What gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean23 · 08-07-2002, 10:31 PM

what rear gears do you like

*Zkast* · 08-07-2002, 10:36 PM

Daily driver has 3:08's and the "have fun" truck will get 4:11.

TERRYP · 08-07-2002, 10:44 PM

Running 3.07's with 200R4, 1700 at 70, very nice

john8746 · 08-07-2002, 10:54 PM

Running a 3.42

Longhorn Man · 08-07-2002, 10:57 PM

I had to mark other..I have the original 3.07 in my GMC.

68 with 350 TPI · 08-07-2002, 11:15 PM

I have a 4.11 posi

Good for take off,smoking the tires,pulling stuff,and with the 700r4 its freeway friendly

Patrick Sullivan · 08-07-2002, 11:31 PM

I have 4.11's (finally went out and counted 'em), but I'm running 32" tires so it doesn't seem like it.

PushinPebbles · 08-08-2002, 12:20 AM

i have 3.73's and my dad has a big ass 4.56 in his but his is a 12 bolt camaro axle

**COBALT** · 08-08-2002, 12:48 AM

I swapped out my 4.10s for 3.90s when I had my locker put in.

*big71* · 08-08-2002, 07:04 AM

my is 373

70c10 · 08-08-2002, 07:56 AM

3:73's

okietruck · 08-08-2002, 08:48 AM

I'm running 3.73 on my 72. I'd like to put an overdrive tranny in to help on the highway.

Bill72BB · 08-08-2002, 10:54 AM

Dana 60 with 3.54 here .

Bill

HYPERMAN · 08-08-2002, 11:07 AM

3.37 WITH A 700R4 AND 275/60/15 BFG.

jmac · 08-08-2002, 11:34 AM

I have both 3.73 and 3.07

Pont · 08-08-2002, 11:45 AM

4.11's in the rear..............................and the front

VNMOUS · 08-08-2002, 01:53 PM

3:08 WITH EATON LOCKER255/60/15 TIRES

jku72 · 08-08-2002, 02:48 PM

3.07, 3.73, and 4.10
I think soon to be 2.67 instead of 3.07.
The 4.10 is a pain, but not much choice for a ho 72.
K5 with 3.73 is heading for junkyard.

Nichboy · 08-08-2002, 03:54 PM

I've got the stock 3:07. What rear end would swap on this truck with no modifications.

View Poll Results: What rear gears do youhave or want
3:08	11	23.91%
3:73	19	41.30%
4:11	10	21.74%
5:13	0	0%
other	6	13.04%
Voters: 46. You may not vote on this poll

08-07-2002, 10:31 PM	#1
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	What gears what rear gears do you like __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

08-07-2002, 10:44 PM	#3
TERRYP GYRO GEARLOOSE Join Date: Jun 2000 Location: Nevada City, CAEverett, WA Posts: 361	Running 3.07's with 200R4, 1700 at 70, very nice __________________ Nevada City, CA Everett, Washington 57 3/4 rat, 235, 3spd 66 C-10 Panel, SWB. 350 from '68, 200R4 tranny, 3.07 rear ratio, restoring 68 C10 LWB 350 4spd, 4.56 rear dump runner 82 Camaro, 305, THM-200-R4 84 Monte Carlo 305 TH350, land tuna 85 Tercel SW, snow runner DISGRACED OUTLAW MEMBER OF THE DRUM BRAKE CLUB

08-07-2002, 10:54 PM	#4
john8746 Registered User Join Date: Nov 2001 Location: Malaga, N.J. Posts: 171	Running a 3.42 __________________ C/10 John N.J.

08-07-2002, 11:15 PM	#6
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	I have a 4.11 posi Good for take off,smoking the tires,pulling stuff,and with the 700r4 its freeway friendly __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

08-07-2002, 10:36 PM	#2
Zkast Account Suspended Join Date: May 2002 Location: Olathe, Kansas Posts: 929	Daily driver has 3:08's and the "have fun" truck will get 4:11.

