How does the water flow into the intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 06-09-2005, 11:47 PM

This is a dumb question so here goes. How does water flow into the intake? Does it wait for the thermostat to open?

thanks

72402 · 06-09-2005, 11:51 PM

Water flows into the intake manifold from the heads, through the thermostat, and back into the radiator.

skokie · 06-09-2005, 11:55 PM

So it pulls the water from the bottom and spits it back out through the top. And the thermostat allow more water to flow when it opens?

**kwmech** · 06-10-2005, 12:38 AM

Any hose fitting into the water pump is suction. Pushes into the front of the block and flows from there. When cold the water usually by passes into the heater core. Big blocks have a bypass hose at the intake into the pump.

72402 · 06-10-2005, 12:40 AM

That's it. Thermostat holds the water in the engine until it reaches the set temperature of the thermostat.

06-09-2005, 11:47 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	How does the water flow into the intake This is a dumb question so here goes. How does water flow into the intake? Does it wait for the thermostat to open? thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

06-09-2005, 11:51 PM	#2
72402 Registered User Join Date: Nov 2004 Location: Cameron, Oklahoma Posts: 199	Water flows into the intake manifold from the heads, through the thermostat, and back into the radiator. __________________ 72 Cheyenne SWB Fleet/original 402, TH400, buckets & console 65 C10, 350TBI, 700R4 (work in progress)

06-09-2005, 11:55 PM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	So it pulls the water from the bottom and spits it back out through the top. And the thermostat allow more water to flow when it opens? __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

06-10-2005, 12:40 AM	#5
72402 Registered User Join Date: Nov 2004 Location: Cameron, Oklahoma Posts: 199	That's it. Thermostat holds the water in the engine until it reaches the set temperature of the thermostat. __________________ 72 Cheyenne SWB Fleet/original 402, TH400, buckets & console 65 C10, 350TBI, 700R4 (work in progress)

06-10-2005, 12:38 AM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,503	Any hose fitting into the water pump is suction. Pushes into the front of the block and flows from there. When cold the water usually by passes into the heater core. Big blocks have a bypass hose at the intake into the pump.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.