What did you get done? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 06-05-2005, 07:12 PM

I worked this weekend so I couldn't get much done. I did spend Saturday morning getting a few things done before I hit the road. I cleaned my utility shed out and threw away 5-6 bags of trimmings. I keep all the pool supplies and floats in there and it was getting out of hand. Now it's nice and organized. That will last until my daughters friends from church show up tonight.
Beyond that I washed trucks and cleaned my garage a little. The rest of the weekend was spent on the road.

What did you get done...

cliffsta · 06-05-2005, 07:31 PM

For once i got stuff done!! My cousin tinted my windows, i just gotta put my vent window handles back on. I also got my grille in, i just gotta polish it (when it stops raining). Housewise, i did my standard chores, ran the roads, random teenage B.S.

**old Rusty C10** · 06-05-2005, 07:43 PM

i didnt do a thing truck related this weekend i had to go car shopping on saturday to replace the minivan for my ex wife she bought another dodge

but anyway saturday night i went out and today i recovered

1974gmc · 06-05-2005, 08:06 PM

replaced fuel sending unit and put new steps on my box

mistershadow808 · 06-05-2005, 09:11 PM

took my old exhaust off...put my new exhaust on(took me forever to get the bends...seeing as how i was using bends that i got out of the dumpster of an exhaust shop). once i finished that(which took all of friday night,saturday, and sunday afternoon), i mowed the lawn like a good kid.

72 CustomCamper · 06-05-2005, 09:13 PM

Spent all day today 6/5/05 replacing the drivers side ball joints on my K/10. Man that steering arm is a royal PITA to get off. I still have to do the pass side tomorrow and install 2 cat converters and get it reinspected. Fun fun fun...

Chuck

**lolife99** · 06-05-2005, 09:35 PM

I actually did something truck related. I replaced my broken exhaust manifold on the blazer and changed the plugs. I know, I know,... not much. First truck stuff in a long time for me. Also cleaned the wife's Avalanche and worked around the house.

87 Shortwide · 06-05-2005, 11:56 PM

Installed an A/C unit in the front garage
Cleaned up the garage a bit
Made the weekend visit to the chassis shop to BS about cars and whatnot
Finished up the final touches on my firewall filler panel, it's ready to attach and fill now
Went to look at a car lift, then my brother bought it, have to go pick it up this week
Changed plugs, ignition module, cap, rotor, and coil in the blazer to try to chase down an idle problem (still not working right)
bought a new toolbox for work and put it together
Helped a friend install control arm bushings in his car (I had a press, he didn't)
I think that's about it...

ElGracho · 06-06-2005, 01:29 AM

I traded my Indy Hauler for a Wurlitzer Jukebox (much easier to store...). I completely rearranged a warehouse full of pinball machines and video games and made enough room to fit two cars in it.

After that, I drove a big truck back up here so I can move out of the shop I've been renting for three years. I'm looking for a place to buy and build a shop, but I need to get out of this one.

SCOTI · 06-06-2005, 07:52 AM

Nothing for my 74 . . ..... but for the 68 I degreased the power steering pump/brackets I bought last week from fellow board member 'wlarue'. I'm trying to get all the accessories ready for their professional rattle can job. I still have to make or find the trans c-member & then will install the 350/350 into the beater.

I also picked up the bedsides for my beater from S.O.S so they wouldn't be tripping over them anymore.

86 GMG · 06-06-2005, 08:32 AM

absolutly nothing truck related but friday night i cleaned out two pig trofts of my mother inlaws made $100.00. sat. and sun. two friends and I laid 1600 sq. ft. of vct in a jewish school that was a little strange. oh yea a beat my dog for tearing up the house i think he was feeling lonely so he thought he would make me stay there and clean his mess up and not leave (just kidding about the beating part) sunday night i had to pick up a lot of tree limbs in the yard qwe had winds up to 90 mph in some spots of town.

mingoman · 06-06-2005, 10:45 AM

I had to work night shift this weekend so my days off starts today. I have an old Tram cb that I replaced the caps and tubes in awhile back so yesterday I let it run most of the day then peaked and tuned it. Today I'll paint my shop ceiling white.

Earl Filter · 06-06-2005, 11:03 AM

Brakes! Master cylinder, front calipers, hoses. Rear wheel cylinders still leaking. That's next weekend.

Izzy · 06-06-2005, 12:13 PM

Nothing truck related.

Moved more stuff and got about 90% of our old house moved to storage.

