you buy the cab, too. This was a LWB, has been professionally cut and re-welded, ready to go. $100.00 BUY THE CAB WITH FRAME FOR $150.00 Front Fenders. I have one driver’s side, REALLY clean. $100 Also one driver’s, hit in front, back half is very usable $25 Passenger side, one with spots in rear and decent front, one with good rear and fair front. $40 each Stepside Fenders. CLEAN, CLEAN, CLEAN. Minor surface rust at flanges, that’s it. NO tire cut out. $400 for the pair and you won’t find nicer. I really don’t want to break the pair. Stepside Steps. Clean. $35 for the pair Step side step brackets $30 pr. 67 Grille nice, no chrome. $75 67 Hood. Surface rust on the top, the front flange underneath has some rust at the very edge. That’s all. This hood is very usable. $50 67 Front Painted Bumper. Did have some pulling at a couple of the bolt holes, I straightened that out., Looks good. $40 67 Rear Step Bumper. Has four drilled holes from a bumper hitch. Nice. $40 67-72 Doors: One or two of each side: NO glass or regs Drivers, needs bottom; $40 Passenger side, should have lower edge of skin; $40 Stepside rear lights with brackets. Complete with housings and lenses. $50 set Bedsides. Long wheelbase Stepside: One side real nice, other side has one rusted area, but very usable. $125 both Bench Seat. Black, but vinyl needs recovered. Seat Frame is very good and so is the padding. I may have to keep the track. $25 Inner fenders: Left side real good. $75 Right side bad at the front edge but repairable; $40 Gas tank. Has one corner patched with what appears to be fiberglass. Does NOT leak. Without sender, I need that for spare. $35 307 engine, complete less carb. and distributor. Supposed to be a good runner. Year unknown $125 I can’t figure out how to post pics, so if you need pics of a certain part, please e-mail me and I’ll do my best, but please be patient, I have serious back troubles right now.. Mv1204@sccoast.net Last edited by 67mbsc; 04-30-2005 at 07:30 PM. Reason: Price Drop

04-29-2005, 08:08 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I saw your bed for sale earlier.And,your offer to add cab for a little more to sweeten the deal.I am very interested,but I`ve got two trips to pick up parts(NJ & VA)I`m tryin` to make time for.I was hoping to catch your deal next(if still available).But,if anyone else wants to jump on this,go for it.If it`s still around later,you have a buyer. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-29-2005, 07:20 PM	#3
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Special-K Special-K, I left ya a PM. Let me know what yall think!!!!!

04-30-2005, 07:33 PM	#4
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Lowered Prices I've dropped my prices, look at the offer on the cab and frame! I need them gone so I can have my car trailer empty! Thanks

04-30-2005, 07:36 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Wow, Good Deals, And Good Luck __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-03-2005, 08:34 PM	#6
doc70sub Registered User Join Date: Dec 2000 Location: Thomasville, NC Posts: 669	Still have the cab? I can come this week-end.... Thanks! Doc __________________ 1970 Sub C-10 - 350/TH-350/3.73 12-bolt Came home from the hospital in it & mine ever since. 1966 Catalina Ventura 2-door fastback 389/TH400

05-03-2005, 09:13 PM	#7
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Yard Sale Myrtle Beach Hey! Yes, I still have it, and I will be home this weekend, for the most part! PM me and we can exchange info. Thanks

05-04-2005, 11:12 PM	#8
greenefamily Registered User Join Date: Apr 2005 Location: lexington Posts: 51	like to have cab if doc doesent

05-05-2005, 12:13 AM	#9
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Cab Greenefamily, check back with me on Monday. Thanks

05-05-2005, 10:10 AM	#10
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Greenefamily: Greenefamily; Doc says he can't make it, so it's yours if you're still wanting the cab. I PM'd yall.

05-05-2005, 07:40 PM	#11
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	can you pm me your address for a mapquest? __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

05-17-2005, 07:09 AM	#12
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Cab Pics I've tried and tried to post the cab pics but no luck!!!! I do have some pics now for anybody interested, the cab and frame are still FOR SALE and most other parts, too !!!! If you want pics, please e-mail me at: mv1204@sccoast.net Thanks

05-18-2005, 10:14 PM	#13
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Links For Pics: Guys, I'm sorry, but this is the only way I know of to get yall some pics! You may have to copy and paste the links to get em. Thanks, http://img.photobucket.com/albums/v7...uck/67cab2.jpg http://img.photobucket.com/albums/v7...uck/67cab4.jpg http://img.photobucket.com/albums/v7...k/e407a384.jpg http://img.photobucket.com/albums/v7...uck/67cab1.jpg http://img.photobucket.com/albums/v7...cabcorner3.bmp http://img.photobucket.com/albums/v7...k/78a71d6b.jpg http://img.photobucket.com/albums/v7...k/3a3b2ca7.jpg

05-25-2005, 12:45 AM	#14
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Going North! Hey! I'm going to be going to Cleveland, Ohio Friday, from South Carolina. I can take some parts and pieces with me if anybody's interested. Thanks

05-25-2005, 03:02 AM	#15
Biggin88 Registered User Join Date: Jul 2004 Location: Timmonsville SC Posts: 23	You say the ol 307 runs, does it comes with any acc,intake,exhaust,ignition? Do you know if it will bolt into a '72 that is presently 250 l6 three on the tree __________________ 89 GMC Jimmy 61 F500(yup,I married into a F@$d family)



Register or Log In To remove these advertisements.

05-25-2005, 08:47 AM	#16
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	Biggin88 BIGGIN88; The engine has the heads off right now. It comes with the heads, intake,no carb or distributor. No other accessories or brackets. I'm certain it will bolt rite in, just like my 400 did, very easy! I'll need to know if you want it no later than Thursday AM to get it loaded. Thanks "You say the ol 307 runs, does it comes with any acc,intake,exhaust,ignition? Do you know if it will bolt into a '72 that is presently 250 l6 three on the tree"

05-25-2005, 04:37 PM	#17
67mbsc Senior Member Join Date: Jan 2005 Location: Myrtle Beach, South Carolina Posts: 266	67c10stepside 67stepside, my mail box is cleared now, I PM's Yall!

Register or Log In To remove these advertisements.