15x10's on a stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jnelson · 08-09-2002, 09:41 PM

Any one know what back spacing I would need to fit 15x10 under the back fenders of a step side, if that is possible with no rubbing. I have a 4/6 drop. THANKS

XXL · 08-09-2002, 10:45 PM

It depends on the tire you are going to run, but I don't think you can do it. Look at 15 x 8 and you're going to be much happier with the fit.

Kenneth

Dropped67step · 08-10-2002, 12:20 AM

Well I am running a 3-5 drop and a 15x10 welds in the rear and a 295x50x15 bfg will measure back spacing tommorow after work and let you know .

PushinPebbles · 08-10-2002, 12:23 AM

good luck!

Dropped67step · 08-10-2002, 01:12 AM

Why do you say good luck? I bought them from a friend that has a 68 swb step side and he ran the wheels with the same tire size for over a year? So why good lick? Its being done.

08-09-2002, 09:41 PM	#1
jnelson Registered User Join Date: Jun 2002 Location: jacksonville fl. Posts: 56	15x10's on a stepside Any one know what back spacing I would need to fit 15x10 under the back fenders of a step side, if that is possible with no rubbing. I have a 4/6 drop. THANKS __________________ looking for a new project

08-09-2002, 10:45 PM	#2
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	It depends on the tire you are going to run, but I don't think you can do it. Look at 15 x 8 and you're going to be much happier with the fit. Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

08-10-2002, 12:23 AM	#4
PushinPebbles My dad's 68 Join Date: May 2002 Location: VA Posts: 444	good luck! __________________ Jack M. 67 C-10 SWB 355 built T-350 tranny hurst shifter 17x8in KMC's on michelins, clear tails and back up lights slammedUPDATE i have decided on my bag setup and will post further info when i recieve all the parts **************************** 88 1/2 ton suburban 4x4 350/700R-4having a 9 in lift w/ 38 in tires 4 12 inch Lightning Audios *************************** 87 silverado 3/4ton jacked up 10-12 inches black and rubberized bed coating 35 in michelans ************************** Dad's truck 68 C-10 stepside, 468 BB, tubbed, weld wheels, Nason black,lots more **************************** grand dads truck 68 C-10 stepside fuel inj. 350/700R-4soon in audi silver **************************** 84 toyota pickup 22R 5 speed 2WD slammed, shaved and all the body lines filled w/ buickGN scoop,bout to be sprayed in 2003 mustang green metallic w/ silver flames **************************** S/N=BIGGYTYME@aol.com (hydros) "No fat chics, truck will scrape"

08-10-2002, 12:20 AM	#3
Dropped67step Gearhead since birth Join Date: Jul 2002 Location: Ft. Worth TX. Posts: 190	Well I am running a 3-5 drop and a 15x10 welds in the rear and a 295x50x15 bfg will measure back spacing tommorow after work and let you know .

08-10-2002, 01:12 AM	#5
Dropped67step Gearhead since birth Join Date: Jul 2002 Location: Ft. Worth TX. Posts: 190	Why do you say good luck? I bought them from a friend that has a 68 swb step side and he ran the wheels with the same tire size for over a year? So why good lick? Its being done.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.