|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-24-2005, 12:22 PM
|
#1 |
|
Head Peon
 
Join Date: Dec 1999
Location: Imlay City MI
Posts: 295
|
Is 8" Notch big enough?
To lay frame on my '88 burb with a 30" tire...or should I go with a 10"? I did some simple measuring (frame is 8" of ground right now, axle tube is 2" from touching the frame) drew it up quick in CAD and it seems like I should have 1" clearance to the top inside of the notch. Anybody have any input?
__________________
'72 Suburban, factory tilt, tach, front & rear AC, front & rear disc brakes, 383/700-R4 Last edited by Shev; 06-24-2005 at 12:33 PM. |
|
|
|
06-24-2005, 12:50 PM
|
#2 |
|
Registered User
Join Date: Jun 2002
Location: Tri Valley California
Posts: 792
|
Sounds about right! When or if you lift the front first then a 10 inch notch will give you room to go lower in the rear. If you run a 8 inch the rearend will hit the notch if the front goes up first. Make Sense....
|
|
|
|
|
06-24-2005, 01:37 PM
|
#3 |
|
Head Peon
Join Date: Dec 1999
Location: Imlay City MI
Posts: 295
|
Thanx Fast, I was only thinking of laying...I think I'll go with 10" just to be safe and I think that will give me the option of putting my F9000's over the axle if the need arises.
__________________
'72 Suburban, factory tilt, tach, front & rear AC, front & rear disc brakes, 383/700-R4 |
|
|
|
|
06-24-2005, 08:00 PM
|
#4 |
|
Registered User
Join Date: Apr 2004
Location: Las Vegas
Posts: 225
|
shev... are talking 10" from the bottom of the current frame to the bottom of the notch? ive got an 88 cc dually in need of a notch and bags as well.
also is your burb 3/4 ton? how far does your frame hang below your rocker pinch weld? Last edited by slammd72; 06-24-2005 at 08:01 PM. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