08-07-2002, 10:57 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I had to mark other..I have the original 3.07 in my GMC.

08-07-2002, 11:31 PM	#7
Patrick Sullivan Transcendental Trucker Join Date: Dec 2001 Location: Rockaway Beach, OR Posts: 374	I have 4.11's (finally went out and counted 'em), but I'm running 32" tires so it doesn't seem like it. __________________ Patrick Sullivan \| sullivan@oregoncoast.com Rockaway Beach, Oregon 1972 Chevy Cheyenne C-20 1998 Dodge Dakota 4x4 So, fill to me the parting glass And drink a health whate'er befalls... Then gently rise and softly call Goodnight and joy be to you all!

08-08-2002, 12:20 AM	#8
PushinPebbles My dad's 68 Join Date: May 2002 Location: VA Posts: 444	i have 3.73's and my dad has a big ass 4.56 in his but his is a 12 bolt camaro axle __________________ Jack M. 67 C-10 SWB 355 built T-350 tranny hurst shifter 17x8in KMC's on michelins, clear tails and back up lights slammedUPDATE i have decided on my bag setup and will post further info when i recieve all the parts **************************** 88 1/2 ton suburban 4x4 350/700R-4having a 9 in lift w/ 38 in tires 4 12 inch Lightning Audios *************************** 87 silverado 3/4ton jacked up 10-12 inches black and rubberized bed coating 35 in michelans ************************** Dad's truck 68 C-10 stepside, 468 BB, tubbed, weld wheels, Nason black,lots more **************************** grand dads truck 68 C-10 stepside fuel inj. 350/700R-4soon in audi silver **************************** 84 toyota pickup 22R 5 speed 2WD slammed, shaved and all the body lines filled w/ buickGN scoop,bout to be sprayed in 2003 mustang green metallic w/ silver flames **************************** S/N=BIGGYTYME@aol.com (hydros) "No fat chics, truck will scrape"

08-08-2002, 12:48 AM	#9
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I swapped out my 4.10s for 3.90s when I had my locker put in. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

08-08-2002, 07:04 AM	#10
big71 Account Suspended Join Date: Nov 2001 Location: JONESVILL NC Posts: 1,303	my is 373

08-08-2002, 07:56 AM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	3:73's __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-08-2002, 08:48 AM	#12
okietruck Registered User Join Date: Apr 2002 Location: Tulsa, OK, USA Posts: 117	I'm running 3.73 on my 72. I'd like to put an overdrive tranny in to help on the highway.

08-08-2002, 10:54 AM	#13
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Dana 60 with 3.54 here . Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

08-08-2002, 11:07 AM	#14
HYPERMAN Registered User Join Date: Mar 2000 Location: Moncton, New Brunswick Posts: 239	3.37 WITH A 700R4 AND 275/60/15 BFG.



Register or Log In To remove these advertisements.

08-08-2002, 11:34 AM	#15
jmac Registered User Join Date: Oct 2001 Location: Maxton, NC Posts: 20	I have both 3.73 and 3.07

08-08-2002, 11:45 AM	#16
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	4.11's in the rear..............................and the front __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

08-08-2002, 01:53 PM	#17
VNMOUS Step Side's Rule Join Date: Feb 2002 Location: LEIGHTON,AL USA Posts: 227	3:08 WITH EATON LOCKER255/60/15 TIRES __________________ DANO 07 Silverado Classic 67shortstep 76 stingray 95 cobra 66 Mustang Coupe 289

08-08-2002, 02:48 PM	#18
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	3.07, 3.73, and 4.10 I think soon to be 2.67 instead of 3.07. The 4.10 is a pain, but not much choice for a ho 72. K5 with 3.73 is heading for junkyard. __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

08-08-2002, 03:54 PM	#19
Nichboy Registered User Join Date: Jun 2001 Location: Oklahoma City Oklahoma Posts: 173	I've got the stock 3:07. What rear end would swap on this truck with no modifications. __________________ 1971 Chevy SWB Oklahoma City, Oklahoma

Register or Log In To remove these advertisements.