|
06-14-2005, 06:31 PM
|
#1 |
|
Registered User
Join Date: Jan 2005
Location: middle TN
Posts: 87
|
rubber hose question
Is there a special oil-resistant kinda rubber hose you should use for oil lines? I've got what's marked as "heater hose" and wondering if it would be ok for oil lines.
|
|
|
|
06-14-2005, 07:02 PM
|
#2 |
|
Senior Member
  
Join Date: Jan 2005
Location: CA
Posts: 5,427
|
I believe there is hose marked "EMISSIONS" that is meant for gas/oil.
|
|
|
|
|
06-14-2005, 10:11 PM
|
#3 | |
|
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Quote:
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
|
|
|
|
|
06-14-2005, 10:54 PM
|
#4 | |
|
Registered User
Join Date: Jan 2005
Location: middle TN
Posts: 87
|
Quote:
Last edited by Scooter67; 06-14-2005 at 10:56 PM. |
|
|
|
|
|
06-14-2005, 10:57 PM
|
#5 |
|
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
Fuel line....
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
|
|
|
|
06-14-2005, 11:06 PM
|
#6 | |
|
User #12137
 
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
Quote:
 never thought of doin it anyother way |
|
|
|
|
|
06-15-2005, 12:31 AM
|
#7 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,505
|
Weather head line. H10105 is 5/16. and H10106 is 3/8. H10108 is 1/2. This hose is good up to 300 psi. My local NAPA store has this in stock always.
Last edited by kwmech; 06-15-2005 at 12:31 AM. |
|
|
|
|
06-15-2005, 12:40 AM
|
#8 |
|
Junior Member
Join Date: Jan 2004
Location: Stillwater, Oklahoma
Posts: 63
|
Fuel line is the way to go. They are built around nitril tube (core), and are more resistant than heater hose, which has neoprene core. For the sake of overkill, go down to a farm supply and pick up hose for anhydrous ammonia. It will have at least 2 ply covering, and a huge working and burst pressure. Look for the Underwriters lab endorsement embossed on the hose. All those years at Swan hose taught me just enough to be dangerous,( and that I didn't like factory work)
__________________
72 C10 10 yr.daily driver 68 C10 18 yr.money pit 72 Nova all original 99 H.D. Heritage[sanity check] 71 VW topless bug[summer fun] "When I have the money, I don't have the time ; when I have the time, I don't have the money. |
|
|
|
|
06-15-2005, 09:55 AM
|
#9 |
|
Registered User
Join Date: Jan 2004
Location: Boise
Posts: 64
|
What about tranny cooler hose? I never have trouble finding that stuff.
__________________
If at first you don't succed, break something! 
|
|
|
|
|
06-15-2005, 10:20 AM
|
#10 |
|
Registered User
Join Date: Jan 2005
Location: middle TN
Posts: 87
|
The 1/2 inch diameter is the problem. Most auto parts stores dont carry trans/fuel/oil hose that large. My NAPA doesn't have it either. Fortunately, they referred me to a hydraulics outfit here in town by the name of Patco who does.
Took five phone calls, but NAPA was the first place to give me a good lead. Thanks NAPA. 
|
|
|
|
|
06-15-2005, 10:35 AM
|
#11 |
|
Registered User
Join Date: Jan 2004
Location: Boise
Posts: 64
|
Thats right, the tranny line is usually 3/8. I should have known that, I just bought a bunch so I can use my A/C condenser as a tranny cooler.
__________________
If at first you don't succed, break something!
|
|
|
|
|
06-15-2005, 11:55 AM
|
#12 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
try a boat supply place,or www.westmarine.com part# 447201 @ $4.09 perfoot
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 06-15-2005 at 12:05 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
