Found a possible free parts truck. 69/70 C20 w/ dual wheels. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged91 · 05-24-2005, 07:52 PM

Like it says, I found a 69 or 70 C20 Deluxe today. It has a flatbed/stakebody on it. It is a coil spring rear with the helper leafs with dual rear wheels and I am guessing with that conversion(listed as a conversion on glove box) it also got the C30 front suspension? Anyway, the owner's wife said she thinks her husband is scrapping the truck and would probably let me take whatever I want off of it for free or next to nothing(he needed the motor). I was going to go after the helper leafs and the trans hump, motor mount towers, guage cluster(no tach), heater controls and some other stupid crap. Anything else I should look for that is of value? The sheetmetal is trash. Rotted and not one panel is straight.

LUV2XCLR8 · 05-24-2005, 07:55 PM

Member "Da Burb" is looking for some 4" drums for his motorhome, if it
is possibly a c-30 it might have what he needs, check parts board for
pictures to verify, he has been looking for a couple of weeks I know

Longhorn Man · 05-24-2005, 08:14 PM

Won't be C/30 stuff....coils. No one tons were made with coils. It puts too much pressure in too small a location on the frame. The leafs distribute the weight over a larger area.
If the trailing arms are good, they are a good upgrade to a 1/2 ton.
The helper springs are probably worth something.
Depending on gears, the rear may be worth pulling. (4:10 or better)

GMC AMI · 05-25-2005, 05:47 AM

Free Is Free!

**'68OrangeSunshine** · 05-25-2005, 06:03 AM

Radio Delete Plate?

bagged91 · 05-25-2005, 08:30 PM

68OrangeSunshine : I put one of my radio deletes up on the parts board. Here's a link to it. http://67-72chevytrucks.com/vboard/s....php3?t=157262

Turns out a bodyshop bought the truck. I know the owner of the bodyshop so I still may have a chance at some of the stuff....

**'68OrangeSunshine** · 05-26-2005, 05:26 AM

I thank you for the courtesy of a swift reply, however I really don't need one that bad. I would hate to cut a perfect mint condition Dana PTO warning specimen just to make a face plate for a cassette deck. That one's a piece of history.

bagged91 · 05-27-2005, 04:15 PM

I'lle keep my eye out for you. I have one around here somewhere that needs some TLC.

**'68OrangeSunshine** · 05-28-2005, 06:09 AM

OK, Thanks.

05-24-2005, 07:52 PM	#1
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Found a possible free parts truck. 69/70 C20 w/ dual wheels. Like it says, I found a 69 or 70 C20 Deluxe today. It has a flatbed/stakebody on it. It is a coil spring rear with the helper leafs with dual rear wheels and I am guessing with that conversion(listed as a conversion on glove box) it also got the C30 front suspension? Anyway, the owner's wife said she thinks her husband is scrapping the truck and would probably let me take whatever I want off of it for free or next to nothing(he needed the motor). I was going to go after the helper leafs and the trans hump, motor mount towers, guage cluster(no tach), heater controls and some other stupid crap. Anything else I should look for that is of value? The sheetmetal is trash. Rotted and not one panel is straight. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

05-24-2005, 07:55 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Member "Da Burb" is looking for some 4" drums for his motorhome, if it is possibly a c-30 it might have what he needs, check parts board for pictures to verify, he has been looking for a couple of weeks I know __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-25-2005, 05:47 AM	#4
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Free Is Free! __________________ 1968 Chevy 4x4 307 4 speed

05-25-2005, 06:03 AM	#5
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,188	Radio Delete Plate? __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-25-2005, 08:30 PM	#6
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	68OrangeSunshine : I put one of my radio deletes up on the parts board. Here's a link to it. http://67-72chevytrucks.com/vboard/s....php3?t=157262 Turns out a bodyshop bought the truck. I know the owner of the bodyshop so I still may have a chance at some of the stuff.... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" Last edited by bagged91; 05-25-2005 at 08:31 PM.

05-24-2005, 08:14 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Won't be C/30 stuff....coils. No one tons were made with coils. It puts too much pressure in too small a location on the frame. The leafs distribute the weight over a larger area. If the trailing arms are good, they are a good upgrade to a 1/2 ton. The helper springs are probably worth something. Depending on gears, the rear may be worth pulling. (4:10 or better)

05-26-2005, 05:26 AM	#7
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,188	Thanks Anyway I thank you for the courtesy of a swift reply, however I really don't need one that bad. I would hate to cut a perfect mint condition Dana PTO warning specimen just to make a face plate for a cassette deck. That one's a piece of history. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-27-2005, 04:15 PM	#8
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	I'lle keep my eye out for you. I have one around here somewhere that needs some TLC. __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

05-28-2005, 06:09 AM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,188	OK, Thanks. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.