WTB pto for 4 spd 2wd 70 model or sell a wrecker project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 06-22-2005, 01:16 AM

Need the pto to complete the need list or will sell the truck 1 ton 2wd 70 GMC no motor body very rough make a good yard truck bed is a welders bed with an old 440 holmes boom and winch is manual over hydaulic (chain driven pump runs off pto) let me know if you have the part or want the truck 600 takes the truck thanks Mike

**tnblazerk5** · 06-22-2005, 01:19 AM

you got pics of the truck ? is it a srw or drw ?

muddyole 69 · 06-22-2005, 03:34 AM

Pics are no problem will get them in the am 2wd drw with I believe a 4.56 posi rear thanks for looking Mike

**JIMs70GMC** · 06-22-2005, 05:39 AM

You know what tranny? I have a PTO for a NP435 4 spd that was found in these trucks, tranny has one pto cover. The SM465 has 2 covers.

**special-K** · 06-22-2005, 07:39 AM

Don`t give up on it.You`ll find a pto.Also,there`s other ways to drive that winch.There`s that guy with a GMC/3500 dump posting here.Wants to part it.Talk to him.

boraxman · 06-22-2005, 08:23 AM

I have a PTO for the sm420 $60 shipped.

Rod · 06-22-2005, 10:10 AM

Probasbly a sm465 in that 70. I thiunk all I have left is a 8000 lbs braden winch and a PTO for a sm465. I dont really want to seperate. They came off a 1970 chev 1 ton duallie with a sm465. Looking for $380 Canadian for the package

muddyole 69 · 06-22-2005, 02:03 PM

Thanks for the replies fellas.

I am considering a couple of offers on the truck hope someone with more time than me gets the old girl and puts her back into service pics are available I am trying to load now Mike

muddyole 69 · 06-22-2005, 02:07 PM

I do have the sling for the rear of the wrecker no wheel lift this is an old lady but definitely plenty of llife left in her thanks for looking mike

muddyole 69 · 06-23-2005, 08:51 AM

ttt

06-22-2005, 01:16 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	WTB pto for 4 spd 2wd 70 model or sell a wrecker project Need the pto to complete the need list or will sell the truck 1 ton 2wd 70 GMC no motor body very rough make a good yard truck bed is a welders bed with an old 440 holmes boom and winch is manual over hydaulic (chain driven pump runs off pto) let me know if you have the part or want the truck 600 takes the truck thanks Mike __________________ hav'n fun be'n me

06-22-2005, 03:34 AM	#3
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	truck Pics are no problem will get them in the am 2wd drw with I believe a 4.56 posi rear thanks for looking Mike __________________ hav'n fun be'n me Last edited by muddyole 69; 06-22-2005 at 03:36 AM.

06-22-2005, 05:39 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	You know what tranny? I have a PTO for a NP435 4 spd that was found in these trucks, tranny has one pto cover. The SM465 has 2 covers. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-22-2005, 07:39 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Don`t give up on it.You`ll find a pto.Also,there`s other ways to drive that winch.There`s that guy with a GMC/3500 dump posting here.Wants to part it.Talk to him. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2005, 08:23 AM	#6
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	I have a PTO for the sm420 $60 shipped. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

06-22-2005, 01:19 AM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	you got pics of the truck ? is it a srw or drw ?

06-22-2005, 10:10 AM	#7
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Probasbly a sm465 in that 70. I thiunk all I have left is a 8000 lbs braden winch and a PTO for a sm465. I dont really want to seperate. They came off a 1970 chev 1 ton duallie with a sm465. Looking for $380 Canadian for the package

06-22-2005, 02:03 PM	#8
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	wrecker project Thanks for the replies fellas. I am considering a couple of offers on the truck hope someone with more time than me gets the old girl and puts her back into service pics are available I am trying to load now Mike Attached Images __________________ hav'n fun be'n me

06-22-2005, 02:07 PM	#9
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	wrecker I do have the sling for the rear of the wrecker no wheel lift this is an old lady but definitely plenty of llife left in her thanks for looking mike Attached Images __________________ hav'n fun be'n me

06-23-2005, 08:51 AM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	truck ttt __________________ hav'n fun be'n me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.