350 dipsticks for 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 06-22-2005, 08:19 PM

I am looking for a source for the 4x4 dipsticks and tubes for the small block engine. Here is a pic of what I am looking for.

Jim

**JIMs70GMC** · 06-22-2005, 08:24 PM

Jim, Isn't that a van set-up? My 70 is under the booster of course the truck had manual brakes and was converted to power by a PO. So i'm not sure, that would make it easier on a lifted truck.

junkyardjohn · 06-22-2005, 08:45 PM

I'VE GOT A VAN PICKUP TUBE & DIPSTICK UIN MY 71 BLAZER. IT COMES OUT RIGHT ON TOP OF MY ALTERNATOR ON THE DRIVERS SIDE. IT COMES IN REAL HANDY FOR ME. I CAN CHECK MY OIL STANDING FLAT FOOTED ON THE GROUND, & MY @SS IS BUILT KINDA CLOSE TO THE SIDEWALK IF YOU KNOW WHAT I MEAN.

JOHN

sakohntr · 06-22-2005, 11:41 PM

Somebody said that is supposedly the same dipstick as a big block chevelle and you can get them from one of those restoration outfits. I try and snag everyone of them sticks from the junkyard but usually somebody has changed the motor at one time or another and they never put the correct one back in.
Keep lookin.........

RainFade · 06-23-2005, 09:52 AM

Quote:

Originally Posted by JIMs70GMC

Jim, Isn't that a van set-up? My 70 is under the booster of course the truck had manual brakes and was converted to power by a PO. So i'm not sure, that would make it easier on a lifted truck.

So does my 71 and it was factory power disc brakes.
That dipstick would beat the heck out of balancing on a 5 gallon bucket to reach the current dip stick under the booster and way too close to the headers

72 Cheyenne K20 · 06-25-2005, 02:34 PM

Hey Jim, I'm having the same prob. My K20 has this set up and i can't find the right stick for it. I'm going to a yard this weekend to look for one. I'll let you know if I find one for you.

Scott

6869704X4 · 06-28-2005, 09:52 AM

I went one step further and used the extended oil fill tube (the one with the cool 710 cap) from a van. Now I can check the oil and add some standing on the ground. Sure made oil changes easier.

Jason71k10 · 06-28-2005, 08:15 PM

Mine also has factory power discs with the shorty dipstick....PITA!!

06-22-2005, 08:19 PM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	350 dipsticks for 4x4 I am looking for a source for the 4x4 dipsticks and tubes for the small block engine. Here is a pic of what I am looking for. Jim Attached Images

06-22-2005, 08:24 PM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Jim, Isn't that a van set-up? My 70 is under the booster of course the truck had manual brakes and was converted to power by a PO. So i'm not sure, that would make it easier on a lifted truck. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

06-22-2005, 08:45 PM	#3
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	I'VE GOT A VAN PICKUP TUBE & DIPSTICK UIN MY 71 BLAZER. IT COMES OUT RIGHT ON TOP OF MY ALTERNATOR ON THE DRIVERS SIDE. IT COMES IN REAL HANDY FOR ME. I CAN CHECK MY OIL STANDING FLAT FOOTED ON THE GROUND, & MY @SS IS BUILT KINDA CLOSE TO THE SIDEWALK IF YOU KNOW WHAT I MEAN. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

06-22-2005, 11:41 PM	#4
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	dipstick Somebody said that is supposedly the same dipstick as a big block chevelle and you can get them from one of those restoration outfits. I try and snag everyone of them sticks from the junkyard but usually somebody has changed the motor at one time or another and they never put the correct one back in. Keep lookin......... __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

06-28-2005, 09:52 AM	#7
6869704X4 Registered User Join Date: Jul 2002 Location: SE NM Posts: 769	I went one step further and used the extended oil fill tube (the one with the cool 710 cap) from a van. Now I can check the oil and add some standing on the ground. Sure made oil changes easier. __________________ The more I learn about women, the more I love my truck.

06-25-2005, 02:34 PM	#6
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Hey Jim, I'm having the same prob. My K20 has this set up and i can't find the right stick for it. I'm going to a yard this weekend to look for one. I'll let you know if I find one for you. Scott

06-28-2005, 08:15 PM	#8
Jason71k10 ready for reassembly Join Date: Jun 2002 Location: Barrie ONT, Canada Posts: 413	Mine also has factory power discs with the shorty dipstick....PITA!! __________________ stock 71 4x4 2003 Jeep Liberty, rocky mountain edition I'm obsessed, and wouldn't have it any other way!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.