side glass replacement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scooter67 · 05-27-2005, 10:46 AM

How do you get the old glass out of the metal channel at the bottom?

How do you secure the new glass back into the channel?

BobbyK · 05-27-2005, 10:51 AM

I clamped the metal channel in a vise and slowly worked the glass back and forth.
The only thing holding it in is a rubber gasket(press fit type of deal)
Work slow and it will come out.

Scooter67 · 05-27-2005, 10:56 AM

Quote:

Originally Posted by BobbyK

I clamped the metal channel in a vise and slowly worked the glass back and forth.
The only thing holding it in is a rubber gasket(press fit type of deal)
Work slow and it will come out.

I'm thinking maybe laquer thinner or something would soften the old rubber, hopefully.

BobbyK · 05-27-2005, 10:58 AM

wouldn't hurt.

flip66 · 05-27-2005, 02:42 PM

anybody know how to get it back in

BobbyK · 05-27-2005, 04:14 PM

I turned the glass upside down and useing a deadblow hammer tapped the channel back onto the glass.

05-27-2005, 10:46 AM	#1
Scooter67 Registered User Join Date: Jan 2005 Location: middle TN Posts: 87	side glass replacement How do you get the old glass out of the metal channel at the bottom? How do you secure the new glass back into the channel? __________________ Here's my '67 stepside www.truckwithaheart.com

05-27-2005, 10:51 AM	#2
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	I clamped the metal channel in a vise and slowly worked the glass back and forth. The only thing holding it in is a rubber gasket(press fit type of deal) Work slow and it will come out. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

05-27-2005, 10:58 AM	#4
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	wouldn't hurt. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

05-27-2005, 02:42 PM	#5
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	anybody know how to get it back in __________________ 1998 Pontiac Grad Prix GTP 1969 C10 396 TH400 3.08 posi

05-27-2005, 04:14 PM	#6
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,771	I turned the glass upside down and useing a deadblow hammer tapped the channel back onto the glass. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.