How to remove a grille?

[62ChevyStep]

I have a 62' Chevy and the PO put the wrong grille on, anyhow I cannot figure out how to take it off? I looked around by the radiator don't see the bolts, looked inside of the fenders, dont see them...... can anyone help me please?

I know this sounds so stupid and easy but I am stumped.

Thanks in advance.

[65stepside]

Look inside the fender wells and on the grille support panel, which is what the grille is mounted on. There should be 4 bolts on each side that attach the grille. There should be 2 bolts on each side of the outer side of the grille and 2 just inside from the bezels.

[62ChevyStep]

Originally Posted by 65stepside

Look inside the fender wells and on the grille support panel, which is what the grille is mounted on. There should be 4 bolts on each side that attach the grille. There should be 2 bolts on each side of the outer side of the grille and 2 just inside from the bezels.

Do I pull the bezels to access the two inside? are the bolt heads on the radiator support side or grille side?

I will check again thanks for the help

Any pic's?

[Demmit_Hemmit's 65]

THERE IS NO NEED TO PULL THE BEZELS AS ALL THE BOLTS YOU NEED TO TAKE OFF ARE BEHIND THE GRILL SUPPORT LIKE 65stepside EXPLAINED............DON'T FORGET TO DISCONNECT THE WIRES FOR THE HEADLIGHTS..................IT WOULDN'T HURT TO HAVE SOMEONE HOLD THE GRILL WHEN YOU TAKE THE LAST OF THE BOLTS OUT....................HEMMIT