TC70C10 · 06-06-2005, 01:30 PM

Got the A/C swapped to 134 in the 85 K5, then the heater core started leaking

, replaced rear drive shaft u-joints, then headed to the junkyard and picked up a dash bezel(for spare), heater control assembly for the 81K5, and a window regulator for the 70 C-10. Hit Advance autoparts on the way home and picked up 100 bucks worth of stuff. Replaced the fuel filter, wires and heater core on the 85 Saturday afternoon. Sunday cut grass and went to Star Wars movie. good fun. oh yeah, drank me some beeeeers...

phantom dually · 06-06-2005, 10:26 PM

Got my narrowed rearend back home. Time to start painting!! Did a brake job on a co workers car Friday. Saturday I spent part of the day with my dad helping my brother move. Sunday had a softball league game as usual. Pretty good weekend but no real truck progress.

Justins76 · 06-06-2005, 11:14 PM

I tore the column apart and replaced the turn signal switch & lever and cleaned the steering wheel.

andrew king · 06-07-2005, 12:18 AM

Sold my trusty old 82 chevy 1/2 ton. Some old guy was walking by and offered me $3000.00 for it so an hour later he drove it home lol. At least I still have my crew cab and 3000 to put into it lol

Moostifer · 06-07-2005, 10:17 AM

friday nite I put a Performer RPM intake on a friend's '76 T.A. that was the easiest intake swap I have ever done! didn't have to pull the dist. or worry about gunk falling down into the lifter valley!

Sat went riding around with a friend in his newly aquired Ford stang SVT convertable. I'm not much on fords, but Dang that car is Suweet! and FAST!

Sunday- played a round of golf (my newest bad habit)... installed a Barry Grant 220 fuel pump and the fuel cell I made at work last week, installed the new back window that came in from L.M.C, never did like the sliding rear window......

sargentjones · 06-07-2005, 10:37 AM

I spent most of my time tryin to get this damn cowl on my hood. Lots of sandin, lots of sandin...

06-05-2005, 07:12 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? I worked this weekend so I couldn't get much done. I did spend Saturday morning getting a few things done before I hit the road. I cleaned my utility shed out and threw away 5-6 bags of trimmings. I keep all the pool supplies and floats in there and it was getting out of hand. Now it's nice and organized. That will last until my daughters friends from church show up tonight. Beyond that I washed trucks and cleaned my garage a little. The rest of the weekend was spent on the road. What did you get done... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-05-2005, 07:31 PM	#2
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	For once i got stuff done!! My cousin tinted my windows, i just gotta put my vent window handles back on. I also got my grille in, i just gotta polish it (when it stops raining). Housewise, i did my standard chores, ran the roads, random teenage B.S. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

06-05-2005, 07:43 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	i didnt do a thing truck related this weekend i had to go car shopping on saturday to replace the minivan for my ex wife she bought another dodge but anyway saturday night i went out and today i recovered __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-05-2005, 08:06 PM	#4
1974gmc In Progress Join Date: Feb 2005 Location: Kamloops, BC, Canada Posts: 312	replaced fuel sending unit and put new steps on my box __________________ 1993 Chevrolet K2500 454 4L80E 1974 GMC 1/2t 2wd Stepside 305 auto sold 1985 Ford Mustang GT 5.0 5spd

06-05-2005, 09:13 PM	#6
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Spent all day today 6/5/05 replacing the drivers side ball joints on my K/10. Man that steering arm is a royal PITA to get off. I still have to do the pass side tomorrow and install 2 cat converters and get it reinspected. Fun fun fun... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

06-05-2005, 09:11 PM	#5
mistershadow808 Registered User Join Date: May 2005 Location: Bend, Oregon Posts: 11	took my old exhaust off...put my new exhaust on(took me forever to get the bends...seeing as how i was using bends that i got out of the dumpster of an exhaust shop). once i finished that(which took all of friday night,saturday, and sunday afternoon), i mowed the lawn like a good kid.

06-05-2005, 09:35 PM	#7
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	I actually did something truck related. I replaced my broken exhaust manifold on the blazer and changed the plugs. I know, I know,... not much. First truck stuff in a long time for me. Also cleaned the wife's Avalanche and worked around the house. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

06-05-2005, 11:56 PM	#8
87 Shortwide Registered User Join Date: Nov 2002 Location: Wichita Ks Posts: 536	Installed an A/C unit in the front garage Cleaned up the garage a bit Made the weekend visit to the chassis shop to BS about cars and whatnot Finished up the final touches on my firewall filler panel, it's ready to attach and fill now Went to look at a car lift, then my brother bought it, have to go pick it up this week Changed plugs, ignition module, cap, rotor, and coil in the blazer to try to chase down an idle problem (still not working right) bought a new toolbox for work and put it together Helped a friend install control arm bushings in his car (I had a press, he didn't) I think that's about it... __________________ Daily Driver: 1992 Blazer dropped on rallys Project: 87 GMC shortwide, About to get a little boost

06-06-2005, 01:29 AM	#9
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I traded my Indy Hauler for a Wurlitzer Jukebox (much easier to store...). I completely rearranged a warehouse full of pinball machines and video games and made enough room to fit two cars in it. After that, I drove a big truck back up here so I can move out of the shop I've been renting for three years. I'm looking for a place to buy and build a shop, but I need to get out of this one. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

06-06-2005, 07:52 AM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Nothing for my 74 . . ..... but for the 68 I degreased the power steering pump/brackets I bought last week from fellow board member 'wlarue'. I'm trying to get all the accessories ready for their professional rattle can job. I still have to make or find the trans c-member & then will install the 350/350 into the beater. I also picked up the bedsides for my beater from S.O.S so they wouldn't be tripping over them anymore. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-06-2005, 08:32 AM	#11
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	absolutly nothing truck related but friday night i cleaned out two pig trofts of my mother inlaws made $100.00. sat. and sun. two friends and I laid 1600 sq. ft. of vct in a jewish school that was a little strange. oh yea a beat my dog for tearing up the house i think he was feeling lonely so he thought he would make me stay there and clean his mess up and not leave (just kidding about the beating part) sunday night i had to pick up a lot of tree limbs in the yard qwe had winds up to 90 mph in some spots of town. __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

06-06-2005, 10:45 AM	#12
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	I had to work night shift this weekend so my days off starts today. I have an old Tram cb that I replaced the caps and tubes in awhile back so yesterday I let it run most of the day then peaked and tuned it. Today I'll paint my shop ceiling white. __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496

06-06-2005, 11:03 AM	#13
Earl Filter Registered User Join Date: May 2005 Posts: 212	Brakes! Master cylinder, front calipers, hoses. Rear wheel cylinders still leaking. That's next weekend. __________________ Real Name - Brandon Current Vehicles: 1977 C20 Silverado 454/TH400 3.73s 1989 Jaguar XJ6 in the middle of an LT1/4L60E swap

06-06-2005, 12:13 PM	#14
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Nothing truck related. Moved more stuff and got about 90% of our old house moved to storage.

06-06-2005, 01:30 PM	#15
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	Got the A/C swapped to 134 in the 85 K5, then the heater core started leaking , replaced rear drive shaft u-joints, then headed to the junkyard and picked up a dash bezel(for spare), heater control assembly for the 81K5, and a window regulator for the 70 C-10. Hit Advance autoparts on the way home and picked up 100 bucks worth of stuff. Replaced the fuel filter, wires and heater core on the 85 Saturday afternoon. Sunday cut grass and went to Star Wars movie. good fun. oh yeah, drank me some beeeeers... __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749



Register or Log In To remove these advertisements.

06-06-2005, 10:26 PM	#16
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Got my narrowed rearend back home. Time to start painting!! Did a brake job on a co workers car Friday. Saturday I spent part of the day with my dad helping my brother move. Sunday had a softball league game as usual. Pretty good weekend but no real truck progress. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-06-2005, 11:14 PM	#17
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	I tore the column apart and replaced the turn signal switch & lever and cleaned the steering wheel. __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!

06-07-2005, 12:18 AM	#18
andrew king Registered User Join Date: Apr 2004 Location: Susanville CA, home of 6000 convicts lol Posts: 157	Sold my trusty old 82 chevy 1/2 ton. Some old guy was walking by and offered me $3000.00 for it so an hour later he drove it home lol. At least I still have my crew cab and 3000 to put into it lol

06-07-2005, 10:17 AM	#19
Moostifer a fool with no money Join Date: May 2005 Location: Overton, Tx Posts: 532	friday nite I put a Performer RPM intake on a friend's '76 T.A. that was the easiest intake swap I have ever done! didn't have to pull the dist. or worry about gunk falling down into the lifter valley! Sat went riding around with a friend in his newly aquired Ford stang SVT convertable. I'm not much on fords, but Dang that car is Suweet! and FAST! Sunday- played a round of golf (my newest bad habit)... installed a Barry Grant 220 fuel pump and the fuel cell I made at work last week, installed the new back window that came in from L.M.C, never did like the sliding rear window...... __________________ Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/

06-07-2005, 10:37 AM	#20
sargentjones BOLT SMASHER Join Date: Jan 2005 Location: St.Catharines Posts: 51	I spent most of my time tryin to get this damn cowl on my hood. Lots of sandin, lots of sandin... __________________ Jeff 73 Chevy C-10 350 4-Speed RUST DON'T WAIT FOR NO ONE......

Register or Log In To remove these advertisements.